Effect of plasticizers on the thermal decomposition of chlorinated polyvinylchloride

Plasticized samples of chlorinated polyvinylchloride (CPVC) were investigated by using thermogravimetric (TG) analysis and differential scanning calorimetry (DSC). Three different plasticizers were studied, namely, dioctyl phthalate (DOP), alkyldiaryl phosphate ester (Santiciser 2148), and triaryl phosphate ester (Reofos 50). TG experiments in nitrogen showed one major decomposition stage, involving dehydrochlorination, and minor pyrolysis reaction of the hydrocarbon residue. In contrast to the three stages previously reported to occur in the nonplasticized‐stabilized CPVC, TG analyses in air showed two distinctive decomposition stages for the plasticized CPVC samples. The DOP system provided a suggestion of a third stage. The first decomposition stage was due not only to the loss of all the chlorine present, but also to loss of the plasticizer or its decomposition products. The second decomposition stage was mostly due to char oxidation, the char being formed almost exclusively from the DCE and VDC units in CPVC polymer. DSC results showed that in the presence of nitrogen, there was no significant plasticizer effect on the thermal decomposition behavior of CPVC up to about 330°C, while in air the DSC traces also show no significant differences below 400°C. The two phosphate plasticizers showed no significant differences in their effect on the thermal decomposition behavior of CPVC under the same experimental conditions. It is believed that P₂O₅ and polyphosphoric acid are among the main constituents of the residua. These would impart a protective glassy surface to the char. This will facilitate effective flame retardant action. This preliminary conclusion is based on the premise that the more stable the char layers are, the more resilient will be the protective layer, and consequently, the better the flame retardant effect. J. VINYL ADDIT. TECHNOL., 11:21–27, 2005. © 2005 Society of Plastics Engineers     

Some aspects of the analysis of coal by X-ray fluorescence spectroscopy

Bituminous coal samples from 84 distinct sources were analysed by conventional British Standards (BS) methods for phosphorus, sulphur, chlorine, ash and the ash-forming elements (calcium, silicon, aluminium, iron, sodium, magnesium, potassium, titanium and manganese). In most cases four determinations were made per element per source. Samples were crushed to ?212 μm (72 BS mesh) and pressed into aluminium cups at 20 t in^?2 (309 MPa) without binder or backing. Two pellets from each sample were analysed by wave-length dispersive X-ray fluorescence techniques, using a spectrometer equipped with a rhodium rube; the X-ray count took 60 s. The X-ray results were calibrated against the conventional results using multiple regression. The accuracy obtained was comparable with routine ‘wet chemical’ techniques. The X-ray technique is suitable for the routine determination of large numbers of samples.     

Solution processing and properties of molecular composite fibers and films

Experimental studies of fiber wet-spinning and solution processing of films of molecular composites are presented. The rigid rod polymer was poly (p-phenylenebenzobisthiazole) (PPBT) and the flexible polymers were poly (2,5(6′)-benzimidazole) (ABPBI) and poly (2,5(6′)-benzothiazole) (ABPBT). Effects of the flexible polymer molecular entanglements in solution on the processing are discussed. These fibers and films have very high modulus and strength, which improve upon heat treatment. The uniaxial modulus of highly oriented molecular composites follows the linear rule of mixtures.     

金属离子掺杂二氧化钛及水体光催化脱氮研究

采用溶胶-凝胶法制备了掺杂Ce^3＋、La^3＋、Ag^＋、Fe^3＋的TiO2光催化剂，以考察其薄膜和粉体形式对水中无机氮的光催化去除效果和活性．用所制备的催化剂对含氨氮-亚硝酸氮的混合液进行了光催化脱氮研究．本文利用UV—Vis吸收光谱、XRD和TEM对催化剂进行了表征．同时，对影响TiO2光催化效率的因素：如掺杂金属离子的种类、浓度、涂膜层数、反应液中有无Fe^2＋、不锈钢和玻璃载体、反应器的构型等进行了探讨，并对今后的研究进行展望．经过2h紫外光照射反应，实验最佳脱氮效果：金属离子掺杂TiO2薄膜型催化剂总氮去除率在30％左右，金属离子掺杂粉末型催化剂光催化最高总氮去除率可达41．7％．     

Mark-Houwink-Sakurada coefficients for conventional poly(methyl methacrylate) in tetrahydrofuran

Summary Intrinsic viscosities [] in tetrahydrofuran (THF) at 30°C are reported for ten narrow molecular weight distribution poly(methyl methacrylate) (PMMA) samples covering nearly two orders of magnitude in molecular weight. By combining the viscosity results with absolute weight-average molecular weights determined via low-angle laser light scattering (LALLS) experiments, we have accurately determined the Mark-Houwink-Sakurada (MHS) parameters for this polymer-solvent pair (K=7.56x10⁵ and a=0.731, when [] is in dL g^-1).     

Thermomechanical heat of deformation studies on cis-polybutadiene

Thermomechanical heat of torsional deformation measurements have been made on crosslinked cis-polybutadiene by means of a Calvet microcalorimeter operated at 30°C. When corrected for volume changes utilizing the Gaussian statistical theory of elasticity, the data gave a value for the relative energy contribution to the torsional couple, $\text{M}{}_{\mathrm{e}}\text{M}$, of 0.14 ± 0.02. Measurements were also made on a sample subjected to simple tensile deformations. The relative energy contribution to the tensile force ($\text{f}{}_{\mathrm{e}}\text{f}$) was found to agree within experimental error with the value obtained for $\text{M}{}_{\mathrm{e}}\text{M}$, and the two results gave an average value for din $\text{〈r}{}^2{}_0\text{〉}\text{d}\text{T}$ of 4.1 × 10^?4 K^?1.     

A comparison of vapour pressure measurements of quinizarin and leuco-quinizarin via transpiration and thermogravimetry

The vapour pressure of solids can be obtained using a number of methods, including the Knudsen effusion method, the Knudsen torque-effusion method and a transpiration method. Each method has benefits and disadvantages. Reported is a comparison of vapour pressure data for two compounds, quinizarin and leuco -quinizarin, using a transpiration method and a recently developed method based on thermogravimetry. Thermogravimetry provided vapour pressure–temperature dependence data for each compound with expediency and in agreement with the transpiration method.     

纳米碳酸钙在非等温条件下热分解动力学及机理研究

Experiments on thermal decomposition of nano-sized calcium carbonate were carried out in a thermo-gravimetric analyzer under non-isothermal condition of different heating rates (5 to 20K·min-1). The Coats and Redfern's equation was used to determine the apparent activation energy and the pre-exponential factors. The mechanism of thermal decomposition was evaluated using the master plots, Coats and Redfern's equation and the kinetic compensation law. It was found that the thermal decomposition property of nano-sized calcium carbonate was different from that of bulk calcite. Nano-sized calcium carbonate began to decompose at 640℃, which was 180℃lower than the reported value for calcite. The experimental results of kinetics were compatible with the mechanism of one-dimensional phase boundary movement. The apparent activation energy of nano-sized calcium carbonate was estimated to be 151kJ·mol-1 while the literature value for normal calcite was approximately 200kJ·mol-1. The order of magnitude of pre-e     

Lipids of seven cereal grains

Grain samples of representative varieties of barley, corn, oats, rye, sorghum, triticale, and wheat grown commercially in the north central US were analyzed. Chemical constituents of the varieties studied are presented to provide an overview of their characteristics. Lipids of the milled grain samples were solvent extracted, classified by silicic acid column chromatography, and separated by thin layer chromatography. Fatty acid composition of the total lipid was determined by gas liquid chromatography and the fatty acid content was determined by saponification and extraction. Total lipid content of the grains ranged from 2.3% for ‘Polk’ wheat to 6.6% for ‘Chief’ oats. Lipid composition varied considerably. The row crops, corn and sorghum, have a high neutral lipid and low glycolipid content. The small grain varieties have a more balanced distribution among neutral lipids, glycolipids, and phospholipids. Fatty acid composition of the total lipid was similar for all grains. Minor qualitative differences were noted among the lipid classes of the 7 cereals.     

Evaluation of thermodynamic theories to predict interfacial tension between polystyrene and polypropylene melts

The commonly used thermodynamic theories (mean field theory and the square gradient theory) to predict interfacial tension between polymers have been modified. The results of these theoretical developments have not yet been fully tested and compared to experimental data. In this paper, experimental data for the effects of temperature, molecular weight, and molecular weight dispersity on interfacial tension for polypropylene/polystyrene polymer pairs are compared with the predictions of the new versions of the above theories. To evaluate these theories, it is necessary to know the Flory-Huggins interaction parameter for the polymer pairs studied. The relation correlating the Flory-Huggins interaction parameter to the Hildebrand solubility parameter was not suitable for evaluating the theoretical predictions of interfacial tension. Instead, the Flory Huggins interaction parameter was expressed as the sum of an enthalpic contribution, χ_H, and entropic contribution, χ_s. In the absence of reliable experimental values, a method was developed to evaluate the two contributions, based on interfacial tension data. The procedure provided an interaction parameter that is allowed to depend on molecular weight. When this approach was used, the predictions of only the new version of the square gradient theory were in good agreement with the experimental data for the influence of temperature and molecular weight on interfacial tension. However, the theory predicted the effect of polydispersity on interfacial tension only at high temperatures.