Polymer translational diffusion: 2. Non-theta solutions,polystyrene in butan-2-one

The diffusion of linear polystyrene under non-theta conditions in butan-2-one has been studied by Rayleigh light scattered linewidth measurements for the molecular weight range of 2.08 × 10⁶ to 8.7 × 10⁶ and as a function of concentration. By extrapolation of diffusion coefficient values to zero concentration we find that $\text{D}{}_0\text{= 5.5 × 10}{}^{\mathrm{?4}}\text{M}\text{?}{}^{\mathrm{?0.561}}{}_{\mathrm{w}}\text{cm}{}^2\text{s}{}^{\mathrm{?1}}$. The first order concentration dependence $\text{k}{}_{\mathrm{<mtext>d</mtext>}}\text{c}$ changes sign as the molecular weight increases, $\text{k}{}_{\mathrm{<mtext>d</mtext>}}$ being fairly small and negative at low molecular weights and increasingly positive above $\text{M}\text{?}{}_{\mathrm{w}}\text{?230 000}$.     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

Automated interpretation and accessible presentation of technical diagrams for blind people

The EU-supported TeDUB (Technical Drawings Understanding for the Blind) project is developing a software system that aims to make technical diagrams accessible to blind and visually impaired people. It consists of two separate modules: one that analyses drawings either semi-automatically or automatically, and one that presents the results of this analysis to blind people and allows them to interact with it. The system is capable of analysing and presenting diagrams from a number of formally defined domains. A diagram enters the system as one of two types: first, diagrams contained in bitmap images, which do not explicitly contain the semantic structure of their content and thus have to be interpreted by the system, and second, diagrams obtained in a semantically enriched format that already yields this structure. The TeDUB system provides blind users with an interface to navigate and annotate these diagrams using a number of input and output devices. Extensive user evaluations have been carried out and an overall positive response from the participants has shown the effectiveness of the approach.     

A new adaptive backstepping Coulomb friction compensator for servo control systems

A new Coulomb friction compensator is proposed for servo control systems in this paper. The novelty of the new approach lies in its capability of assigning the eigenvalues of the resulting closed loop system while attacking the problem. First, based on the standard backstepping methodology, an implicit Lyapunov function, with part of the components being only symbolically constructed at the very beginning, is utilized. To increase the robustness of the system against disturbance and model inaccuracy, an integral term is employed in the design. Using part of the variable gradient method, we are able to turn the implicit Lyapunov function into an explicit one, which is positive definite, and whose time‐derivative is negative definite. Second, it will be shown that the resulting closed loop error system is a switched linear system with two possible active modes that share the same set of eigenvalues, which is at our disposal. Unlike the common adaptive control design methods, such as the Control Lyapunov Function approach, in which the gains are typically positive but otherwise arbitrary, and are hence difficult to choose and have a lack of connection with the system's performance, our new scheme imposes two further constraints on the gains. It turns out that we can then match these gains with the coefficients of the desired characteristic equation of the closed loop system. In this respect, the gains are linked to the system's overall performance, which is a new and very appealing feature for such a scheme. Finally, a procedure of constructing a common Lyapunov function is provided to prove exponential stability of the aforementioned switched linear system. In addition, using the invariance principle, we will show the convergence of the estimated Coulomb friction coefficient to its real value. Numerical simulations are given to validate the effectiveness of the design and its robustness against friction time‐variations. Compared to existing results, the proposed scheme is much simpler, hence, much more advantageous computationally. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Comparison of the ageing behaviour of PM 2124 Al alloy and Al-SiCp metal-matrix composite

The ageing response of 2124 Al-SiC particulate metal-matrix composite (MMC) and unreinforced alloy has been examined using hardness measurements and Arrhenius analysis. The formation of phases during precipitation has been studied using differential scanning calorimetry (DSC). The MMC exhibits accelerated ageing compared to unreinforced alloy, due to enhanced S formation. The activation energy for diffusion is lower in the MMC than in the unreinforced alloy. DSC scans show Guinier-Preston B (GPB) zone nucleation to occur at a lower temperature in the MMC, whilst the total volume of GPB zones formed is smaller than in the unreinforced alloy. A model has been proposed to explain the GPB zone formation behaviour, in which ease of GPB zone nucleation varies within the MMC, as a function of ageing time and of position within the matrix. S formation is enhanced in the MMC because of improved diffusion and a large increase in density of heterogeneous nucleation sites compared to the unreinforced alloy.     

Noniterative compensation for the distance-dependent detector response and photon attenuation in SPECT imaging

A filtering approach is described, which accurately compensates for the 2D distance-dependent detector response, as well as for photon attenuation in a uniform attenuating medium. The filtering method is based on the frequency distance principle (FDP) which states that points in the object at a specific source-to-detector distance provide the most significant contribution to specified frequency regions in the discrete Fourier transform (DFT) of the sinogram. By modeling the detector point spread function as a 2D Gaussian function whose width is dependent on the source-to-detector distance, a spatially variant inverse filter can be computed and applied to the 3D DFT of the set of all sinogram slices. To minimize noise amplification the inverse filter is rolled off at high frequencies by using a previously published Wiener filter strategy. Attenuation compensation is performed with Bellini's method. It was observed that the tomographic point response, after distance-dependent filtering with the FDP, was approximately isotropic and varied substantially less with position than that obtained with other correction methods. Furthermore, it was shown that processing with this filtering technique provides reconstructions with minimal degradation in image fidelity.     

Chromium-doped forsterite: the influence of crystal characteristics on laser performance

A study of the dependence of the gain-switched laser operation of chromium forsterite on crystal parameters is presented. Results are reported for a wide range of chromium (IV) ion concentration: 0.02-0.12 at. % and 12-41 figure of merit, with emphasis on performance of the recently developed material with a dopant level of >0.10 at. %. Threshold and slope efficiency calculations are compared with measured performance for all crystals, with variation of pump polarization and output coupling. With 3% output coupling, the lowest threshold of 1.8 mJ, and highest slope efficiency of 13% were measured for a short, high-dopant-level crystal. With 33% output coupling a slope efficiency of 44% was measured for this crystal. Results demonstrate the considerable potential of short, high-dopant-level crystals for applications such as amplification, diode pumping, and narrow-bandwidth operation.     

Developing a framework for analyzing IS sourcing

This paper develops a framework for the consideration of internal markets as an alternative to information systems (IS) outsourcing. It is based on an assessment of the pros and cons of both outsourcing and of insourcing based on the internal markets approach. It is formulated in terms of the operational, tactical, and strategic impacts of the choice among the alternatives. The framework, and the propositions that are developed from it, should be useful both for researchers, who can use it for developing testable research hypotheses, and for practitioners, who may use it as a basis for developing a comprehensive set of criteria for the evaluation of these sourcing options.     

Exploiting Network Locality for CC-NUMA Multiprocessors

The Journal of Supercomputing - Rapid advances in interconnection networks in multiprocessors are closing the gap between computation and communication. Given this trend, how can we utilize fast...