深圳抽水蓄能电站上水库主坝坝型选择

本文着重介绍了在可研究性阶段,通过对深圳抽水蓄能电站上水库主坝设计过程中坝型选择的相关因素的分析,确定其大坝类型的过程。     

多极化目标特性测量雷达跟踪接收机的设计与性能分析

基于多极化目标特性测量雷达的设计，结合实际应用，给出了多极化目标特性测量雷达跟踪接收机的设计与工程实现，并对影响跟踪精度的因素进行了分析。     

广义预测控制系统的仿真软件设计与开发

介绍了基于广义预测控制的模型预测控制（MPC）系统仿真软件的开发与实现过程。该软件包含了MAC，IMAC，DMC，DDMC和GPC五种预测控制算法，可以用不同的方法实现对预测控制系统的综合性仿真以及控制器参数的调整。利用该软件可对模型预测控制系统的作用机理做进一步仿真分析，并有助于定性分析各种算法中设计参数对系统性能的影响以及不同算法之间的区别。     

Photoreactivation of Escherichia coli following medium-pressure ultraviolet disinfection and its control using chloramination.

Ultraviolet (UV) disinfection is becoming increasingly popular as an alternative disinfection technology to chlorination in recent years. In this study, we investigated the photoreactivation of Escherichia coli following medium-pressure (MP) UV disinfection of synthetic water by a bench-scale collimated beam apparatus. The UV doses ranged from 1.6 -19.7 mWs/cm2 and photoreactivation was investigated for 6 hours under fluorescent light. In addition, chloramination was applied after UV disinfection to investigate its ability to control photoreactivation. It was found that photoreactivation occurred for all UV doses tested and the increase in bacteria numbers ranged from 0.04 to 1.35 log10. However, the degree of photoreactivation decreased with increased UV doses. Chloramination experiments revealed that the addition of 0.5 mg/l of monochloramine resulted in suppression of photoreactivation for 1 hour only. An increased monochloramine dose of 1 mg/l was found to prevent photoreactivation for the entire duration of the experiment. The results of this study have shown that photoreactivation occurs even after MP UV disinfection, although it is of a lesser extent at higher UV doses. This study has also established that secondary chloramination can effectively suppress and eliminate photoreactivation with a chloramine dose of 1 mg/l.     

立方相GaN的持续光电导

研究了金属有机物化学气相外延 (MOVPE)方法生长的非故意掺杂的立方相 Ga N的持续光电导效应 .在六方相 Ga N中普遍认为持续光电导效应与黄光发射有关 ,而实验则显示在立方 Ga N中 ,持续光电导效应与其中的六方相 Ga N夹杂有关系 ,而与黄光发射没有关系 .文中提出 ,立方相 Ga N与其中的六方相 Ga N夹杂之间的势垒引起的空间载流子分离是导致持续光电导现象的物理原因 .通过建立势垒限制复合模型 ,解释了立方相 Ga N的持续光电导现象的物理过程 ,并对光电导衰减过程的动力学作了分析 .对实验数据拟合的结果证明以上的模型和推导是与实验相符的 .     

Solution of large deformation contact problems with friction between Blatz-Ko hyperelastic bodies

The present paper is devoted to the analysis of the contact problems with Coulomb friction and large deformation between two hyperelastic bodies. One approach to separate the material nonlinearity and contact nonlinearity is presented. The total Lagrangian formulation is adopted to describe the geometrically nonlinear behavior. Nondifferentiable contact potentials are regularized by means of the augmented Lagrangian method. Numerical examples are carried out in two cases: rigid-deformable contact and deformable-deformable contact with large slips. The numerical results prove that the proposed approach is robust and efficient concerning numerical stability.     

A generalized equation for the prediction of melting temperatures of homopolymers and copolymers

A generalized equation was derived to calculate the melting temperatures of homopolymers and copolymers. The Gibbs‐Thomson equation for homopolymers and a modified application to copolymers were derived using the proposed equation. The melting temperature T_m⁰ in the Flory equation corresponds to the melting temperature T_m^C,∞ of copolymer crystals with stems of infinite length. Also, T_m^C,n*, the melting temperature for copolymer crystals with stems containing the maximum possible number of structural units, n*, should be used instead of T_m⁰ as the basis of supercooling in crystallization. The proposed equation shows good agreement with experimental data for α‐alkene‐ethylene homogeneous copolymers.     

中温换热器检查及修复方案

经分析认为中温换热器缺陷出现的主要原因是H2 S腐蚀。采取更换短管以及补焊上段下管板的措施进行修复 ,取得了满意的效果     

Bi3+对纳米MnO2水热合成的影响研究

在中性和酸性条件下，以MnO2作为锰源，通过水热合成了纳米MnO2，通过XRD和TEM对产物进行的观察表明，在酸性条件下，向溶液中添加一定量的Bi^3 ，产物的晶型由α型向γ型转化，产物形貌由针状、丝状向颗粒状转变。     

烷基烷氧基硅烷的合成方法及其在涂料中的应用

介绍了烷基烷氧基硅烷的合成方法(包括烷基的引入方法和烷氧基的形成方法)、近几年来在涂料中的应用及其结构与性能的关系。