溶聚丁苯橡胶聚合溶液粘度的研究

研究了（乙二醇二甲醚、二乙二醇二甲醚）－正丁基锂－抽余油体系地溶聚乙苯橡胶不同聚合时间聚合溶液粘度的变化，发现聚合溶粘度与活性种的活性有关，高温严重破坏活性种的活性，计节剂量是杀死活性种活性的另一因素。同时考察了不同苯乙烯／丁二烯（S／B）体系，正丁基锂引发剂用量对聚合粘影响规律，发现S／B越大，聚合粘度越小，S／B越小，聚合粘度越大，引发剂用量减少，聚合液粘度增大。     

Shrinkage and splitting of microcracks under pressure simulated by the finite-element method

The two-dimensional finite-element method is applied to analyze the shrinkage and splitting of microcracks regularly arranged on or perpendicular to a grain boundary under pressure. Grain-boundary and surface diffusions are coupled by the boundary conditions at the triple point of the microcrack surface and the grain boundary. The shrinkage and splitting processes for the two kinds of microcracks are revealed by detailed finite-element analyses. For the microcrack lying on a grain boundary, it first shrinks to a small void shape, then the void is split by the grain boundary and the two split voids assume a cylindrical shape under the capillary force of the surface. For the microcrack perpendicular to the grain boundary, it is split into two segments by the grain boundary during the early stage of shrinkage. Then, the split microcracks stop shrinking and evolve into two cylindrical channels with a circular section by the capillary force of the surface. These evolution processes are controlled by the applied pressure, microcrack spacing, ratio of grain-boundary diffusion to surface diffusion, and equilibrium dihedral angle, defined by surface and grain-boundary tensions. The influences of these controlled parameters on the evolution processes are numerically clarified based on a great number of finite-element analyses.     

液晶显示器生产中的激光退火和缺陷修复

由于在大面积玻璃基底上制备由多层材料构成的高质量薄膜晶体管象元驱动阵列工艺的复杂性，使有源矩阵液晶显示器（AMLCD）的成品率低、价格高。利用激光对AMLCD进行非晶硅薄膜的退火和电路缺陷的修复，可有效的改善AMLCD的性能，提高成品率和降低成本。本文在介绍了激光对非晶硅薄膜退火和电路缺陷修复常用激光器的特性后，讨论了激光对不同类型缺陷修复的原理和过程。最后，分析比较了不同类型激光退火方法的特点。     

多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。     

水性聚氨酯电导率与聚沉值的研究

研究了软（硬）段含羧基的水性阴离子纳米聚氨酯体系的n(NCO)/n(OH)比值，COOH的质量分类，反离子各类，合成方法与电导率关系及产生的原因；探讨了该体系的n(NCO)/n(OH)值，COOH的质量分数，合成方法与临界聚沉值（Cc.c)的关系和规律。并分析，比较了软（硬）段含羧基的水性阴离子聚氨酯体系电导率与Cc.c二者关系，得出了随COOH的质量分数升高，二者变化相同，随n(NCO)/n(OH)比值升高,二者变化相反的结论。     

无线信道中的电波传播

分析了信号在无线信道中传输时所经受的两种衰落,介绍了主要的无线传播模型,在此基础上提出了对抗衰落的措施。     

从催化裂化柴油中分离高纯度2,6-二甲基萘

以大庆石油化工总厂炼油厂催化柴油为原料 ,通过精馏分离得到二甲基萘 (DMN)窄馏分 (2 5 8～ 2 70℃ ) ,经糠醛溶剂抽提 ,减压蒸馏后 ,在 -10～ -2 5℃冷冻 2～ 5h ,离心分离制得纯度约 80 %的粗 2 ,6 DMN ,再经无水乙醇在 -10～ -2 5℃重结晶 ,得到纯度大于等于 98%的 2 ,6 DMN。     

Metabolism of lysophosphatidylcholine by swine platelets

Incubation of intact platelets from Sinclair(S-1) miniature swine with³²P-labeled lysophosphatidylcholine (lyso PC) indicated the presence of an active lysophospholipase with a pH optimum of 8.0 for hydrolysis of the substrate. However, lyso PC was incorporated into the membrane phosphatidylcholines by the acyltransferase pathway upon addition of ATP, Mg⁺⁺ and CoA to the platelet suspension. These results suggest that intact platelets are able to resist the cytotoxic effects of lyso PC in plasma, and the phospholipids in platelet membranes are not readily affected by the lipid environment of the plasma. The acyltransfer reaction apparently is saturated with endogenous free fatty acids since arachidonic acid added exogenously did not further enhance the incorporation activity. Neither the acyltransferase nor the lysophospholipase activity was affected by Ca⁺⁺, but divalent metal ions such as Zn⁺⁺ inhibited the lysophospholipase activity. Cholesterol but not cholesteryl esters elicited a biphasic effect on both enzymes, stimulating at low concentration but inhibiting at a cholesterol to lyso PC ratio greater than 1. Serum albumin inhibited the lysophospholipase but gave a small biphasic effect to the acyltransferase.     

空间桁架结构拓扑优化设计的线性规划方法

本文以杆件内力为设计变量,构造了多工况作用下空间桁架结构拓扑优化的线性规划模型,考虑了应力和位移约束,能够避免奇异最优拓扑和不稳定结构的产生。     

一机多控视频点播系统

介绍一种自行设计、开发的一机多控视频点播系统，讲述了系统组成及设计方案，它具有服务功能多，操作方便、性能价格比高等特点。