Structural dynamic displacement vision system using digital image processing

This study introduces dynamic displacement vision system (DDVS), which is applicable for imaging unapproachable structures using a hand-held digital video camcorder and is more economical than the existing contact and contactless measurement methods of dynamic displacement and deformation. This proposed DDVS method is applied to the Region of Interest (ROI) resizing and coefficient updating at each time step to improve the accuracy of the measurement from the digital image. Thus, after evaluating the algorithms conducted in this study by the static and dynamic verification, the measurement's usability by calculating the dynamic displacement of the masonry specimen, and the two-story steel frame specimen is evaluated under uniaxial seismic loading. The algorithm of the proposed method in this study, despite the relatively low resolution during frozen, slow, and seismic motions, has precision and usability that can replace the existing displacement transducer. Moreover, the method can be effectively applied to even fast behavior for multi-measurement positions like the seismic simulation test using large scale specimen. DDVS, using the consecutive images of the structures with an economic, hand-held digital video camcorder is a more economical displacement sensing concept than the existing contact and contactless measurement methods.     

Enhancement of antioxidant and antimicrobial activities of Dianthus superbus,Polygonum aviculare,Sophora flavescens,and Lygodium japonicum by pressure-assisted water extraction

The phenol amount of Lygodium japonicum extracted by the pressure-assisted water extraction (PAWE) was noticeably increased to 12.8mg GAE/g when compared to the conventional extraction (9.3 mg GAE/g) (p<0.05). The highest antioxidant activity was observed at Polygonum aviculare extracted by the PAWE, showing the lowest EC₅₀ value of 0.09 mg/mL. The lowest minimum inhibitory concentrations (MIC₉₉) of L. japonicum extracted by the PAWE were 2.59, 3.33, and 7.37 mg/mL, respectively, against Listeria monocytogenes, Salmonella Typhimurium, and Propionibacterium acnes. These results suggest that the PAWE can be an appropriate extraction method for enhancing biological and pharmaceutical properties of medicinal plants.     

Correlation of Microstructure and Hydrogen Delayed Fracture for 1GPa Steels

Automobile industry tries to reduce the weight of automobile using high-strength steels.However,the high-strength steels are highly susceptible to delayed-fracture caused by hydrogen embrittlement.With increasing the strength,hydrogen embrittlement is more sensitive to diffusible hydrogen.The mechanism of delayed-fracture and the relationship with the microstructure and alloying elements are still ambiguous.This study analyzed the effect of the size and the spheroidization rate for the carbides on hydrogen-induced delayed fracture for 1GPa TS steel.     

Tooling device design for vibration-assisted high speed shaping of PMMA

PMMA optical components that are used as one of the most important parts of high precision equipments and machines are increasingly replacing the glass due to the various advantages of PMMA. Especially in Light Guide Panels, the PMMA sheet that is used in Liquid Crystal Displays plays an important role in scattering the incident light and requires very fine machining as the sheet is directly related to the optical characteristics of the panels. The High Speed End milling and High Speed Shaping processes that are widely adopted and applied to the precise machining of Light Incident Plane still have quality problems, such as cracks, breakages, poor waviness, and straightness. This paper presents the tooling device design for machining a Light Incident Plane through vibration-assisted High Speed Shaping for increasing the optical quality by minimizing the above-mentioned problems. The cutting tool and the tool post presented in this paper are designed by the authors to increase the magnitude of the cutting stroke by adopting the resonant frequency without weakening the stiffness and to reduce vibrations during even high speed feeding. The dynamic characteristics of the cutting tool and the tool post are evaluated through simulation and experiment as well. The results reveal very appropriate dynamic characteristics for vibration-assisted High Speed Shaping.     

Spontaneous assimilation of continuous values and temporal information in causal induction.

Existing models of causal induction primarily rely on the contingency between the presence and the absence of a causal candidate and an effect. Yet, classification of observations into these four types of covariation data may not be straightforward because (a) most causal candidates, in real life, are continuous with ambiguous, intermediate values and because (b) effects may unfold after some temporal lag, providing ambiguous contingency information. Although past studies suggested various reasons why ambiguous information may not be used during causal induction, the authors examined whether learners spontaneously use ambiguous information through a process called causal assimilation. In particular, the authors examined whether learners willingly place ambiguous observations into one of the categories relevant to the causal hypothesis, in accordance with their current causal beliefs. In Experiment 1, people's frequency estimates of contingency data reflected that information ambiguous along a continuous quantity dimension was spontaneously categorized and assimilated in a causal induction task. This assimilation process was moderated by the strength of the upheld causal hypothesis (Experiment 2), could alter the overall perception of a causal relationship (Experiment 3), and could occur over temporal sequences (Experiment 4). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Entwicklungen von verschleiß-und korrosionsbeständigen Oberflächensystemen. Development of wear and corrosion resistant surface syatems

Develpoment of wear and corrosion resistant surface systems In this study two methods are described to realize wear and corrosion resistant surface systems: Plasma diffusion treatment (PDT) and Plasma assited CVD (PACVD). Plasma nitriding, Plasma nitrocarburizing and plasma boriding are used to treat different kinds of substrates. The advances of PACVD and the development of low temperature PACVD and industrial applications of these techniques are explained.