Microstructure investigations of ball milled materials

HREM and FEG TEM were emphasized and extensively used to follow the most subtle changes in the structure and composition of ball-milled Cu, Fe-Cu, and thermally decomposed Fe60Cu40. Some significant results are obtained and summarized as follows: HREM shows that the deformation of ball-milled copper proceeds mainly by twinning and shear bands (SBs) formation. The nano-grains formed during ball milling (BM) contain a high density of dislocations. The grain boundaries (GBs) of nanocrystalline (NC) Cu prepared by BM are ordered, curved, and strained, but disordering, lattice distortion, and nanovoids in local regions were frequently observed. Nanoscale composition analysis on mechanically alloyed Fe16Cu84 shows that the average Fe content in both the interior of grains and the GBs is close to the designed composition, which proves that a supersaturated solid solution has really formed. However, the Fe content is rather inhomogeneous between the larger and smaller grains, which infers the inhomogeneous mixing of Fe and Cu during mechanical alloying (MA). NC structure and the mechanical force-enhanced fast diffusion are the reasons of the formation of supersaturated solid solutions in immiscible systems with positive enthalpy of mixing. HREM observations carried out with the thermally decomposed Fe60Cu40 solid solution show that the Nishiyama (N-W) or Kurdyumov-Sachs (K-S) orientation relationships exist between alpha-Fe and Cu. Energy dispersive X-ray spectra (EDXS) results show that the Cu content in these alpha-Fe grains reaches as high as 9.5 at.% even after heating to 1,400 degrees C, which is even higher than the maximum solubility of Cu in gamma-Fe at 1,094 degrees C.     

酞菁光敏剂对S180移植瘤的疗效

研究了GaS_4PC,ZnS_2PC两种酞菁在激光照射下对S180肉瘤的疗效,并讨论了其他酞菁光敏剂对癌细胞的杀伤效果。     

Lysophosphatidylcholine is involved in the antigenicity of oxidized LDL

Lysophosphatidylcholine (LPC) is formed by hydrolysis of PC in low density lipoprotein (LDL) and cell membranes by phospholipase A2 or by oxidation. Oxidized (ox) LDL activates endothelial cells, an effect mimicked by LPC. oxLDL also has the capacity to activate T and B cells, and antibody titers to oxLDL are related to the degree of atherosclerosis. The antigen in oxLDL responsible for its immune-stimulatory capacity is not well characterized, and we hypothesized that LPC was involved. We demonstrate herein the presence of antibodies against LPC, both of the IgG and IgM isotype, in 210 healthy individuals. This antibody reactivity was not specifically related to oxidation of the fatty acid moiety in LPC, since LPC containing only palmitic acid showed antibody titers equivalent to those of LPC containing unsaturated fatty acids. Antibody titers to PC were low compared with LPC, and hydrolysis of PC at the sn-2 position is thus essential for immune reactivity. There was a close correlation between anti-oxLDL and anti-LPC antibodies. Furthermore, LPC competitively inhibited anti-oxLDL reactivity, which indicates that LPC may explain a significant part of the immune-stimulatory properties of oxLDL. LPC, being a lipid, is not likely to be an antigen itself. Instead, LPC could form immunogenic complexes with peptides, which may induce and potentiate immune reactions in the vessel wall. This study adds to the evidence that LPC is an important component of oxLDL and emphasizes the potential role of phospholipase A2 in atherosclerosis.     

Diagnosis and treatment of iatrogenic ureteral injury

Diagnosis and treatment of 17 patients who sustained 20 iatrogenic ureteral injuries were analyzed. Primary operations in which ureteral injury occurred are almost gynecologic procedures and general surgery. Injuries were managed by ureteroureterostomy in four, ureteral stent in one, removal suture ligation and ureteral double J-catheter in one, ureteroneocystostomy in ten, psoas-hitch technique and ureteroneocystostomy in one, nephrectomy in two. All patients with appropriate repair were followed-up periods of three to five years. Renal function of these patients had optimal results. When ureteral injury occurs, B-US, IVU, cystoscopy, retrograde ureterography or infusion of dye may be useful. An appropriate repair should be chosen according to length and position of ureteral injuries. Reoperation was optimal in two to three weeks. Immediate recognition of accidental ureteral injury provides optimal results. Patients with unrecognized injuries had suboptimal results.     

EC与~（99m）Tc－GH之间的配体交换反应动力学研究

实验表明，ＥＣ浓度与配体交换反应速度常数无关，体系的ｐＨ值对速度常数和９９ｍＴｃ－ＥＣ的标记率影响较大。测定并计算了不同ｐＨ值的交换反应速度常数。结果表明，为保证用配体交换法制备９９ｍｃ－ＥＣ时９９ｍｃ－ＥＣ的标记率大于９０％，体系的ｐＨ值必须≥８。     

新型高性能脉冲峰值保持电路

本文介绍了两种新型跨导型脉冲峰值保持器，分别用于多丝正比室（ＭＷＰＣ）和复合晶体闪烁探测器（Ｐｈｏｓｗｉｃｈ）输出脉冲信号的形状和幅度分析。电路的跨导放大级采用跨导型集成运算放大器，使电路结构简单化，且性能优良可靠，能响应输入脉冲最小上升时间分别为５０ｎｓ（Ｐｈｏｓｗｉｃｈ）和５００ｎｓ（ＭＷＰＣ）的信号，在４０ｄＢ的动态范围内，两电路的积分非线性均好于０．１％，特别适用于空间γ射线观测。     

Invasiveness of LiTaO/sub 3/ and GaAs probes in external E-O sampling

Disturbances of signals on a coplanar waveguide (CPW) induced by the presence of LiTaO/sub 3/ and GaAs electrooptic probes in external electrooptic (EO) sampling have been simulated and compared quantitatively. The finite-difference-time-domain method is used to simulate the full wave field around a coplanar waveguide on a GaAs substrate in an external EO sampling configuration. The results indicate that the induced signal disturbance, or invasiveness, of a LiTaO/sub 3/ probe is almost ten times that of a GaAs probe in terms of the magnitude of S/sub 11/, but that LiTaO/sub 3/ yields about two times the EO response for a given S/sub 11/ and optical probing wavelength. The transparency of LiTaO/sub 3/ to shorter wavelengths, however, allows an even higher sensitivity for this material relative to GaAs. The results suggest that these probes do not exhibit significant invasiveness (magnitude of S/sub 11/ smaller than -40 dB), if they are removed from contact by the distance of CPWs center conductor width.<>     

Hot corrosion ofα-SiC ceramics by V2O5 melt

The corrosion behaviour of-SiC in V₂O₅ melt has been investigated at elevated temperatures. The corrosion products on the surface of the specimen are removed using HF. The morphologies are also examined. From the observations of bubble formation in the scale and the temperature dependence of the corrosion rate, a kinetic mechanism is proposed. Based on the consistency of the plotted data with the proposed equation and high values of surface reaction rate constant, a diffusion controlling process has been developed.