Growth and characterization of hot-wall epitaxial CdTe on (111) HgCdTe and CdZnTe substrates

Thin CdTe films were deposited by hot-wall epitaxy (HWE) on (111) HgCdTe and CdZnTe substrates at temperatures from about 140 to 335°C. X-ray rocking curves were used to show that crystal quality of the CdTe (111)B films improved as substrate temperature increased from 140 to about 250°C. Rocking curve values for full width at half maximum (FWHM) decreased from 2–4 degrees at 140–150°C to less than 100 arc-s at 250°C, and a FWHM of 59 arc-s was the lowest value observed near 250°C. The FWHM of the HWE CdTe was found to be insensitive to growth rate below about 400Å/min, but increased to four degrees at 1250Å/min. X-ray diffraction confirmed that films grown on the B-face at higher temperatures were epitaxial, but contained a significant volume fraction, 35% to 50%, of rotational in-plane twins. Electron microscopy confirmed a coarse twin density, and photoluminescence spectra showed an absence of excitonic emission in the HWE films. Simultaneous growth on two (111) HgCdTe substrates with different surface polarities between 230°C and 335°C showed that deposition rate on the A-face decreased relative to that on the B-face as temperature increased. Films grown on the B-face exhibited better surface morphologies than those grown on the A-face.     

泥沙起动条件及机理的非线性研究

 分析了单颗粒、均匀沙及非均匀沙的起动现象及其机理，认为泥沙的起动属于突变论研究的范畴。从泥沙起动所遵循起动条件的力学规律出发，导出泥沙起动条件方程。在此基础上，利用尖点突变性质对各种泥沙起动现象及机理进行了描述和说明。     

银矿尾矿砂高强陶粒的研制

以广西凤凰银业有限公司的尾矿砂和废矿页岩为主要原料，在前期工作的基础上，经过实验室试验和生产线中试，成功生产出700～1000密度等级、筒压强度超过10MPa的高强陶粒。这为银矿的尾矿砂和废矿页岩的处理也为我国高强陶粒的生产探索了一条新路。     

Feasibility study on the use of polyallyldiglycol-carbonate cell dishes in TUNEL assay for alpha particle radiobiological experiments

In the present work, we have studied the feasibility of a method based on polyallyldiglycol-carbonate (PADC) films to investigate the effects of alpha particles on HeLa cervix cancer cells. Thin PADC films with thickness of about 20 μm were prepared from commercially available CR-39 films by chemical etching to fabricate custom-made petri dishes for cell culture, which could accurately record alpha particle hit positions. A special method involving “base tracks” for aligning the images of cell nuclei and alpha particle hits has been proposed, so that alpha particle transversals of cell nuclei can be visually counted. Radiobiological experiments were carried out to induce DNA damages, with the TdT-mediated dUTP Nick-End Labeling (TUNEL) fluorescence method employed to detect DNA strand breaks. The staining results were investigated by flow cytometer. The preliminary results showed that more strand breaks occurred in cells hit by alpha particles with lower energies. Moreover, large TUNEL positive signals were obtained even with small percentages of cells irradiated and TUNEL signals were also obtained from non-targeted cells. These provided evidence for the bystander effect.     

GCr15轴承钢的热变形模拟试验研究

利用先进的Gleeble-2000热模拟试验机，对GCr15轴承钢某一轧制过程进行模拟试验，测定出GCr15轴承钢动态CCT曲线，并结合微观组织分析，制定合理的GCr15轴承钢轧后控制冷却工艺，以期达到提高GCr15轴承钢质量的最终目的。     

X射线三轴晶衍射法测量半绝缘GaAs单晶的化学配比

采用X射线三轴晶衍射法,根据As间隙原子对作为过量As在GaAs单晶材料中存在的主要形式的模型,可以无损、高精度测量半绝缘GaAs单晶的化学配比.并探讨了引起晶格变化的原因及其与熔体组分的关系,对于制备高质量GaAs单晶及其光电器件具有重要的意义.     

韶钢第三炼钢厂2#板坯连铸机漏钢原因分析

针对韶钢三炼钢板坯连铸机的漏钢原因从设备与工艺上进行分析,提出整改措施,对韶钢以后的板坯发展提供了经验.     

新经济增长理论对我国人力资本发展的借鉴

新经济增长理论为人力资本理论注入了新的内容,为各国如何利用人力资本发展经济提供了理论指导。分析了新经济增长理论中有关人力资本的理论,以此对我国经济和人力资本的发展提出了一些借鉴;收益递增模型。     

传感器网络中基于二元簇的节能路由算法

传感器网络中的分簇算法已经被证明能够有效地节约能量。据此提出了一种基于二元簇的路由算法,其基本思想是网络中的每个节点同时属于2个不同簇,利用二元性来减少在路由发现中的资源浪费,并能够更加确定地发现路由以节约资源。理论分析和模拟实验都表明,该算法在能量消耗和网络生命周期延长方面较优。     

Integrated Personal Mobility Architecture: A Complete Personal Mobility Solution

The high expectations and demand for users to access the Internet from anywhere at anytime has made user mobility an important part of the design and development of the next generation mobile communications and computing. Traditionally user mobility has been divided into two areas: Terminal Mobility and Personal Mobility. In recent years terminal mobility has focused on the movement of the terminal and developed extensions to IP protocols such as Mobile IP. In contrast, personal mobility has only received limited attention, and is somewhat lagging behind. This research has either focussed on personal mobility in communications or personalisation of operating environments. As a result, to date no framework for providing true personal mobility has emerged. In this paper, we introduce a new personal mobility framework called IPMoA (Integrated Personal Mobility Architecture), which integrates both aspects of personal mobility to provide a complete personal mobility solution, and illustrate the viability of this approach through a proof-of-concept implementation.