世界主要大型石化公司发展战略

分析了世界主要大型石化公司经营发展战略的特点,归纳了其利用资本运作,加快实现核心业务,稳步发展基础型化工业务、高附加值型业务,完善优化研发体系、强化技术领先优势、优化市场布局,不断提高全球化程度,加快增强区域市场竞争地位等主要战略举措.     

秸秆黄腐酸包膜尿素在水稻上的应用效果

在石灰性土壤上进行田间小区试验，结果表明，秸秆黄腐酸包膜尿素能满足水稻生长最大效率期对营养的要求，有利于有效穗的分化，提高结实率。等氮量试验平均增产9．6％，等重量试验平均增产7．4％。     

CONDENSING HEAT TRANSFER IN AN ADVANCED TWO-PHASE CLOSED THERMOSYPHON

1 INTRODUCTIONClosed thermosyphon has been developed to enhance heat transfer and recover wasteheat in various process industries [1,2].Stimulated by this success,a new type oftwo-phase closed thermosyphon was designed by inserting respectively two inner tubesinto the thermosyphon,one in the boiling section and the other in the condensing sec-tion.The two-phase flow boiling heat transfer coefficient was calculated successfully onthe basis of Chen's dual-mechanism [3].A boiling heat transfer model for thetwo-phase closed thermosyphon with an inner tube in the boiling section was pro-     

Controllable Fabrication of Co3−xMnxO4 with Tunable External Co3+/Co2+ Ratio for Promoted Oxygen Reduction Reaction

Co_3?xMn_xO₄ is a bimetal oxide with excellent electrochemical activity in alkaline solution, has been regarded as a promising alternative in the field of ion-air batteries and proton exchange membrane fuel cell (PEMFC). Herein, we report a simple solvothermal-calcination method to fabricate Co_3?xMn_xO₄ with tunable external Co³⁺/Co²⁺ and Mn³⁺/Mn²⁺ ratio. The tunable ratio of element valence in the bimetal results in a higher exposure of active center for oxygen redox reaction (ORR), and thus lead to a better ORR activity, which was confirmed by X-ray photoelectron spectroscopy characterizations and electrochemical measurements. Specially, Co_1.8Mn_1.2O₄ with a Co³⁺/Co²⁺ ratio of 2.08 showed an overpotential of 0.37 V at benchmark ORR current density of 3 mA/cm² in 0.1 M KOH, which is lower than that of pure oxide (Mn₃O₄ 0.53 V and Co3O4 0.56 V). In addition, the as prepared Co_1.8Mn_1.2O₄ exhibited a positive half-wave potential (0.83 V vs RHE) due to their more active sites, promotes charge transfer, adsorption and desorption of oxygen species. This work provides a strategy for the design and fabrication of earth-abundant, low-cost electrocatalysts for PEMFC in practical applications.

Graphic Abstract

Co_3?xMn_xO₄ was fabricated by tuning external Co³⁺/Co²⁺ and Mn³⁺/Mn²⁺ ratio, and the activity initially shows a positive correlation with the ration of Co³⁺/Co²⁺ in Co_3?xMn_xO₄.

     

Al2O3—Si3N4—ZrO2多相复合材料在燃煤MHD发电中的应用

采用Ａｌ２Ｏ３基料，添加第二相（ＺｒＯ２，Ｓｉ３Ｎ４）和纤维相（ＺｒＯ２，（ｆ），以热压法制成Ａｌ２Ｏ３－Ｓｉ３Ｎ４－ＺｒＯ２多相复合材料。研究表明，新材料在青静态和动态试验中表现出良好的综合性能：１０７３Ｋ时的高温电阴率ｐ＝１．２４×１７＾７Ω．ｃｍ；静态熔渣最大腐蚀速率Ｖｓ＝０．１６μｍ／ｈ；动态最大腐蚀速率Ｖｄ＝０．４４９μｍ／ｈ。与Ａｌ２Ｏ３陶瓷相比，室温抗弯强度提高９３％，抗热震临界...     

软件专业高职实训教学法研究

本文围绕软件专业建设重点难点开展理论教学与实践教学研究,构建软件专业高职实训教学框架体系,通过实训内容项目化。强化实训环境建设,以力求实训效果职业化,从而使教学工作真正步入高等职业教育轨道,提高学生就业机会,实现人才培养目标。     

塑料注塑加工中结晶与取向的探讨

介绍结晶性塑料在注塑过程中的塑化特点、取向与结晶的关系及其对制品性能的影响，注塑参数对结晶性塑料塑化、取向、结晶的影响。讨论了在实际工作中如何利用这些特性进行注塑机塑化系统、模具的设计并确定注塑工艺，从而得到品质优良的制品。     

中美意德硫磺回收技术交流

简要介绍了第四次中国石化总公司硫磺回收技术协作组年会上美意德３公司交流的技术，分别为：ＢＯＣＳＵＲＥ富氧硫回收工艺、高转化率Ｃｌａｕｓ工艺、Ｃｌｉｎｓｕｌｆ－ＤＯ工艺和Ｃｌｉｎｓｕｌｆ－ＳＤＰ工艺，反映了目前国外硫回收及尾气处理的部分进展状况。     

Degradation and geometric isomerization of poly(N-propargylamides)

The stability of several poly(N-propargylamides) was investigated in solution and in solid state on the basis of molecular weight change with time, and further their thermal stability was investigated by TGA. When the stability of poly(N-propargylamides) with varying pendent groups was compared, polymers with pendent groups of moderate size showed the highest stability in solution. Too short and too bulky pendent groups were not favorable for the stability of polymers. When poly(N-propargylheptanamide) (poly(6)) was stored in THF as solution at −20 °C in the absence of oxygen in dark, its degradation rate was the lowest. The degradation rate of poly(6) depended on the solvents used, which may be related to different solubility of oxygen in these solvents. Polymers with high cis contents degraded faster than polymers with low cis contents did. Addition of TEMPO and DPPH into the poly(6)/THF solution more or less depressed the degradation of poly(6). The degradation of polymer main chain in solution was always accompanied by the decrease of cis content, i.e. geometric isomerization from cis- to trans-structure. When the polymers were stored in the solid state at −20 °C, the polymers having alkyl pendent groups with moderate length were more stable than those with bulky pendent groups. Geometric isomerization occurred along with degradation in the solid state as well.     

大直径浅圆仓缩尺模型试验研究

大直径浅圆仓在生产过程中,由于仓底的偏心卸料使筒仓仓壁产生不均受力,会给筒仓结构的使用带来安全隐患。通过对浅圆仓缩尺模型试验,模拟筒仓生产过程的卸料状况,并对筒仓仓壁及仓底廊道顶部进行压力测试,将测试结果与理论计算进行对比,从而得出偏心卸料与静载状态的超压系数,为大直径浅圆仓设计提供依据。