Partial error tolerance for bit-plane FIR filter architecture

Whereas some applications require correct computation many others do not. A large domain where perfect functional performance is not always required is multimedia and DSP systems. Relaxing the requirement of 100% correctness for devices and interconnections may dramatically reduce costs of manufacturing, verification, and testing. The goal of this paper is to develop a method for trading computational correctness for an additional chip area involved by fault-tolerance implementation. The method is demonstrated for the BP array in the following way: only the most significant bits of the output word are made fault-tolerant. By introducing the concept of partially error-tolerant BP array, designers achieve one more degree of tradeoff freedom. Formal definitions of the proposed terms are given. A mathematical path based on transitive closure that generates an error significance map for the BP array is proposed. The design tradeoff is demonstrated through FPGA implementation. The achieved area savings are presented as a function of a number of most significant fault-tolerant bits.     

Finite element modeling of electromagnetic signal propagation in aphantom arm

Improving the control of artificial arms remains a considerable challenge. It may be possible to graft remaining peripheral nerves in an amputated limb to spare muscles in or near the residual limb and use these nerve-muscle grafts as additional myoelectric control signals. This would allow simultaneous control of multiple degrees of freedom (DOF) and could greatly improve the control of artificial limbs. For this technique to be successful, the electromyography (EMG) signals from the nerve-muscle grafts would need to be independent of each other with minimal crosstalk. To study EMG signal propagation and quantify crosstalk, finite element (FE) models were developed in a phantom-arm model. The models were validated with experimental data collected by applying sinusoidal excitations to a phantom-arm model and recording the surface electric potential distribution. There was a very high correlation (r>0.99) between the FEM data and the experimental data, with the error in signal magnitude generally less than 5%. Simulations were then performed using muscle dielectric properties with static, complex, and full electromagnetic solvers. The results indicate that significant displacement currents can develop (>50% of total current) and that the fall-off of surface signal power varies with how the signal source is modeled     

Die stress drift measurement in IC plastic packages using the piezo-Hall effect

A method for encapsulation stress drift measurement based on the piezo-Hall effect is proposed. Accuracy of ±0.25 MPa for the sum of in-plane normal stresses is achieved. Using this method, the drift of die stress in IC plastic packages has been measured after temperature cycling. Stress relaxation with the time constant of about one day has been observed.     

Non-Uniform Traffic Issues in DCA Wireless Multimedia Networks

Wireless networks that utilize dynamic channel allocation (DCA) are known to perform better than those with fixed channel allocation, in terms of the call level QoS measures such as the handoff dropping probability. On account of this, the DCA networks are usually designed without the call admission control (CAC). However, given the decrease of cell sizes, together with ever increasing mobile phone and terminal population, dynamic channel allocation policies (such as channel borrowing) may not be sufficient to cope with the hot-spot area size and its traffic intensity. This paper analyses the performance of the DCA networks, both with and without the call admission control, under the hot-spot traffic regime. In such cases, the pure DCA approach fails to ensure sufficiently low level of QoS in both the hot-spot area and the surrounding cells. We propose a CAC policy that can stabilize the QoS under non-uniform traffic, whilst being easy to integrate in the distributed DCA policies.     

Lipids present in olive skin

Olive oil is a major constituent of many food preparations and is used in margarine and as a cooking oil. Olive oil consists of lipidic components, mainly fatty acids, in differing proportions depending on the source of the olive and the method of preparation. Although several studies have been made on the lipid composition of the extracted oil, no detailed analysis has been made on olive skin as a discrete entity. Analysis by gas chromatography (GC) of an olive skin extract showed oleic acid (61.45%), palmitic acid (15.28%) and linoleic acid (11.69%) to predominate. Smaller amounts of other fatty acids, not previously detected in olive fruit, were also found to be present in olive skin.     

The measurement of minimotors and micromotors torque-characteristic using miniaturized cable brake

 A miniaturized torque sensor based on cable brake principle for the measurement of torque-characteristic of minimotors and micromotors has been developed. The first generation torque sensor enables the measurement of torque of minimotors in the range of μNm. Design principles and the production process are described. Experimental results show fair conformity with technical data for minimotors. Received: 30 October 1996 / Accepted: 14 November 1996     

The emerging diversity of the electrophoretic types of Vibrio cholerae in the Western Hemisphere

Since the Latin American cholera epidemic began in 1991, 447 isolates of Vibrio cholerae O1 from the Western Hemisphere have been assayed by multilocus enzyme electrophoresis (MEE) to determine allelic variation among 16 enzyme-encoding genes. Two electrophoretic types (ETs) were identified among toxigenic isolates from Latin America: 323 were ET 4, the ET associated with the Latin American epidemic, and 29 were ET 3. Twenty-three of these ET 3 isolates had a distinctive antimicrobial resistance pattern also seen in isolates imported into the United States from Latin America and Southeast Asia. These resistant isolates had an identical ribotype and nearly identical pulsed-field gel electrophoresis (PFGE) patterns. Most nontoxigenic isolates analyzed were not precursors or descendants of toxigenic epidemic strains. MEE provided a population genetic frame-work for the interpretation of PFGE and ribotype data from the isolates in this study. All three methods identified 2 distinct strains of toxigenic V. cholerae O1 currently epidemic in Latin America.     

Melt granulation in fluidized bed: a comparative study of spray-on versus in situ procedure

Objective: The aim of this study was to investigate the influence of process parameters, binder content and binder addition method on characteristics of the granules obtained by melt granulation (MG) in fluidized bed.

Methods: Spray-on experiments were performed according to 2³ full factorial design. The effect of binder content, molten binder feed rate, and spray air pressure on granule size and size distribution, granule shape, ?owability and drug release rate was investigated. In the in situ experiments, the influence of binder particle size and binder content was evaluated. Solid-state characterization was performed by means of differential scanning calorimetry, X-ray powder diffraction and Fourier transform infrared spectroscopy.

Results: Size of the granules obtained by spray-on procedure was significantly influenced by binder content and spray air pressure, while the width of particle size distribution was mainly affected by binder feed rate. Spray air pressure showed the most significant influence on granule shape. It was shown that smooth and spherical particles with good flow properties may be obtained by both procedures, spray-on and in situ MG. The results obtained indicated the influence of agglomeration mechanism on granule sphericity, with higher degree of granule sphericity observed when immersion and layering was the dominant mechanism. Paracetamol release from granulates was very rapid, but after compression of the granules into tablets, drug release was considerably slower. Solid-state analysis confirmed that the physical form of the granulate components remained unaffected after the MG process.

Conclusion: The results presented indicate that MG in fluidized bed could be a good alternative to conventional granulation techniques.     

An investigation of sensible heat fluxes at a green roof in a laboratory setup

During the last few years, several models have been proposed for the calculation of green roof thermal behavior, but the validation studies of such models are lacking a comprehensive set of highly accurate data. In this study, an experimental laboratory setup was used to create different environmental conditions and to measure sensible heat fluxes to/from a vegetated roof assembly. This experimental setup has been successfully used for different wind velocities (0–3 m/s) to create free and forced convection conditions around green roof tested samples. Furthermore, our study proposed a “basic model” for calculations of the convective heat transfer at green roof assemblies, which is a modified version of the Newton’s cooling law, calibrated and then validated with different sets of data. For forced convection flow regimes, the proposed “basic model” resulted in RMSE (Root Mean Square Error) of 11 W/m² and R² value of 0.81. Similarly, the model provided RMSE of 6.6 W/m² and R² of 0.90 for sensible heat fluxes with free convection conditions. In the future, this model will be used in on-site experimental studies to understand its performance under wind conditions that exhibit a much wider range than the studied velocity range near the leaf canopy.