Optical fiber sensor based on differential spectroscopic absorption

A material sensor based on differential spectroscopic absorption is proposed. The presence of a foreign material in a medium embodying the fiber sensor results in power attenuation at some particular wavelengths. This attenuation, which may be used for measuring the amount of the lossy material, is theoretically analyzed for the case of single-mode operation. A sensitivity analysis is carried out, and some design considerations are discussed.     

Calculation of the wetted area of a planing hull with a chine

Summary The extent to which a low-aspect-ratio flat ship with a chined hull is wetted when planing at infinite Froude number is investigated. A numerical method of solution for the wetted area, which is applicable to more general planing problems, is presented. The results obtained by this method are compared with those found by solving the inverse problem of determining the hull shape which produces a given waterplane shape and are shown to be in excellent agreement. Results are also presented which indicate that a vertical chine may be used to fix the shape of the wetted region.     

Craze intersections in biaxially-stressed polystyrene

Crazes are produced on two orthogonal planes in both thin film and macroscopic samples of polystyrene by sequentially applying two orthogonal tensile strains ₁ and ₂. Although many crazes produced by the second strain ₂ (secondary crazes) are stopped when they meet a primary craze, some intersections occur. The fraction of craze meetings resulting in intersection increases from 20% at ₁= ₂=3% to 55% at ₁= ₂=5%; intersections also occur preferentially in thin regions of primary crazes. The craze fibril structure in the intersection has a much lower fibril volume fraction, v _f, than either of the two crazes from which it formed. The fibril volume fraction in the intersection is approximately given by the product of the fibril volume fractions of the two crazes, in agreement with a prediction based on the surface drawing mechanism of craze thickening. At higher strain levels the v _fs of the intersections are lower, leading to higher fibril stresses and enhanced fibril fracture; an increasing fraction of intersections breaks down to form large voids at these higher strain levels. Fractography of macroscopic samples containing intersecting crazes demonstrates that voids formed at the intersections can act as nuclei for cracks causing premature fracture of the material.     

Heat-induced tenderisation of meat by endogenous carboxyl proteases

The rôle of carboxyl proteases in tenderising meat was investigated by injecting the inhibitors, pepstatin and EPNP, into pre-rigor muscle. The increase in shear force values induced by these inhibitors provided a minimum estimate of the extent to which endogenous carboxyl proteases normally tenderise meat at 60°C.Gel electrophoresis showed that connectin was hydrolysed to a greater extent than other muscle proteins at this temperature and that breakdown of connectin was inhibited by pepstatin and EPNP. Thus it is likely that, when intact, connectin may contribute to the strength of cooked meat.     

High-temperature and broadband immersion ultrasonic probes

Immersion ultrasonic probes for measurements and imaging at high temperature are presented. The probes consist of sol-gel-sprayed thick films as piezoelectric ultrasonic transducers (UTs) directly deposited onto steel buffer rods. They operate in pulse-echo mode at temperatures up to 500/spl deg/C. The operating ultrasonic frequency is between 5 MHz and 20 MHz, controlled by the film thickness. The ultrasonic thickness measurement of a steel plate with the probe fully immersed in molten zinc at 450/spl deg/C was demonstrated using ultrasonic plane waves. For imaging purposes, the probing end of the steel buffer rod was machined into a semispherical concave shape to form an ultrasonic lens and achieve high spatial resolution with focused ultrasound in liquids. Ultrasonic surface and subsurface imaging using a mechanical raster scan of the focused probe in silicone oil at 200/spl deg/C was also carried out. The importance of the signal-to-noise ratio (SNR) in the pulse-echo measurement is discussed.     

Risk Factors for Partner Violence Among a National Sample of Combat Veterans.

In this study, the authors identified potential risk factors for partner violence perpetration among a subsample (n=109) of men who participated in a national study of Vietnam veterans. Partner violent (PV) men with posttraumatic stress disorder (PTSD) were compared with PV men without PTSD and nonviolent men with PTSD on family-of-origin variables, psychiatric problems, relationship problems, and war-zone factors. PV men with PTSD were the highest of the 3 groups on every risk factor other than childhood abuse. Group contrasts and a classification tree analysis suggest some potential markers and mechanisms for the association between PTSD and partner violence among military veterans and highlight the need for theory development in this area of inquiry. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Monitoring of slow ground deformation by ERS radar interferometry on the Vauvert salt mine (France): Comparison with ground-based measurement

The differential SAR Interferometry (DInSAR) technique has been applied to a test site near Vauvert (France) to detect and monitor ground deformation. This site corresponds to the location of an industrial exploitation of underground salt using the solution mining technique. An area of subsidence has been observed using in situ measurements. Despite conditions unfavorable for InSAR because of the vegetal cover, we show that radar remote sensing observations provide valuable information which substantially improves our knowledge of the phenomenon. An adaptive phase filtering process has been used to improve the coherence level. In particular, our study shows that the geometry of the subsidence bowl is different to that previously assumed using ground-based techniques only. The size of the subsidence bowl (8 km) is larger than expected. This information will be useful for further modeling of the deformation and to improve the coverage of the in situ measurement networks. It also shows that radar interferometry can be used for the long-term monitoring of such sites and to predict potential environmental issues.     

Polycrystalline silicon-germanium films for integrated microsystems

Two approaches were demonstrated for fabricating microstructures after completion of CMOS circuits with aluminum metallization. The first approach employed n-type poly-Ge deposited at 400/spl deg/C as a structural material with an SiO/sub 2/ sacrificial layer and an HF release. The CMOS circuits were protected from the release etchant with an amorphous Si layer. Clamped-clamped lateral resonator test structures had quality factors in vacuum as high as /spl sim/30000. Following a 500/spl deg/C, 30 s RTA the poly-Ge stress was 200 MPa (tensile) and the resistivity was 5.3 m/spl Omega/-cm. In the second integration approach, p-type poly-Si/sub 0.35/Ge/sub 0.65/ deposited at 450/spl deg/C was the structural material with poly-Ge as the sacrificial material and H/sub 2/O/sub 2/ as the release etchant. The H/sub 2/O/sub 2/ did not significantly etch the p-type poly-SiGe structural layer and no protection of the underlying CMOS layers was needed. For the first time, the fabrication of LPCVD surface microstructures directly on top of standard electronics was demonstrated, providing dramatic reductions in both MEMS-CMOS interconnect parasitics and device area. A folded flexure lateral resonator had a quality factor in vacuum as high as /spl sim/15000. No stress or dopant-activation anneal was needed, since the in situ boron-doped poly-SiGe was found to have an as-deposited stress of only -10 MPa (compressive) and a resistivity of only 1.8 m/spl Omega/-cm.     

Mexitl: Multimedia in Executable Interval Temporal Logic

This paper explores a formalism for describing a wide class of multimedia document constraints, based on an interval temporal logic. We describe the requirements that arise from the multimedia documents application area, and we illustrate these requirements using several examples. Then we present the temporal logic formalism that we use. This logic extends existing interval temporal logic with a number of new features: actions, framing of actions, past operators, a projection-like operator called filter and a new handling of interval length. The notation is applied to the specification of the examples, and in particular a set of logical manipulations, providing feedback to an author, is presented. A model theory, logic and satisfaction relation are defined for the notation.