Remote sensing of vegetation and land-cover change in Arctic Tundra Ecosystems

The objective of this paper is to review research conducted over the past decade on the application of multi-temporal remote sensing for monitoring changes of Arctic tundra lands. Emphasis is placed on results from the National Science Foundation Land-Air-Ice Interactions (LAII) program and on optical remote sensing techniques. Case studies demonstrate that ground-level sensors on stationary or moving track platforms and wide-swath imaging sensors on polar orbiting satellites are particularly useful for capturing optical remote sensing data at sufficient frequency to study tundra vegetation dynamics and changes for the cloud prone Arctic. Less frequent imaging with high spatial resolution instruments on aircraft and lower orbiting satellites enable more detailed analyses of land cover change and calibration/validation of coarser resolution observations.The strongest signals of ecosystem change detected thus far appear to correspond to expansion of tundra shrubs and changes in the amount and extent of thaw lakes and ponds. Changes in shrub cover and extent have been documented by modern repeat imaging that matches archived historical aerial photography. NOAA Advanced Very High Resolution Radiometer (AVHRR) time series provide a 20-year record for determining changes in greenness that relates to photosynthetic activity, net primary production, and growing season length. The strong contrast between land materials and surface waters enables changes in lake and pond extent to be readily measured and monitored.     

Chemical doping and improved flux pinning in Hg-based superconductors

Chemical doping of a small amount (0.020.3) of rhenium (Re) ion into HgBa₂Ca_n–1Cu_nO_y(n=14) has been studied. The flux pinning strength in these Hg-based superconductors is significantly enhanced compared to the undoped parent materials. Neutron diffraction analysis of representative samples (n=3) revealed that Re partially substitutes the Hg-site with octahedrally fully coordinated oxygen atoms, giving rise to the stabilization of Hg(Re)O layer and reduction of this blocking layer thickness. Associated with the expected hybridization of Re-5d and O-2p orbitals and possible metallization of the Hg(Re)O layer, the improved flux pinning behavior is considered to be caused by the decrease of the electromagnetic anisotropy and the enhanced interlayer superconducting coupling strength.     

Evaluation of thermal spike due to exothermic reaction in curing process of carbon fiber-reinforced plastic pressure accumulators for hydrogen stations

In the curing process of fiber-reinforced plastic accumulators, a thermal spike appears due to the exothermic reaction of the resin. It is necessary to accurately evaluate this thermal spike to guarantee quality and avoid using a trial and error approach to control the temperature. Thus, we developed a curing process simulator that is able to accurately evaluate the thermal spike of the thermosetting resin. A simplified mesoscale finite element model with the definite separation of fiber and resin is used in the simulation. In this study, the newly developed simulation system was examined by comparing its results with the experimental results from the curing process of fiber-reinforced plastic accumulators.     

Readout characteristics of flexible monolithic optical head slider combined with visible laser light guide

Optical near-field recording is a candidate technology for overcoming the diffraction limit of conventional optical recording. In our previous work, we proposed a novel optical head slider for near-field recording that we call a flexible optical head slider. An air-bearing pad pattern is formed on the apex of a cantilever-like polymeric waveguide so that, by using the cantilever itself as the slider suspension, a single body structure incorporates the functions of the flying slider, suspension, and waveguide. This structure can be expected to provide several important advantages by miniaturizing head assemblies; simplifying the assembly and optical trimming processes; and producing a lighter head, thus allowing a wider tracking bandwidth. In this paper, we report the read-out signal evaluation of the flexible optical head slider. Using a slider with a sub-micron sized aperture, read-out of a test metal-patterned ROM (Read Only Memory) disk was successfully demonstrated down to a 0.2 μm linewidth line and space pattern.     

Numerical simulation of deflecting flow in a symmetric enlarged channel

Numerical results of three-dimensional separated flow and heat transfer in a rectangular channel with a suddenexpansion are presented in this paper.Numerical simulations of Navier-Stokes and energy equations are carriedout using the finite difference method.The results of three-dimensional calculations are compared with thetwo-dimensional ones,and effects of the aspect ratio of channel upon the flow are shown.The transition fromsymmetric to asymmetric flow appears at lower Reynolds number as increasing the aspect ratio.The details oflocal heat transfer characteristics in two different separated flow regions on two downstream walls are clarified.Two-dimensionality of the flow and heat transfer almost disappears for the aspect ratio considered.     

Friction Powder Compaction for Fabrication of Open-Cell Aluminum Foam by the Sintering and Dissolution Process Route

A new friction powder compaction (FPC) process by the sintering and dissolution process (SDP) route for fabricating open-cell aluminum (Al) foam, which requires no external heat sources, was developed. Foams with porosities of 74 and 83 pct were successfully fabricated and their compressive responses were investigated. The sintered mixture during the removal process was observed nondestructively by X-ray computed tomography (CT) to reveal the progress of the removal of soluble particles and to confirm that they were completely dissolved.     

Calderon's preconditioning for periodic fast multipole method for elastodynamics in 3D

Preconditioning methods based on Calderon's formulae for the periodic fast multipole method for elastodynamics in 3D are investigated. Three different types of formulations are proposed. The first type is a preconditioning just by appropriately ordering the coefficient matrix without multiplying preconditioners. The other two types utilise preconditioners constructed using matrices needed in the main fast multipole method algorithms. We make several numerical experiments with proposed preconditioners to confirm the efficiency of these proposed methods. We also conclude that the preconditioning of the first type is faster with respect to the computational time than other preconditioning methods discussed in this article. Copyright © 2012 John Wiley & Sons, Ltd.     

Chiral selection in supercoiling and wrapping of DNA

This paper gives an account of our recent studies on the mechanisms for chiral selection in super-coiling and wrapping of DNA. We first present a compact model of double-stranded DNA (Model 1), which consists of two elastic chains that mutually intertwine in a right-handed manner to form a double-stranded helix. Numerical analysis of this model suggests an intrinsic propensity of DNA to writhe in the left direction upon bending. Based on this asymmetric elasticity of DNA, we present a further simplified model of DNA (Model 2), which is a single-chained homopolymer with the propensity to writhe in the left direction upon bending. This simplified model is incorporated into a Langevin dynamics study to explore the origin of the uniform left-handed wrapping of DNA around a nucleosome core particle in nature. We finally show that the propensity of DNA to writhe in the left direction upon bending gives rise to the selective left-handed wrapping, provided that the size of the core particle is appropriate. This result suggests the fundamental significance of the asymmetric elasticity of helical biopolymers in their structural dynamics and functions.