Fast mode decision algorithm for H.264 inter-prediction

A fast mode decision algorithm for H.264/AVC inter-prediction to reduce computational complexity of the H.264 encoder is presented. Experimental results show that the algorithm can save the entire encoding time by 77% on average while introducing only negligible loss in PSNR value and small increment of bit rate.     

Signaling and Control Procedures Using Generalized MPLS Protocol for IP over an Optical Network

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP‐centric signaling and control architecture based on the generalized multi‐protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross‐connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS‐based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user‐network interface and network‐network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to GMPLS signaling.     

Broadband access using subcarrier multiplexing and asymmetric digital subscriber lines

A broadband access system using subcarrier multiplexing on optical fibre and asymmetric digital subscriber lines (ADSL) or very high‐speed digital subscriber lines (VDSL) on unshielded twisted‐pair is proposed to provide broadband access. In this hybrid‐fibre/twisted‐pair (HFTP) system, the digital multiplexing/demultiplexing process is moved back to the central office by using subcarrier multiplexing for fibre transmission. Instead of installing in remote node, ADSL/VDSL transceivers are installed at the central office to greatly reduce the remote node complexity. The local node simply down‐converts the subcarrier multiplexed ADSL/VDSL signal to the baseband, suitable to send directly into the twisted‐pair. The reduction of complexity could result in a lower initial installation cost, especially for a low service penetration rate. Copyright © 2000 John Wiley & Sons, Ltd.     

Inverted Staggered Poly-Si Thin-Film Transistor With Planarized SOG Gate Insulator

In this letter, we have studied the inverted staggered thin-film transistor (TFT) using a spin-on-glass (SOG) gate insulator and a low-temperature polycrystalline silicon (poly-Si) by Ni-mediated crystallization of amorphous silicon. The p-channel poly-Si TFT exhibited a field-effect mobility of 48.2 cm²/V ldr s, a threshold voltage of -4.2 V, a gate-voltage swing of 1.2 V/dec, and a minimum off-current of < 4 times 10^-13A/ mum at V_ds = -0.1 V. Therefore, the gate planarization technology by SOG can be applicable to low-cost large-area poly-Si active-matrix displays.     

Thermal buffer materials for enhancement of device performance of organic light emitting diodes fabricated by laser imaging process

Laser Induced Thermal Imaging (LITI) is a laser addressed thermal patterning technology with unique advantages such as an excellent uniformity of transfer film thickness, a capability of multilayer stack transfer and a possibility to fabricate high resolution as well as large-area display. Nevertheless, it has been an obstacle to use such a laser imaging process as a commercial technology so far because of serious deterioration of the device performances plausibly due to a re-orientation of the molecular stacking especially in the emitting layer during thermal transfer process. To improve device performances, we devised a new concept to suppress the thermal degradation during such kind of thermal imaging process by using a high molecular weight small molecular species with large steric hindrance as well as high thermostability as a thermal buffer layer to realize highly efficient LITI devices. As a result, we obtained very high relative efficiency (by EQE) up to 91.5% at 1000 cd/m² from the LITI devices when we utilize 10-(naphthalene-2-yl)-3-(phenanthren-9-yl)spiro[benzo[ij]tetraphene-7,9′-fluorene] as a thermal buffer material.     

Phase-matched four-wave mixing between pumps and signals in a copumped Raman amplifier

We observe four-wave mixing (FWM) between copropagating pumps and signals in a Raman amplifier when the zero-dispersion wavelength of the transmission fiber lies symmetrically between the pump and the signal wavelengths. The resultant FWM products, which grow as they experience Raman gain along the fiber, can degrade the signal's optical signal-to-noise ratio by as much as 10 dB for a Raman ON-OFF gain of 15 dB.     

A Fast Intra Skip Detection Algorithm for H.264/AVC Video Encoding

A fast intra skip detection algorithm based on the rate‐distortion (RD) cost for an inter frame (P‐slices) is proposed for H.264/AVC video encoding. In the H.264/AVC coding standard, a robust rate‐distortion optimization technique is used to select the best coding mode and reference frame for each macroblock (MB). There are three types of intra predictions according to profiles. These are 16×16 and 4×4 intra predictions for luminance and an 8×8 intra prediction for chroma. For the high profile, an 8×8 intra prediction has been added for luminance. The 4×4 prediction mode has 9 prediction directions with 4 directions for 16×16 and 8×8 luma, and 8×8 chrominance. In addition to the inter mode search procedure, an intra mode search causes a significant increase in the complexity and computational load for an inter frame. To reduce the computational load of the intra mode search at the inter frame, the RD costs of the neighborhood MBs for the current MB are used and we propose an adaptive thresholding scheme for the intra skip extraction. We verified the performance of the proposed scheme through comparative analysis of experimental results using joint model reference software. The overall encoding time was reduced up to 32% for the IPPP sequence type and 35% for the IBBPBBP sequence type.     

Fiber-optic sensor array based on Sagnac interferometer with stablephase bias

We propose and experimentally demonstrate a novel fiber sensor array based on a Sagnac interferometer with very simple electronic signal processing. A stable quadrature phase bias was obtained using a phase modulator, and the polarization-induced signal fading was suppressed by using a depolarizer and a broad-band source. A phase sensitivity of about 4.0 μrad_rms/√Hz at 5 kHz was obtained using a two-sensor array     

The future of wires

Concern about the performance of wires wires in scaled technologies has led to research exploring other communication methods. This paper examines wire and gate delays as technologies migrate from 0.18-μm to 0.035-μm feature sizes to better understand the magnitude of the the wiring problem. Wires that shorten in length as technologies scale have delays that either track gate delays or grow slowly relative to gate delays. This result is good news since these “local” wires dominate chip wiring. Despite this scaling of local wire performance, computer-aided design (CAD) tools must still become move sophisticated in dealing with these wires. Under scaling, the total number of wires grows exponentially, so CAD tools will need to handle an ever-growing percentage of all the wires in order to keep designer workloads constant. Global wires present a more serious problem to designers. These are wires that do not scale in length since they communicate signals across the chip. The delay of these wives will remain constant if repeaters are used meaning that relative to gate delays, their delays scale upwards. These increased delays for global communication will drive architectures toward modular designs with explicit global latency mechanisms