Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Tocopherol contents of some Turkish wine by-products

The aim of this study was to determine the tocopherol contents of wine by-products including grape seed, pomace (seed, skin and stem) and bagasse (skin and stem) by using two different extraction methods in order to evaluate the possibilities of them as natural non-polar antioxidants. Cold extraction appeared to give more tocopherol contents in seeds than hot extraction. But hot extraction was found more suitable for pomace and bagasse. α-Tocopherol was the most abundant tocopherol in the grape seed, pomace and bagasse. Although γ- and δ-tocopherols were found in the samples with low concentrations, β-tocopherol was not detected in the samples. Kalecik karası had the highest α and total tocopherol compared to the other cultivars. On the other hand, hot extracted bagasse in all cultivars gave the highest tocopherol contents. As a conclusion, wine by-products, a large scale wastes, can be evaluated both to get natural tocopherol source and to obtain economical gain.     

In-Situ and Real-Time Investigation of Columnar-to-Equiaxed Transition in Metallic Alloy

In this article, we present a review of observations during Al-3.5 wt pct Ni alloy solidi.cation experiments performed at the European Synchrotron Radiation Facility (ESRF) in Grenoble. These experiments provide direct access to dynamical phenomena during columnar growth (initial transient and breakdown of a planar solid-liquid interface), and for the first time to the transition from columnar-to-equiaxed microstructure (nucleation ahead of a columnar front and blocking of a columnar front by an equiaxed microstructure) and fully equiaxed growth (propagation of an effective front). Based on these experimental observations, critical parameters such as columnar growth velocity variation during the transition or equiaxed-grain diameter are measured and discussed. This article is based on a presentation made in the symposium entitled “Solidi.cation Modeling and Microstructure Formation: In Honor of Prof. John Hunt,” which occurred March 13–15, 2006, during the TMS Spring Meeting in San Antonio, Texas, under the auspices of the TMS Materials Processing and Manufacturing Division, Solidification Committee.     

Tensile,creep, and low-cycle fatigue behavior of a cast γ-TiAl-based alloy for gas turbine applications

The influence of chemical composition on the microstructure of the γ-titanium aluminide alloy Ti-48Al-2W-0.5Si (at. pct) and the accompanying tensile, low-cycle fatigue, and creep properties has been evaluated. The study showed that small variations in chemical composition and casting procedures resulted in considerable variations in the microstructure, yielding vastly different mechanical properties. Low contents of aluminum and tungsten led to a coarse-grained lamellar (γ/α ₂) microstructure with high creep resistance. A composition close to the nominal one produced a duplex (γ+γ/α ₂) structure with favorable strength, ductility, and low-cycle fatigue properties. By controlling the solidification and cooling rates at casting, a pseudoduplex (PS-DP) microstructure with a unique combination of high strength and high fatigue and creep resistance can be obtained. These unique properties can be explained by the diffuse boundaries between the relatively small γ grains and the neighboring lamellar colonies, combined with semicoherent interfaces between the γ and α ₂ phases. At tensile and low-cycle fatigue loading, these boundaries act like high-angle boundaries, producing a virtually fine-grained material promoting strength, whereas at creep loading, grain-boundary sliding is hindered in the semicoherent interfaces leading to high creep resistance.     

Crystallographic electron microscopy

We present a family of techniques for the transmission electron microscope that generate surface zone-axis patterns. These patterns display the variation of the diffracted-beam intensity as a function of the angle of the incident electrons. The conditions of the experiments are those of reflection high-energy electron diffraction at near grazing incidence. The techniques are: surface convergent-beam diffraction, a surface analogue of the Tanaka method and a modified double-rocking scheme. Experimental results are presented for diffraction from surfaces of MgO and MoS₂. We anticipate that surface zone-axis patterns (surface ZAPs) will become established as an important tool for surface characterization, especially when used in conjunction with high-resolution surface imaging and surface energy loss spectroscopy; surface ZAPs may be expected to play, in surface analysis, a role analogous to that played by convergent-beam diffraction in normal transmission electron microscopy.     

Putting it all together – Formal verification of the VAMP

In the verified architecture microprocessor (VAMP) project we have designed, functionally verified, and synthesized a processor with full DLX instruction set, delayed branch, Tomasulo scheduler, maskable nested precise interrupts, pipelined fully IEEE compatible dual precision floating point unit with variable latency, and separate instruction and data caches. The verification has been carried out in the theorem proving system PVS. The processor has been implemented on a Xilinx FPGA. A shorter version of this article with the title “Instantiating uninterpreted functional units and memory system: functional verification of the VAMP” appeared in [8]. The work reported here was done while all the authors were with Saarland University.