Biotite-brine interactions under acidic hydrothermal conditions: fibrous illite, goethite, and kaolinite formation and biotite surface cracking

To ensure safe and efficient geologic CO(2) sequestration (GCS), it is crucial to have a better understanding of CO(2)-brine-rock interactions under GCS conditions. In this work, using biotite (K(Mg,Fe)(3)AlSi(3)O(10)(OH,F)(2)) as a model clay mineral, brine-biotite interactions were studied under conditions relevant to GCS sites (95 °C, 102 atm CO(2), and 1 M NaCl solution). After reaction for 3-17 h, fast growth of fibrous illite on flat basal planes of biotite was observed. After 22-70 h reaction, the biotite basal surface cracked, resulting in illite detaching from the surface. Later on (96-120 h), the cracked surface layer was released into solution, thus the inner layer was exposed as a renewed flat basal surface. The cracking and detachment of the biotite surface layer increased the surface area in contact with solution and accelerated biotite dissolution. On biotite edge surfaces, Al-substituted goethite and kaolinite precipitated. In control experiments with water under the same temperature and pressure, neither macroscopic fibrous illite nor cracks were observed. This work provides unique information on biotite-brine interaction under acidic hydrothermal conditions.     

Triggering the volume phase transition of core-shell Au nanorod-microgel nanocomposites with light

We have coated gold nanorods (NRs) with thermoresponsive microgel shells based on poly(N-isopropylacrylamide) (pNIPAM). We demonstrate by simultaneous laser-heating and optical extinction measurements that the Au NR cores can be simultaneously used as fast optothermal manipulators (switchers) and sensitive optical reporters of the microgel state in a fully externally controlled and reversible manner. We support our results with optical modeling based on the boundary element method and 3D numerical analysis on the temperature distribution. Briefly, we show that due to the sharp increase in refractive index resulting from the optothermally triggered microgel collapse, the longitudinal plasmon band of the coated Au NRs is significantly red-shifted. The optothermal control over the pNIPAM shell, and thereby over the optical response of the nanocomposite, is fully reversible and can be simply controlled by switching on and off a NIR heating laser. In contrast to bulk solution heating, we demonstrate that light-triggering does not compromise colloidal stability, which is of primary importance for the ultimate utilization of these types of nanocomposites as remotely controlled optomechanical actuators, for applications spanning from drug delivery to photonic crystals and nanoscale motion.     

Participatory ergonomics: development of an employee assessment questionnaire

Despite being essential to the success of participatory ergonomics (PEs) programs, there are currently no known quantitative measures that capture the employees’ perspective of PE program effectiveness. The present study addresses this need through the development of the Employee Perceptions of Participatory Ergonomics Questionnaire (EPPEQ). The questionnaire is designed to assess five key components that are based on a review of the available literature: Employee Involvement, Knowledge Base, Managerial Support, Employee Support, and Strain related to ergonomic changes. In Phase 1, a sample of employees and ergonomists working at a manufacturing plant was used to develop and test an initial set of items. In Phase 2, data was collected from a nation-wide sample of employees representing a wide range of jobs and organizations to cross-validate the results from Phase 1. Phase 2 results indicate that the five EPPEQ subscales demonstrate sound convergent validity and are also correlated with traditional indicators of PE program success. Implications and uses of the EPPEQ are discussed.     

A hazard perception test for novice drivers

We developed a hazard perception test, modeled on that used currently in several Australian states, that presents short video scenes to observers and requires them to indicate the presence of a traffic conflict that would lead to a collision between the “camera” vehicle and another road user. After eliminating those scenes that were problematic (e.g., many observers did not recognize the hazard), we predicted driver group (novice vs. experienced drivers of similar age) on the basis of individual differences in reaction time, miss rate and false alarm rate. Novices were significantly slower in responding to hazards, even after controlling for age and simple reaction time. After selecting those scenes with the larger group differences, an 18-scene test that would be useful for mass testing exhibited even larger experience effects. There was good reliability in the resulting scale. Results suggest that this brief test of hazard perception can discriminate groups that differ in driving experience. Implications for driver licensing, evaluation and training are discussed.     

Coating effects on mid-infrared reflection spectra of fabrics

Polymer films of varying thicknesses were deposited onto cotton and polyester fabric samples by dip-coating from solution. Scanning electron microscopy (SEM) images of the coated fabric samples were used to evaluate the quality of the polymer coating. The samples were analyzed by infrared diffuse reflection spectroscopy to determine the relationship between film thickness and the effect of the coating on the spectroscopy of the two fabrics. Effects observed in four limiting cases are examined: (Case I) weak coating absorption on a fabric with weak absorption at the same frequency; (Case II) strong coating absorption in a spectral region of weak fabric absorption; (Case III) weak coating absorption in a spectral region of strong fabric absorption; and (Case IV) strong coating absorption in a spectral region of strong fabric absorption. In the first case, effects were dominated by reduced scattering as the coating is added. In the second case, the strong coating absorption that was observed at low coverages plateaus at higher coverage due to depth of penetration effects. In the third and fourth cases, reduced Fresnel diffuse reflection is measured as the coating is added, consistent with the reduction of scattering observed in the first case.     

Detection of the human specific Bacteroides genetic marker provides evidence of widespread sewage contamination of stormwater in the urban environment

Human sewage contamination of surface waters is a major human health concern. We found urban stormwater systems that collect and convey runoff from impervious surfaces act as a conduit for sewage originating from breeches in sanitary sewer infrastructure. A total of 828 samples at 45 stormwater outfalls were collected over a four-year period and assessed by culture based methods, PCR, and quantitative PCR (qPCR) to test for traditional and alternative indicators of fecal pollution. All outfalls had the HF183 (human) Bacteroides genetic marker detected in at least one sample, suggesting sewage contamination is nearly ubiquitous in the urban environment. However, most outfalls were intermittently positive, ranging from detection in 11%-100% of the samples. Positive results did not correlate with seasonality, rainfall amounts, or days since previous rainfall. Approximately two-thirds of the outfalls had high (>5000 copy number, i.e. CN, per 100 ml) or moderate levels (1000-5000 CN per 100 ml) of the human Bacteroides genetic marker. Escherichia coli (E. coli) and enterococci levels did not correlate to human Bacteroides. A total of 66% of all outfall samples had standard fecal indicator levels above 10,000 CFU per 100 ml. A tiered assessment using this benchmark to identify high priority sites would have failed to flag 35% of the samples that had evidence of sewage contamination. In addition, high fecal indicators would have flagged 33% of samples as priority that had low or no evidence of sewage. Enteric virus levels in one outfall with high levels of the human Bacteroides genetic marker were similar to untreated wastewater, which illustrates stormwater can serve as a pathway for pathogen contamination. The major source of fecal pollution at four of five river sites that receive stormwater discharge appeared to be from sewage sources rather than non-human sources based on the ratios of human Bacteroides to total Bacteroides spp. This study shows the feasibility and benefits of employing molecular methods to test for alternative indicators of fecal pollution to identify sewage sources and potential health risks and for prioritization of remediation efforts.     

Bioaccumulation of As, Cd, Cr, Hg(II), and MeHg in killifish (Fundulus heteroclitus) from amphipod and worm prey

Elevated metal levels in fish are a concern for the fish themselves, their predators, and possibly humans who consume contaminated seafood. Metal bioaccumulation models often rely on assimilation efficiencies (AEs) of ingested metals and loss rate constants after dietary exposure (k_efs). These models can be used to better understand processes regulating metal accumulation and can be used to make site-specific predictions of metal concentrations in animal tissues. Fish often consume a varied diet, and prey choice can influence these two parameters. We investigated the trophic transfer of As, Cd, Cr, Hg(II), and methylmercury (MeHg) from a benthic amphipod (Leptocheirus plumulosus) and an oligochaete (Lumbriculus variegatus) to killifish (Fundulus heteroclitus) using gamma-emitting radioisotopes. Except for MeHg, AEs varied between prey type. AEs were highest for MeHg (92%) and lowest for Cd (2.9-4.5%) and Cr (0.2-4%). Hg(II) showed the largest AE difference between prey type (14% amphipods, 24% worms). For Cd and Hg(II) k_efs were higher after consuming amphipods than consuming worms. Tissue distribution data shows that Cd and Hg(II) were mainly associated with the intestine, whereas As and MeHg were transported throughout the body. Calculated trophic transfer factors (TTFs) suggest that MeHg is likely to biomagnify at this trophic step at all ingestion rates, whereas As, Cd, Cr, and Hg(II) will not. Data collected in this study and others indicate that using one prey item to calculate AE and k_ef could lead to an over- or underestimation of these parameters.     

Understanding the emotional aspects of escalation of commitment: The role of negative affect.

Despite the importance of understanding the emotional aspects of organizational decision making, prior research has paid scant attention to the role of emotion in escalation of commitment. This article attempts to fill this gap by examining the relationship between negative affect and escalation of commitment. Results showed that regardless of whether negative affect was measured as a dispositional trait (Neuroticism) in Studies 1 and 2 or as a transient mood state in Study 3, it was negatively correlated with escalation tendency when one was personally responsible for a prior decision. This pattern of results is consistent with the predictions derived from the coping perspective, suggesting that people seek to escape from the unpleasant emotions that are associated with escalation situations. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Wilma E. Hirst (1914-2005).

This is an obituary for Wilma Elizabeth Hirst. Hirst was a pioneer in the history of school psychology who came from a background in teaching and educational psychology, worked her way through graduate school, balanced home life and career, and forged a distinguished career in teaching, psychological service, and school administration. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of molecular weight on strain‐gradient yielding in polystyrene

Experimental observations have indicated that the presence of strain gradients has an influence on the inelastic behavior of polymers as well as in other materials such as ceramics and metals. The present study has experimentally quantified length‐scale effects in inelastic deformations of the polymer material polystyrene (PS) with respect to the molecular length. The experimental technique that has been used is nano‐indentation to various depths with a Berkovich indenter. The hardness has been calculated with the method by Oliver and Pharr, and also by direct measurements of the area from atomic force microscopy. The experiments showed that the length‐scale effects in inelastic deformations exist in polystyrene at ambient conditions. The direct method gave a smaller hardness than the Oliver‐Pharr method. It was also shown that the length‐scale parameter according to Nix and Gao increases with increasing molecular weight. For high molecular weights above a critical value of entanglement, there was no pertinent increase in the length‐scale parameter. The length‐scale parameter for strain‐gradient plasticity has a size of around 0.1 μm for polystyrene. Polym. Eng. Sci. 44:1987–1997, 2004. © 2004 Society of Plastics Engineers.