Discharge rate capabilities of alkaline AgCuO2 electrode

A series of AgCuO₂ samples are prepared and tested as alkaline cathode materials for primary batteries. AgCuO₂ discharges via four equivalent-charge reduction processes, the rate capabilities of which are determined. At ambient temperature AgCuO₂ displays superior rate capabilities for the two highest voltage processes. For all samples, the rate capability of the two lower voltage processes is always superior to those at higher voltage. This is due to the electrode intrinsically doping itself with elemental silver during discharge as part of the second reduction process. The electrode compares favourably with commercial electrolytic manganese dioxide but is prone to self-discharge, the kinetics of which are also discussed.     

On‐site investigations on concrete resistivity – a parameter of durability calculation of reinforced concrete structures

For determination the electrolytic resistivity of concrete, resistances of realistic designed probes are measured during a one and two year period, respectively. Measurements are made with a commercially available instrument normally used for measuring earth resistances. Comparison to other usually applied methods show not only that the used method GEOHM is qualified for measuring the electrolytic resistance of concrete but also that the magnitude of measured values is realistic. To obtain electrolytic resistivities from these measurements the individual cell constant for the investigated system was derived from experimental research. First results of the in‐situ stored specimens are presented, intended future activities are sketched.     

Four heads are better than one: Combining face composites yields improvements in face likeness.

Four participants constructed face composites, of familiar and unfamiliar targets, using Pro-Fit, with reference images present or from memory. The "mean" of all 4 composites, created by morphing (4-morph) was rated as a better likeness than individual composites on average and was as good as the best individual likeness. When participants attempted to identify targets from line-ups, 4-morphs again performed as well as the best individual composite. In a second experiment, participants familiar with target women attempted to identify composites, and the trend showed better recognition from multiple composites, whether combined or shown together. In a line-up task with unfamiliar participants, 4-morphs produced most correct choices and fewest false positives from target-absent or target-present arrays. These results have practical implications for the way evidence from different witnesses is used in police investigations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Urban qualities and residents’ strategies in compact global south cities: the case of Havana

Research and policy argue for more compact cities to respond to sustainable development challenges. However, what actually needs to be made more compact and how, is under examined, particularly in global South cities where north notions of urban qualities are adopted without being questioned. Informed by a qualitative study in informal and compact neighborhoods in Havana, this paper explores which qualities are important to deliver more just cities, and what strategies are developed by residents to strengthen beneficial qualities and address detrimental qualities in contexts of informal urbanization and compactness. It shows how the street, human capital, neighborhood, housing affordability, citizenship and vibrancy are significant compact city qualities neglected in the literature. Finally, the paper shows how diverse strategies are developed by residents to draw upon these qualities, such as self-help urbanism, learning and innovation, economic entrepreneurship, networks of solidarity, economies of reciprocity, local imaginaries and active citizenship.

     

Analysis of UK river restoration using broad‐scale data sets

This paper uses data from the UK River Restoration Centre's National River Restoration Inventory (NRRI) and the UK Environment Agency's River Habitat Survey (RHS) to analyse the relationship between restoration technique and the physical catchment context in which they have been implemented. Specifically we tested the relationship between categories of restoration technique and energy conditions, the relationship between restoration project and degree of channel modification, and whether the associations between restoration and physical catchment attributes have changed over time. Significant associations between categories of restoration technique and catchment variables were found, with direct morphological interventions needed in lower energy conditions; however, the analysis shows no change over time. This work shows that analysis of existing data sets can provide useful information to support the science and practice of river restoration and suggests that further analysis of existing ecological and geomorphological data sets provides an important learning opportunity to strengthen river restoration.     

Does waterborne citalopram affect the aggressive and sexual behaviour of rainbow trout and guppy?

Citalopram is one of several selective serotonin reuptake inhibitors (SSRIs) commonly found in treated sewage effluents. Accordingly, there are concerns about possible adverse effects of SSRIs on aquatic organisms, particularly behavioural effects similar to those associated with SSRI use in humans. Rainbow trout fry and adult male guppies were therefore exposed to waterborne citalopram, ranging from environmentally relevant to high concentrations (1, 10, 100 μg/L) for 3-7 days. Under these experimental conditions citalopram does not appear to cause significant effects on aggression in rainbow trout fry or on sexual behaviour in male guppies. This may be explained by a relatively low uptake of citalopram from water to fish.     

Degradation of organic solar cells due to air exposure

We present a study of dark air-exposure degradation of organic solar cells based on photoactive blends of the conjugated polymer, poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene] (MDMO-PPV) with [6,6]-phenyl C₆₁-butyric acid methyl ester (PCBM). Photovoltaic devices were fabricated on indium tin oxide (ITO) glass with or without a layer of poly (3,4-ethylenedioxythiophene):poly(4-styrene sulfonate) (PEDOT:PSS), and were studied without encapsulation. Photovoltaic performance characteristics were measured as a function of time for different ambient conditions (under white light irradiation and in the dark, and under air, dry oxygen and humid nitrogen atmospheres). It was found that a key cause of degradation under air exposure is light independent and results from water adsorption by the hygroscopic PEDOT:PSS layer. Measurements of the charge mobility and hole injection after air exposure showed that the degradation increases the resistance of the PEDOT:PSS/blend layer interface.     

Non‐Geminate Recombination as the Primary Determinant of Open‐Circuit Voltage in Polythiophene:Fullerene Blend Solar Cells: an Analysis of the Influence of Device Processing Conditions

The physical origin of the open‐circuit voltage in bulk heterojunction solar cells is still not well understood. While significant evidence exists to indicate that the open‐circuit voltage is limited by the molecular orbital energies of the heterojunction components, it is clear that this picture is not sufficient to explain the significant variations which often occur between cells fabricated from the same heterojunction components. We present here an analysis of the variation in open‐circuit voltage between 0.4–0.65 V observed for a range of P3HT/PCBM solar cells where device deposition conditions, electrode structure, active‐layer thickness and device polarity are varied. The analysis quantifies non‐geminate recombination losses of dissociated carriers in these cells, measured under device operating conditions. It is found that at open‐circuit, losses due to non‐geminate recombination are sufficiently large that other loss pathways may effectively be neglected. Variations in open‐circuit voltage between different devices are shown to arise from differences in the rate coefficient for non‐geminate recombination, and from differences in the charge densities in the photoactive layer of the device. The origin of these differences is discussed, particularly with regard to variations in film microstructure. By separately quantifying these differences in rate coefficient and charge density, and by application of a simple physical model based upon the assumption that open‐circuit is reached when the flux of charge photogeneration is matched by the flux of non‐geminate recombination, we are able to calculate correctly the open‐circuit voltage for all the cells studied to within an accuracy of ±5 mV.     

Paper-based microfluidic surface acoustic wave sample delivery and ionization source for rapid and sensitive ambient mass spectrometry

A surface acoustic wave-based sample delivery and ionization method that requires minimal to no sample pretreatment and that can operate under ambient conditions is described. This miniaturized technology enables real-time, rapid, and high-throughput analysis of trace compounds in complex mixtures, especially high ionic strength and viscous samples that can be challenging for conventional ionization techniques such as electrospray ionization. This technique takes advantage of high order surface acoustic wave (SAW) vibrations that both manipulate small volumes of liquid mixtures containing trace analyte compounds and seamlessly transfers analytes from the liquid sample into gas phase ions for mass spectrometry (MS) analysis. Drugs in human whole blood and plasma and heavy metals in tap water have been successfully detected at nanomolar concentrations by coupling a SAW atomization and ionization device with an inexpensive, paper-based sample delivery system and mass spectrometer. The miniaturized SAW ionization unit requires only a modest operating power of 3 to 4 W and, therefore, provides a viable and efficient ionization platform for the real-time analysis of a wide range of compounds.     

Silver bullet or trojan horse? The effects of inclusionary zoning on local housing markets in the United States

Many local governments are adopting inclusionary zoning (IZ) as a means of producing affordable housing without direct public subsidies. In this paper, panel data on IZ in the San Francisco metropolitan area and suburban Boston are used to analyse how much affordable housing the programmes produce and how IZ affects the prices and production of market-rate housing. The amount of affordable housing produced under IZ has been modest and depends primarily on how long IZ has been in place. Results from suburban Boston suggest that IZ has contributed to increased housing prices and lower rates of production during periods of regional house price appreciation. In the San Francisco area, IZ also appears to increase housing prices in times of regional price appreciation, but to decrease prices during cooler regional markets. There is no evidence of a statistically significant effect of IZ on new housing development in the Bay Area.