Catalytic Partial Oxidation of Biomass/Oil Mixture

Investigation was focussed to application of waste POX （partial oxidation）, e.g., meal rape in form of suspension in high boiling hydrocarbons from crude oil distillation. There is an opportunity for utilization of biomass waste resulted from fuels bio-components production. A decrease of oxygen and water steam demand in feed for POX process was observed in this variant. Catalytic effect of iron nanoparticles or nickel nitrate as catalysts in improvement of the pilot plant biomass/oil partial oxidation was investigated as well. Presence of catalyst in the feed supports formation of carbon monoxide and suppression content of methane in the gas product. Experimental data were well compared with process simulation based on eauilibrium reactor model.     

Empirical evaluation of a calibration chart detector

In this paper, we systematically assess the performance of an automatic calibration chart detector. Through simulation we establish the optimal set of control parameters and the rate of successful detection as a function of pose. We validate the simulation results on real images taken from a camera mounted on a robot arm. The results confirm the utility of such simulation studies. The feedback obtained suggested a number of modifications for the chart detection system, which led to a significant improvement in performance. In particular, the chart design was changed to accommodate wider range and better stability in detection. Received: 16 December 1999 / Accepted: 15 October 2000     

Optical properties of PMMA doped with erbium(III) and ytterbium(III) complexes

In this article, we report the fabrication and optical/spectroscopic properties of polymethylmethacrylate (PMMA) doped with rare earth (RE) (Er³⁺ and Er³⁺/Yb³⁺) ions. Infrared spectroscopy revealed only very weak O? H stretching vibration peaks in the samples, which is important if satisfactory photoluminescence is to be observed at 1530 nm. Measurement of transmission spectra in the wavelength ranges from 300 to 700 nm for Er³⁺‐doped samples and from 900 to 1050 nm for Yb³⁺‐doped samples enabled us to observe the ⁴G_11/2 (377 nm) and ²H_11/2 (519 nm) transmission bands typical for Er³⁺‐doped samples, as well as the ²F_5/2 (975 nm) band typical for Yb³⁺‐doped samples. Under excitation at 980 nm, at room temperature, the characteristic Er³⁺ emission at 1530 nm was also observed with improving trend when the higher RE concentrations were applied. The results indicate that the PMMA reveals very low tendency to the RE clustering, which together with low cost and easy fabrication make it a material with a great potential in the active photonics devices. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Cationization of cellulose fibers for composites

In this work, composites were made by improved bonding of the cationized cellulosic fabric and some anionic matrix like Carboxymethyl Cellulose (CMC). Mercerized cotton fabric was cationized using cationization agent, TEXAMIN ECE with varying percentage from 1 to 10%. Those cationized cotton samples were incorporated in anionic matrices and the resultant composites were tested for mechanical properties on Universal Textile Tensile Testing machine. In the case of CMC as the matrix for the cationized reinforcement, the increasing trend in the tensile strength and elongation at break was observed. Scanning Electron Microscope images showed no extraordinary changes in the physical appearance of the cationized samples. Thermograms derived from Differential Scanning Calorimetry were informative for the evaluation of the thermal behavior of composites.     

Growth and Potential Damage of Human Bone-Derived Cells on Fresh and Aged Fullerene C60 Films

Fullerenes are nanoparticles composed of carbon atoms arranged in a spherical hollow cage-like structure. Numerous studies have evaluated the therapeutic potential of fullerene derivates against oxidative stress-associated conditions, including the prevention or treatment of arthritis. On the other hand, fullerenes are not only able to quench, but also to generate harmful reactive oxygen species. The reactivity of fullerenes may change in time due to the oxidation and polymerization of fullerenes in an air atmosphere. In this study, we therefore tested the dependence between the age of fullerene films (from one week to one year) and the proliferation, viability and metabolic activity of human osteosarcoma cells (lines MG-63 and U-2 OS). We also monitored potential membrane and DNA damage and morphological changes of the cells. After seven days of cultivation, we did not observe any cytotoxic morphological changes, such as enlarged cells or cytosolic vacuole formation. Furthermore, there was no increased level of DNA damage. The increasing age of the fullerene films did not cause enhancement of cytotoxicity. On the contrary, it resulted in an improvement in the properties of these materials, which are more suitable for cell cultivation. Therefore, fullerene films could be considered as a promising material with potential use as a bioactive coating of cell carriers for bone tissue engineering.     

ExPlanTech: Applying multi-agent systems in production planning

This paper presents work carried out within the 'ExPlanTech' project (IST-1999-20171) funded in part by the European Commission's Information Technologies Programme. The mission of the ExPlanTech technology transfer project is to introduce, customize and exploit the multi-agent production planning technology (ProPlanT multi-agent system research prototype) in two specific industrial enterprises. An agent-driven service negotiations and decision process, based on usagecentred knowledge about task requirements, substitutes the traditional production planning activity. We introduce a methodology for integration of the projectdriven production planning based on agent-based engineering within the existing enterprise resource planning system. This novel production planning technology will facilitate optimization of resource utilization and supplier chain while meeting the customer demands. This paper describes a FIPA-compliant implementation of the ExPlanTech technology at the LIAZ Pattern Shop manufacturing company. We describe the structure of the agent community, types of agents, implementation of the planning strategy and its incorporation within the real production environment.     

EQUILIBRIUM MOISTURE CONTENT OF DRIED BLOOD FLOUR FN THE TEMPERATURE RANGE OF 20 - 50°C

The paper presents results of water sorption tests of dried blood flour carried out tinder laboratory conditions and mathematical analyses of sorption isotherms obtained. Moisture equilibrium data were investigated at air temperatures in the range of 20-50°C and water activity ranging from 0 4 to 0 99. The experimental procedure used was a gravimetric dynamic method with continuous registration of sample weight changes. Sorption capacity decreases as temperature increases. Rehydration of the dried material results in hysteresis but this phenomenon was small. Four models of equilibrium moisture content/equilibrium relative air humidity (Chung—Pfost. Halsey. Henderson, and Oswin) were evaluated for their ability to fit data for the samples of dried blood. The modified Henderson equation was a good model for moisture adsorption and desorption of dried blood flour     

Semiconducting to metallic-like boron doping of nanocrystalline diamond films and its effect on osteoblastic cells

The impact of boron doping level of nanocrystalline diamond (NCD) films on the character of cell growth (i.e., adhesion, proliferation and differentiation) is presented. Intrinsic and boron-doped NCD films were grown on Si/SiO₂ substrates by microwave plasma CVD process. The boron-doped samples were grown by adding trimethylboron (TMB) to the gas mixture of methane and hydrogen. Highly resistive (0 ppm), semiconducting (133 or 1000 ppm), and metallic-like (6700 ppm) NCD films were tested as the artificial substrates for the cultivation of osteoblast-like MG 63 cells. The conductivity and surface charge increased monotonically with the increasing boron content. All NCD substrates showed good biocompatibility and stimulated the adhesion and growth of MG 63 cells. Higher osteocalcin concentration (by more than 30%) for the cells growing on 1000 and 6700 ppm boron-doped NCD films was found which indicates an enhancement in the cell growth biochemistry.     

Consolidation of nanoparticle suspensions by centrifugation in non-porous moulds

Alumina and zirconia nanosuspensions with a mean particle size of 100 nm and 15 nm, respectively, were consolidated by centrifugal compaction in non-porous moulds. The nanosuspensions consolidated by high-speed centrifugation were deposited irregularly, resulting in a powder deposit with density profile. The homogeneity of the powder deposits was described and homogeneous and well packed deposit regions were identified. Plate-like bodies were prepared from the homogeneous regions of the deposit. The advantage of regular and dense nanoparticle packing by centrifugal compaction was demonstrated by fabricating transparent alumina and tetragonal zirconia ceramics. The transparent alumina had an in-line transmission of 55% in the visible light at a thickness of 0.8 mm. The transparent tetragonal zirconia reached a dense microstructure with an average grain size of 65 nm and an in-line transmission of 25% at a thickness of 0.5 mm.