淀积条件对GDa—SiNx薄膜电学特性的影响

本文讨论了用辉光放电法制备氮化硅薄膜时衬底温度、射频功率和气体流量比对薄膜的电导率、介电常数和击穿强度的影响。通过优化生长条件，制备了优质非晶氮化硅薄膜，其介电常数为７．５、击穿强度为５．５ＭＶ／ｃｍ、电导率为１０－１３（Ωｃｍ）－１。     

接触传热表面粗糙度曲线的统计特征

测量了一般机械加工表面的轮廓曲线，基于小波变换提取了粗糙度曲线，分析了轮廓高度和接触峰高度的统计分布特征。研究结果表明，轮廓高度不服从严格的正态分布，但具有一定的正态性，而接触峰高度的统计特征与其评定标准有直接的关系。因此，对于接触热阻的计算模型来说，接触点数的计算应以合理选取接触峰的评定标准为前提。     

厌氧反应除硫酸盐的新工艺

对目前消除硫酸盐对厌氧反应影响的几种方法进行了归纳评价 ,并提出了硫酸盐还原 微电解除硫化物 厌氧反应的新思路 ,从理论上分析了这种新工艺的特点 ,同时提出了存在的问题及对策。     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

Modeling low-frequency electrode-type resistivity tools in invadedthin beds

The authors formulate and implement a numerical mode-matching (NMM) method to model electrode-type resistivity tools in invaded thin beds. The authors derive the low-frequency approximation of the Maxwell's equations to obtain the partial differential equation for the potential field. The new NMM program is validated by comparing the numerical results with those obtained from other dc programs. It is found that this new program is much faster than the program using the finite-element method (FEM), and hence is useful for routine interpretation of resistivity logs and for inversion     

AB活性污泥法污水处理技术的消化和创新

本文介绍漳州市东区污水处理厂AB法设计、运行的特点，总结了安装、运行的效果，提出了今后改进方法。     

Dissolution processes,hydrolysis and condensation reactions during geopolymer synthesis: Part II. High Si/Al ratio systems

The mechanisms of speciation of aluminate and silicate phases during dissolution and condensation stages of alumino-silicate geopolymer reactions characterised by Si/Al ≥ 3, have been investigated and the results compared to predictions of the partial charge model. Solid-state nuclear magnetic resonance (NMR) traces indicate that free [Al(OH)₄]⁻ species, present in lower silicate formulations such as Si/Al ≤ 1, do not occur in the present systems, suggesting that the condensation reaction between [Al(OH)₄]⁻ and silicate species is fairly quick and is consumed as soon as it is formed. This observation is also consistent with both calorimetric measurements and model predictions, as the condensation time increased exponentially with increased Si/Al ratio in the geopolymeric phase, indicating again that the high content of Al species in the gel phase greatly enhanced the condensation rate. The experimental observations suggest that the condensation process in these systems occurs in two stages: (a) quick condensation between aluminate and silicate species; followed by (b) a slow condensation stage solely involving silicate species.     

纺织信息的网上检索方法

主要介绍在网上检索纺织信息的几种方法和处理技术，为人们检索纺织信息提供了方便快捷的途径。     

Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008