含砷氰化尾矿回填利用污染控制技术试验研究

针对某黄金生产企业含砷氰化尾矿污染特征,开展了搅拌洗涤法、臭氧氧化法、酸化溶砷法、铁盐固砷法等多种无害化方法联合处理试验研究,旨在将该含砷氰化尾矿处理至满足氰渣规范回填利用污染控制要求。结果表明：该含砷氰化尾矿回填利用污染控制技术工艺为压滤调浆搅拌洗涤+臭氧氧化+酸化溶砷+铁盐固砷,最佳参数为原矿浆压滤后加水调浆,矿浆浓度40%,臭氧投加量0.66 g/L,酸化溶砷pH值3、曝气量0.1 m³/h、反应时间2 h,铁盐固砷七水合硫酸亚铁投加量20.0 g/L、反应时间1 h。研究结果为该黄金生产企业含砷氰化尾矿回填利用提供了技术支撑。     

Multidisciplinary optimization of gas-quenching process

Distortion as a result of the quenching process is predominantly due to the thermal gradient and phase transformations within the component. Compared with traditional liquid quenching, the thermal boundary conditions during gas quenching are relatively simple to control. By adjusting the gas-quenching furnace pressure, the flow speed, or the spray nozzle configuration, the heat-transfer coefficients can be designed in terms of both the component geometry and the quenching time. The purpose of this research is to apply the optimization methodology to design the gas-quenching process. The design objective is to minimize the distortion caused by quenching. Constraints on the average surface hardness, and its distribution and residual stress are imposed. The heat-transfer coefficients are used as design variables. DEFORM-HT is used to predict material response during quenching. The response surface method is used to obtain the analytical models of the objective function and constraints in terms of the design variables. Once the response surfaces of the objective and constraints are obtained, they are used to search for the optimum heat-transfer coefficients. This process is then used instead of the finite-element analysis. A one-gear blank case study is used to demonstrate the optimization scheme.     

Synergistic inhibition between o-phenanthroline and chloride ion for steel corrosion in sulphuric acid

The corrosion inhibition of cold rolled steel in 0.5 M sulphuric acid in the presence of o-phenanthroline and sodium chloride (NaCl) has been investigated by using weight loss and electrochemical techniques. The experimental data suggest that the inhibition efficiency increases with increasing NaCl concentration in the presence of 0.0002 M o-phenanthroline, but decreases with increasing temperature. A synergistic effect is observed when o-phenanthroline and chloride ions are used together to prevent cold rolled steel corrosion in 0.5 M sulphuric acid. The polarization curves showed that the complex of o-phenanthroline and NaCl acts as a mixed type inhibitor. The experimental results suggested that the presence of chloride ions in the solution stabilized the adsorption of o-phenanthroline molecules on the metal surface and improved the inhibition efficiency of o-phenanthroline. The adsorption of the complex accords with the Langmuir adsorption isotherm. Some thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy have been calculated by employing thermodynamic equations. Kinetic parameters such as apparent activation energy and pre-exponential factor have been calculated and discussed.     

NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.     

DECOMPOSITION AND PRECIPITATION OF CARBIDES IN HOT-ROLLED Si-Fe SHEETS

在高温金相显微镜下,直接观察碳化物在热轧硅钢中的分解与析出过程。指出冷却速度对碳化物析出形态有很大影响。用差热分析确定了碳化物的分解与析出温度。所得结果为改进热轧硅钢生产工艺提供了重要的依据。     

免疫遗传算法在烧结矿配料优化中的应用

运用免疫遗传算法和MATLAB语言 ,编制了钢铁烧结矿配料优化计算仿真程序 ,计算机仿真结果表明符合实际生产工艺要求 ,可直接应用于生产 ,提高各种烧结矿的综合利用率 ,降低成本 1 0 32 %。从而证明了免疫遗传算法是一种切实有效的优化方法 ,该算法为钢铁烧结矿配料问题的优化求解提供了新的思路和方法。     

Analysis of the central cavity of axisymmetric forward extrusion by the upper bound approach

In this paper, the use of a kinematically admissible velocity field to predict the presence of a central cavity in the final stage of axisymmetric forward extrusion is advanced, in accordance with the results of Moire experiments. On the basis of the velocity field, the critical condition for central cavity formation is obtained by the upper bound approach. Furthermore, the quantitative relationships between central cavity formation and process parameters (reduction in area, frictional factors on the ram and chamber wall, relative residual thickness of the of the billet) are studied. The results show that (1) the critical relative residual thickness of the billet used for the central cavity formation is affected primarily by the reduction in area and the frictional factors on the ram, and slightly by the frictional factor on the chamber wall; (2) the relative dimensions of the central cavity increase with a decrease in the relative residual thickness of the billet; (3) the growth rate of the central cavity decreases with an increase in the frictional factors on the ram, but is affected by the frictional factors on the chamber wall only slightly. Good correlation is found between the analytical and experimental results.     

LD7铝合金时效工艺的研究

通过试验系统地研究了ＬＤ７铝合金的单级和两级时效工艺。结果表明，与传统的单级时效相比，两级时效在不降低室温强度，硬度的前提下，可显著提高合金的电导率及高温性能。