Solar selective absorbers based on two-dimensional W surface gratings with submicron periods for high-temperature photothermal conversion

Spectral properties and thermal stability of two-dimensional (2D) W surface gratings with submicron periodicity are investigated to develop solar selective absorbers for high-temperature applications. Numerical calculations based on the rigorous coupled-wave analysis technique have been performed for simulating the spectral properties of W gratings. The results indicate that the gratings with microcavities have a good spectral selectivity suited for high-temperature applications, while the gratings with micropyramids realize a high solar absorptance over 0.92. 2D surface gratings with submicron holes have been fabricated on W substrates by the fast atom beam etching with highly ordered porous alumina masks. They have shown good spectral selectivity and sufficient thermal stability at 1170 K under a vacuum atmosphere. The observed absorption band is considered to originate from the standing wave resonance between the electromagnetic fields and the standing wave mode generated inside the holes.     

Monitoring of the multiple bacteriocin production by Enterococcus faecium NKR-5-3 through a developed liquid chromatography and mass spectrometry-based quantification system

Enterococcus faecium NKR-5-3 produces four antimicrobial peptides referred here as enterocins NKR-5-3A, B, C and D. A two-step electrospray ionization-liquid chromatography and mass spectrometry (ESI-LC/MS)-based quantification system was developed to monitor its multiple bacteriocin production profiles, which is essential in understanding the complex production regulation mechanism of strain NKR-5-3. The developed ESI-LC/MS-based quantification system can easily monitor the multiple bacteriocin production of this strain. Using the developed system, the production of enterocin NKR-5-3B was found to be not as variable as those of the other enterocins in different cultivation media. Production of enterocin NKR-5-3B was also found to have a wider optimum incubation temperature (20-30°C) than enterocins NKR-5-3A, C and D (25°C). Furthermore, at least 2?nM of the bacteriocin-like inducing peptide, enterocin NKR-5-3D, regulated the production of NKR-5-3 enterocins except enterocin NKR-5-3B. These findings taken together suggest that enterocin NKR-5-3B has an independent production regulation mechanism from the other NKR-5-3 enterocins. The developed system could effectively pin-point the production profiles of the multiple bacteriocins of E.?faecium NKR-5-3 under different fermentation conditions.     

Production of dipeptidyl peptidase IV inhibitory peptides from defatted rice bran

The insulinotropic hormone glucagon-like peptide-1 is metabolised extremely rapidly by the ubiquitous enzyme dipeptidyl peptidase IV (DPP-IV). Therefore, human DPP-IV is a key regulator involved in the prevention and treatment of type 2 diabetes. To simplify the method of producing an inhibitory peptide against DPP-IV, we focused on rice bran (RB) as a source and subjected proteins from defatted RB to enzymatic proteolysis using 2 commercial enzymes. The RB peptides produced with Umamizyme G exhibited 10 times the inhibitory activity as those produced with Bioprase SP. The half-maximal inhibitory concentration (IC₅₀) value of the RB peptides was 2.3 ± 0.1 mg/ml. Leu-Pro and Ile-Pro were identified as the inhibitory peptides among the RB peptides produced with Umamizyme G. Ile-Pro was the strongest DPP-IV inhibitor among the 15 Xaa-Pro dipeptides and Pro-Ile tested. Ile-Pro competitively inhibited DPP-IV (K_i = 0.11 mM). Mass spectrometry indicated that the contents of Leu-Pro and Ile-Pro in the RB peptides were 2.91 ± 0.52 μg/mg.     

Studies on the Dehydrogenative Polymerizations of Monolignol β‐Glycosides. Part 1. Syntheses of Monolignol β‐glycosides, (E)‐Isoconiferin, (E)‐Isosyringin,and (E)‐Triandrin

Abstract

(E)‐4‐O‐Acetyl coniferyl alcohol was synthesized by the reduction of (E)‐4‐O‐acetyl ferulic acid with sodium borohydride and N,N‐dimethylchloromethylenium chloride in 80.2% yield. The glycosylation of (E)‐4‐O‐acetyl coniferyl alcohol with trichloroacetimidoyl 2,3,4,6‐tetra‐O‐pivaloyl‐α‐D‐glucopyranoside in the presence of BF₃-Et₂O in anhydrous CH₂Cl₂, followed by deacylation gave (E)‐isoconiferin in high yield. This synthetic method could be applied to the syntheses of other monolignol β‐glycosides. As a result, (E)‐isoconiferin, (E)‐isosyringin, and (E)‐triandrin were synthesized from vanillin, syringaldehyde, and p‐hydroxybenzaldehyde, respectively, by five reaction steps in high overall yield.     

Site-Specific Fracture Healing: Comparison between Diaphysis and Metaphysis in the Mouse Long Bone

The process of fracture healing varies depending upon internal and external factors, such as the fracture site, mode of injury, and mechanical environment. This review focuses on site-specific fracture healing, particularly diaphyseal and metaphyseal healing in mouse long bones. Diaphyseal fractures heal by forming the periosteal and medullary callus, whereas metaphyseal fractures heal by forming the medullary callus. Bone healing in ovariectomized mice is accompanied by a decrease in the medullary callus formation both in the diaphysis and metaphysis. Administration of estrogen after fracture significantly recovers the decrease in diaphyseal healing but fails to recover the metaphyseal healing. Thus, the two bones show different osteogenic potentials after fracture in ovariectomized mice. This difference may be attributed to the heterogeneity of the skeletal stem cells (SSCs)/osteoblast progenitors of the two bones. The Hox genes that specify the patterning of the mammalian skeleton during embryogenesis are upregulated during the diaphyseal healing. Hox genes positively regulate the differentiation of osteoblasts from SSCs in vitro. During bone grafting, the SSCs in the donor’s bone express Hox with adaptability in the heterologous bone. These novel functions of the Hox genes are discussed herein with reference to the site-specificity of fracture healing.     

Spatial ordering of self-organized InGaAs/AlGaAs quantum disks on GaAs (311)B substrates

We report the control of self-organization of In_xGa_1−xAs/AlGaAs quantum disks on GaAs (311)B surfaces using a novel technique based upon lithography-defined SiN dot arrays. A strained InGaAs island array selectively grown using the SiN dots provides periodic strain field. When the pitch of lateral ordering corresponds with the period of the strain field, self-organized quantum disks stacked on the InGaAs islands are precisely arranged just as the buried SiN dot array. The spacing of the array element is 250–300 nm (x = 0.3) and around 150 nm (x = 0.4). Vertical alignment by strain is achieved at a very thick (95 nm) separating layer. Characterization using atomic force microscopy reveals the size-fluctuation of disk is dramatically improved with spatial ordering.     

Solution‐processed organic TFT array for active‐matrix LCDs on a plastic substrate

Abstract— Organic TFTs (OTFTs) have been developed with a novel solution‐processed gate insulator of poly(4‐vinylphenol) (PVP) with the addition of octadecyltrichloro‐silane (OTS) and a solution‐processed organo‐silver electrode/wire to improve the performance of an OTFT and to maked high‐throughput‐manufacturing process possible. Solution‐processed PVP has also employed for a buffer layer on a plastic substrate. The OTFT backplane with these solution‐based organic‐material technologies has been successfully applied to drive a 2.5‐in. QQVGA (160 × 120 pixels) AMLCD with a resolution of 79 dpi.     

Total sputtering yields of solids under MeV-energy Si ion bombardment

Total sputtering yields have been measured for SiO₂ and Cu targets bombarded with Si ions at an incident energy between 500 keV and 5.0 MeV using a quartz crystal microbalance technique. In order to measure total yields accurately, we have developed a beam modulation technique to avoid the effect of thermal drift. In the MeV energy range, an ion penetrates through thin SiO₂ and Cu targets and is implanted into a quartz crystal. Therefore, the thickness of these layers deposited on quartz crystals was carefully controlled to avoid damage of quartz crystal by incident ions. As a result, total sputtering yields of SiO₂ increased with incident Si ion energy, while those of the Cu target decreased. The total yields of the SiO₂ target were represented well by a power low of the electronic stopping power.     

纺丝及纤维成形的机理(Ⅵ)

本文依据前报阐述的数学模拟法的基础方程式和解析方法,系统地讨论了在不同泵供量和纺丝速度的情况下,沿纺丝线的丝条温度和固化点的变化,以及沿纺丝线聚合物的纵向运动速度梯度、纤维的细化过程、纺丝张力和纺丝应力的分布,并对与以上有关的主要参数进行了列表归纳。