铜蒸气激光器种子注入光腔的参数计算

用矩阵光学理论计算了由主振荡器和功率放大器组成的种子注入光腔。主振荡器光腔是由曲率半径R1=-250mm,R2=5000mm,相距L=2375mm的球面镜组成的正支非稳腔;功率非稳腔是由曲率半径R3=400mm,R4=5600mm,相距S=3000mm的球面镜构成的负支非稳腔。理论计算表明,该种子注入光腔可输出光束发散角约几十微弧的激光,可满足铜蒸气激光器主振荡器功率放大器(MOPA)的技术要求。     

低重分配概率的OVSF码重分配算法

在采用正交可变长扩频因子(OVSF)码作为信道化码的直接序列扩频码分多址系统中,提出用重分配概率作为重分配算法的一个新的评价指标,重分配概率越小,系统的计算复杂度越低。进而提出一种低重分配概率的、基于空码容量的重分配算法,在解决本次码阻塞的同时,兼顾对未来高数据速率的呼叫的支持能力,减少未来码阻塞发生。仿真证实,重分配概率比已有2种重分配算法都小。     

高坝通航技术在水口工程的新发展

水口水电站坝高101m,航运过坝采用一线三级船闸和一线垂直升船机。水口升船机是当时国内已建和在建同类升船机中总体规模最大的升船机,也是我国第一座自行设计、制造、施工和安装的大型升船机。在塔楼结构动力分析和试验研究、塔楼滑框倒模施工、升船机整体模型试验研究、承船厢整体制造和浮运、船厢安全锁定装置和船厢对接密封装置试验研究、整机安装及联调试验等方面充分体现了水口升船机的建成是高坝通航技术的新发展。     

Properties of high reinforcement-content aluminum matrix composite for electronic packages

Aluminum matrix composites reinforced by a high volume fraction of ceramic particles provide a novel solution to electronic packaging technology, because of their high thermal conductivity, compatible and tailorable coefficient of thermal expansion (CTE) with chips or substrates, low weight, enhanced specific stiffness, and low cost. In this paper, SiC-particle-reinforced aluminum matrix composites are fabricated by the cost-effective squeeze-casting technology, and their microstructure characteristics, thermo-physical, and mechanical properties are investigated. The reinforcement volume fraction is as high as 70% and composites with linear CTE of 6.9–9.7×10^–6 °C^–1 and thermal conductivity of 120–170 W m^–1 °C^–1 are produced. The composites can be electric-discharge machined, ground, and electric-spark drilled. An electroless nickel layer is plated on the composite by the conventional procedures. Finally, their potential applications in electronic packaging and thermal management are illustrated via prototype examples.     

防腐蚀涂料的性能与选择

介绍并比较几种常用的防腐蚀涂料的品种、组成和性能特点，提出防腐蚀涂料的选择原则。     

一种单片机控制的指令转换器的设计

采用89C51单片机，串口扩展芯片8251、中断扩展芯片8259等器件设计了一种指令格式转换器。     

激光抛光技术的发展与展望

介绍激光抛光技术的发展历史,阐明激光抛光的应用现状及未来的发展前景,论述了激光抛光的工艺特点和作用机理,将激光抛光技术与其它抛光技术进行了全面的对比,指出激光抛光的优势及其存在的问题。     

Control of stroma-dependent hematopoiesis by basic fibroblast growth factor: stromal phenotypic plasticity and modified myelopoietic functions

The immunological agglutination reactions of physically absorbed F(ab')2 molecules onto anionic and cationic latex particles have been investigated by means of optical absorbance measurements. These measurements have been conducted under different conditions to determine the most influential factors. Surface F(ab')2 and BSA densities, particle concentration in the reaction medium and polyethylene glycol concentration are some of these factors. Sensitized cationic and anionic latexes differ considerably with respect to their colloidal stability and reactivity. As a general rule, the sensitized cationic latex has a relatively higher colloidal stability and hence, it provides reagents with a better optical response. Less than 0.025 microgram/ml of C-reactive protein has been detected using this particle enhanced optical immunoassay.     

GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

Applications of a super element model for non-linear analysis of stiffened box structures

Numerical investigations are carried out to verify the new super element model developed in Reference 1 for non-linear analysis of stiffened box structures. The results presented here are obtained from a variety of examples which are chosen to illustrate the accuracy and convergence of the model in various applications. Good agreement is obtained for most of the problems considered and the present formulation is found to be accurate and economical for preliminary engineering design.