I-WAP: an intelligent WAP site management system

The popularity regarding wireless communications is such that more and more WAP sites have been developed with wireless markup language (WML). Meanwhile, to translate hypertext markup language (HTML) pages into proper WML ones becomes imperative since it is difficult for WAP users to read most contents designed for PC users via their mobile phone screens. However, for those sites that have been maintained with hypertext markup language (HTML), considerable time and manpower costs will be incurred to rebuild them with WML. In this paper, we propose an intelligent WAP site management system to cope with these problems. With the help of the intelligent management system, the original contents of HTML Web sites can be automatically translated to proper WAP content in an efficient way. As a consequence, the costs associated with maintaining WAP sites could be significantly reduced. The management system also allows the system manager to define the relevance of numerals and keywords for removing unimportant or meaningless contents. The original contents will be reduced and reorganized to fit the size of mobile phone screens, thus reducing the communication cost and enhancing readability. Numerical results gained through various experiments have evinced the effective performance of the WAP management system.     

Development of a thermal hydraulic analysis code for gas-cooled reactors with annular fuels

Gas-cooled reactors have been highlighted as a promising option for next generation reactor technology. A thermal hydraulic analysis code for gas-cooled reactors has been developed with a heat transfer model of a block element, which is solved implicitly with the helium energy equation. Validation was carried out through comparison with both experimental and analytical results. A computation module for annular fuel rods has been coupled to the code for comparative analyses of an annular fuel-based block element. At normal operation, the annular fuel shows 80 °C lower peak temperature than the solid fuel for the same power in Japan's high temperature engineering test reactor (HTTR), even though the pressure drop is higher in the annular fuel.     

Decision-directed maximum-likelihood estimation of OFDM framesynchronisation offset

The authors propose a method to estimate the synchronisation offset for orthogonal frequency division multiplexing (OFDM) frame alignment without resort to pilot tones. A decision-directed maximum-likelihood estimation of frame synchronisation offset is derived, and the performance of the proposed scheme is confirmed by computer simulation for QAM systems     

Abdominal vagotomy alters the structure of the ingestive behavior of rats ingesting liquid diets.

A microstructural analysis of the licking behavior of the rat was used to investigate the effects of total abdominal vagotomy on ingestive behavior. Vagotomy decreased the meal size of milk and 3 concentrations of sucrose. The decrease was due to an increase in the decline in the rate of licking during the meal, suggesting that negative feedback from the gastrointestinal tract was enhanced by vagotomy, perhaps because of accelerated clearance of fluid from the stomach to the intestine. No evidence was found for motor dysfunction of licking or alterations in gustatory sensitivity to the test solution. The results suggest that vagotomy enhanced the strength of an extravagally mediated negative feedback signal from the intestine and that the vagus nerve normally prevents this from occurring by regulating gastric clearance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Classification of pixels in a noisy grayscale image of polar ice

Often, in synthetic aperture radar (SAR) images of polar ice, one encounters shadow-like features across the images. Such features make it difficult to classify pixels into ice and water. Accordingly, it becomes a challenge to determine the true size and boundaries of ice floes in an SAR image of polar ice. We develop a simple statistical procedure which classifies pixels of an image by eliminating the effects of shadow-like features. Methodology developed in this paper is illustrated using some noisy SAR images of ice floes in the Arctic sea.     

Physical model of drain conductance, gd, degradation ofNMOSFET's due to interface state generation by hot carrierinjection

Degradation of analog device parameters such as drain conductance, g_d, due to hot carrier injection has been modeled for NMOSFET's. In this modeling, mobility reduction caused by interface state generation by hot carrier injection and the gradual channel approximation were employed. It has been found that g_d degradation can be calculated from linear region transconductance, g_m, degradation which is usually monitored for hot carrier degradation of MOSFET's. The values of g_d degradation calculated from g_m degradation fit well to the measured values of g_d degradation The dependence of the g_d degradation lifetime on L_eff has been also studied, this model also provides an explanation of the dependence on L_eff. The model is then useful for lifetime predictions of analog circuits in which g_d degradation is usually more important than g_m degradation     

Fabrication of low-loss IR-transmitting Ge30As10Se30Te30 glass fibers

Improved purification and processing techniques have been utilized to fabricate Ge₃₀As₁₀Se₃₀Te₃₀ glass fibers with a minimum loss of O.11 dB/m at 6.6 μm. This is the lowest loss reported for any telluride glass fiber in the infrared region. Furthermore, the fibers exhibit less than 1 dB/m loss between 5.25 and 9.5 μm     

Effect of lanthanide ions on the phase behavior of dipalmitoylphosphatidylcholine multilamellar liposomes

The effect of lanthanide ions (Ln3+) and their coordination compounds of diethylenetriamine pentaacetic acid (DTPA) on the phase behavior of dipalmitoylphosphatidylcholine (DPPC) multi-lamellar liposomes has been studied by differential scanning calorimetry (DSC), Raman spectroscopy, and freeze-fracture electron microscopic techniques. The displacement of Ca2+ binding on DPPC liposomes by lanthanide ions was also studied. The results show that the binding degree of four kinds of chloride salts with DPPC liposomes is: YbCl3 > GdCl3 > LaCl3 > CaCl2. Lanthanide ions increase the phase transition temperature of DPPC liposomes and decrease the membrane fluidity. Freeze-fracture electron microscopic results show that La3+ enhances the order of DPPC membrane. The effect of coordination compounds of lanthanides with DTPA on the phase behavior of DPPC liposomes is smaller than that of their chlorides. La3+, Gd3+, and Yb3+, can displace Ca2+ binding on DPPC liposomes, but there coordination compounds of DTPA can hardly displace Ca2+. Raman spectroscopic results show that a very slight effect in lateral packing order of DPPC liposomes was observed at various concentrations of lanthanides.     

A new MMIC broadside coupler using an array of air-bridges for directivity enhancement

A new quadrature broadside coupler is proposed, which employs an array of air-bridges to enhance directivity via its phase-equalization effect on the c-mode and /spl pi/-modes. The realization of air-bridges follows a standard MMIC fabrication process. An experimental chip fabricated on the 75-/spl mu/m GaAs substrate verifies the air-bridge effect and shows wideband characteristics of the coupling of 3.2/spl plusmn/0.4 dB, the insertion loss of 3.9/spl plusmn/0.4 dB, the output phase deviation from quadrature less than 6/spl deg/, and the isolation greater than 18 dB from 20 to 40 GHz.     

Test data compression and test time reduction using an embedded microprocessor

Systems-on-a-chip (SOCs) with many complex intellectual property cores require a large volume of data for manufacturing test. The computing power of the embedded processor in a SOC can be used to test the cores within the chip boundary, reducing the test time and memory requirements. This paper discusses techniques that use the computing power of the embedded processor in a more sophisticated way. The processor can generate and reuse random numbers to construct test patterns and selectively apply only those patterns that contribute to the fault coverage, significantly reducing the pattern generation time, the total number of test applications and, hence, the test time. It can also apply deterministic test patterns that have been compressed using the characteristics of the random patterns as well as those of the deterministic patterns themselves, which leads to high compression of test data. We compare three fast run-length coding schemes which are easily implemented and effective for test-data compression. We also demonstrate the effectiveness of the proposed approach by applying it to some benchmark circuits and by comparing it with other available techniques.