DS-CDMA reverse link channel assignment based on interferencemeasurements

The authors propose a DS-CDMA reverse link channel assignment algorithm based on received interference. A new channel is assigned if the required power is less than the `current interference margin'. The proposed algorithm is adaptable to dynamically changing environments with the capability of assigning more channels than conventional channel assignment methods in nonhomogeneous traffic loads and path loss changes     

Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

Delocalized Electron Accumulation at Nanorod Tips: Origin of Efficient H2 Generation

Photocatalytic hydrogen (H₂) evolution requires efficient electron transfer to catalytically active sites in competition with charge recombination. Thus, controlling charge‐carrier dynamics in the photocatalytic H₂ evolution process is essential for optimized photocatalyst nanostructures. Here, the efficient delocalization of electrons is demonstrated in a heterostructure consisting of optimized MoS₂ tips and CdS nanorods (M‐t‐CdS Nrs) synthesized by amine‐assisted oriented attachment. The heterostructure achieves photocatalytic H₂ activity of 8.44 mmol h^?1 g^?1 with excellent long‐term durability (>23 h) without additional passivation under simulated solar light (AM 1.5, 100 mW cm^?2). This activity is nearly two orders of magnitude higher than that of pure CdS Nrs. The impressive photocatalytic H₂ activity of M‐t‐CdS Nrs reflects favorable charge‐carrier dynamics, as determined by steady‐state PL and time‐correlated single photon counting correlation analysis at low temperature. The MoS₂ cocatalysts precisely located at the end of the CdS Nrs exhibit ultrafast charge transfer and slow charge recombination via spatially localized deeper energy states, resulting in a highly efficient H₂ evolution reaction in lactic acid containing an electrolyte.     

Effective Polysulfide Rejection by Dipole‐Aligned BaTiO3 Coated Separator in Lithium–Sulfur Batteries

Although the exceptional theoretical specific capacity (1672 mAh g^?1) of elemental sulfur makes lithium–sulfur (Li–S) batteries attractive for upcoming rechargeable battery applications (e.g., electrical vehicles, drones, unmanned aerial vehicles, etc.), insufficient cycle lives of Li–S cells leave a substantial gap before their wide penetration into commercial markets. Among the key features that affect the cyclability, the shuttling process involving polysulfides (PS) dissolution is most fatal. In an effort to suppress this chronic PS shuttling, herein, a separator coated with poled BaTiO₃ or BTO particles is introduced. Permanent dipoles that are formed in the BTO particles upon the application of an electric field can effectively reject PS from passing through the separator via electrostatic repulsion, resulting in significantly improved cyclability, even when a simple mixture of elemental sulfur and conductive carbon is used as a sulfur cathode. The coating of BTO particles also considerably suppresses thermal shrinkage of the poly(ethylene) separator at high temperatures and thus enhances the safety of the cell adopting the given separator. The incorporation of poled particles can be universally applied to a wide range of rechargeable batteries (i.e., metal‐air batteries) that suffer from cross‐contamination of charged species between both electrodes.     

S/W Based Frame‐Level Synchronization for Irregular Screen Processing System

A multi‐screen environment provides a new opportunity for digital signage applications, where various irregularly shaped screens are employed as an effective means for advertisements and information. A formation method applicable to numerous irregularly shaped screens is proposed to provide a new perspective on digital signage applications. The crucial part of the proposed method comes from the geometric sensing of each screen and the formation of a virtual screen where geometrically aligned content extraction and encoding are employed for content transmission to each screen. In addition, a software‐based synchronization method for the proposed system is proposed to address the frame‐level synchronization between screens. The experimental results of the proposed method show an improved performance of the frame‐level synchronization, where the inconsistency between frames is not identified.     

Design issues and performance analysis for DSR routing with reclaim‐based caching in MANETs

Mobile ad hoc networks (MANETs) have been positioned as one of the most important emerging wireless communication scenarios. Temporally formed by a collection of wireless mobile hosts, a MANET does not require the aid of any centralized administration. From this stems a suite of challenges in achieving an efficient MANET routing and content delivery in order to make the best use of precious resources and reduce the routing overhead at each MANET host. One of the reported approaches for solving the issue is the use of caching, which is expected to minimize the routing overhead by taking advantage of the limited memory at each mobile host. This paper introduces a novel scheme for addressing the above issue, called Reclaim‐Based Caching (RBC) policy, which dynamically utilizes a cache replacement mechanism of reclaiming stale routes to efficiently verify and validate a recoverable caching mechanism in Dynamic Source Routing. The main design purposes of RBC are to reduce the routing control overhead, lower the end‐to‐end routing delay, enhance the packet delivery ratio, and obtain a higher throughput for improving routing performance and accelerating the Route Discovery process due to low temporary link failure and high cache utilization. Hence, we can gather all feasible and historical route information into the cache library to be reclaimed as a threshold of efficient routing control. Consequently, the proposed RBC of this paper can be used in the universal wireless network environment to achieve better routing performance and to provide a more flexible real‐time application. Copyright © 2009 John Wiley & Sons, Ltd.     

Scalable and efficient approach for secure group communication using proxy cryptography

Multicast is a scalable solution for group communications. In order to offer security for multicast applications, a group key has to be changed whenever a member joins or leaves the group. This incurs 1-affects-n problem, which is a constraint on scalability. Decentralized approaches solve the scalability problem by dividing a group into several subgroups that use independent group keys. These approaches, however, introduce new challenges: problem of trusting third party and inefficiency of data delivery. Proxy encryption is a good approach to solve the problem of trusting third party. In this paper, we propose a novel secure multicast scheme using the proxy cryptography. The proposed scheme provides not only scalability but also data transmission efficiency by dynamic subgrouping of group members while intermediate data-relaying third parties are not required to be trusted.     

Writing current reduction and total set resistance analysis in PRAM

We evaluated the limit of scaling bottom electrode contact (BEC) heater size and high resistivity heater to reduce writing current. It was found that the resistivity of heater should be increased for reducing writing current below the heater size of about 50 nm without any undesirable increase of resistance of the crystalline state (SET state, Rset). It was shown in the numerical simulations that the dissipated heat loss through BEC during melting GST was decreased in the increase of resistivity of heater. In addition, we analyzed the resistance components contributing to the total set resistance. It was observed that the undesired sharp increase of Rset as the BEC size decreases below 50 nm was attributed to the resistance component of GST–BEC interface. In the case of high resistivity heater, the contributions of both incomplete crystallization and heater itself were enhanced.     

A Multi‐Functional Highly Efficient Upconversion Luminescent Film with an Array of Dielectric Microbeads Decorated with Metal Nanoparticles

Upconversion nanoparticles (UCNPs) have been integrated with photonic platforms to overcome the intrinsically low quantum efficiency limit of upconversion luminescence (UCL). However, platforms based on thin films lack transferability and flexibility, which hinders their broader and more practical application. A plasmonic structure is developed that works as a multi‐functional platform for flexible, transparent, and washable near‐infrared (NIR)‐to‐visible UCL films with ultra‐strong UCL intensity. The platform consists of dielectric microbeads decorated with plasmonic metal nanoparticles on an insulator/metal substrate. Distinct improvements in NIR confinement, visible light extraction, and boosted plasmonic effects for upconversion are observed. With weak NIR excitation, the UCL intensity is higher by three orders of magnitude relative to the reference platform. When the microbeads are organized in a square lattice array, the functionality of the platform can be expanded to wearable and washable UCL films. The platform can be transferred to transparent, flexible, and foldable films and still emit strong UCL with a wide viewing angle.