Magnetic properties of the solid solutions,YxDy1−xC2

Magnetic properties of the solid solutions, Y_xDy_1?xC₂, were investigated. All of them exhibit?d antiferromagnetic behavior. The values of the Neel temperature and the paramagnetic Curie temperature were plotted linearly against the de Gennes factor, (g?1)²J(J+1). This result was discussed in terms of the Ruderman-Kittel- Kasuya-Yosida theory.     

In vivo absorption of porous apatite- and wollastonite-containing glass-ceramic

The behavior of porous apatite- and wollastonite-containing glass-ceramic (AW) in the bone marrow cavity was investigated. Cylinders of porous AW (4 mm in diameter and 20 mm long, mean porosity of 70% and mean pore diameter of 200 microm) were implanted into the bone marrow cavity of rabbit femurs, and analyzed by chronological radiograms and by scanning electron microscopy one, three, six, and 12 months later. The pores of porous AW are interconnected and homogeneously distributed, and its compressive strength is nearly equal to that of human cancellous bone. Bone formed in the pores at the center of the material by one month and bonded to the material directly. The volume of newly formed bone in the material pores reached a peak at three months, and decreased gradually after six months. The trabecular structures of AW were gradually remodeled by newly formed bone, while AW-bone bonding was maintained during bone remodeling and material absorption. AW was absorbed continuously, and at six and 12 months the residual material corresponded to about 64 and 30% of the starting material, respectively. Porous AW may therefore be useful as an absorbable bone substitute.     

Anisotropic multi-step etching for large-area fabrication of surface microstructures on stainless steel to control thermal radiation

Controlling the thermal radiation spectra of materials is one of the promising ways to advance energy system efficiency. It is well known that the thermal radiation spectrum can be controlled through the introduction of periodic surface microstructures. Herein, a method for the large-area fabrication of periodic microstructures based on multi-step wet etching is described. The method consists of three main steps, i.e., resist mask fabrication via photolithography, electrochemical wet etching, and side wall protection. Using this method, high-aspect micro-holes (0.82 aspect ratio) arrayed with hexagonal symmetry were fabricated on a stainless steel substrate. The conventional wet etching process method typically provides an aspect ratio of 0.3. The optical absorption peak attributed to the fabricated micro-hole array appeared at 0.8 μm, and the peak absorbance exceeded 0.8 for the micro-holes with a 0.82 aspect ratio. While argon plasma etching in a vacuum chamber was used in the present study for the formation of the protective layer, atmospheric plasma etching should be possible and will expand the applicability of this new method for the large-area fabrication of high-aspect materials.     

16S rRNA pyrosequencing-based investigation of the bacterial community in nukadoko, a pickling bed of fermented rice bran

Nukadoko is a naturally fermented rice bran mash traditionally used for pickling vegetables in Japan; its refreshment and fermentation cycles sometimes continue for many years. Here, we investigated the structure and dynamics of the bacterial community in nukadoko by conducting pyrosequencing and quantitative polymerase chain reaction (PCR) analyses of 16S ribosomal RNA genes (rDNA). Of the 16 different samples studied, 13 showed Lactobacillus-dominated microbiota, suggesting that aged nukadoko samples tend to realize a niche, favorable Lactobacillus species. The lactic acid bacterial community of each of the 16 samples was classified into 3 types according to the presence or absence of 2 predominant species, Lactobacillus namurensis and Lactobacillus acetotolerans. The dynamics of the bacterial community during fermentation and the subsequent ripening process were examined using a laboratory model of nukadoko inoculated with an aged nukadoko sample (inoculated model). Lb. namurensis grew rapidly in the first 2 days, accompanied with a rapid decrease in pH and an increase in lactate levels, while Lb. acetotolerans grew with a longer doubling time and slow acidification during the 20 days after inoculation. On the other hand, spontaneous fermentation of the nukadoko model prepared from fresh rice bran without the nukadoko inoculation (inoculant-free model), showed the growth of some non-Lactobacillus species such as staphylococci and bacilli within the first 10 days; thereafter, Lb. namurensis was dominant, while Lb. acetotolerans was not detected during the 20-day experimental period. These results suggest that the naturally established Lactobacillus community in aged nukadoko is effectively involved in the biocontrol of the microbial community of nukadoko during the refreshment and fermentation cycles.     

Evaluation of hydrogen-assisted cracking behavior of low-alloy steel in the range 95 °C to 350 °C

In this report, hydrogen-assisted cracking (HAC) behavior of low-alloy steel was evaluated using a constant elongation rate tensile test, and the temperature and crack tip strain rate effects were observed. It was found that temperature dependence of the threshold condition (C _σm ^c ) of HAC above about 100 °C followed the relation C _σm ^c = Kexp(−41,300/Rr) whereK is a constant andT is absolute temperature. The relationship between HAC growth rate and crack tip strain rate was established as almost linear, irrespective of temperature and hydrogen concentration at the crack tip. Hydrogen heat release tests were also performed. From these tests, formation and growth of microcracks which are trap sites of hydrogen were thought to be the mechanism of HAC in the steel. From this mechanism, HAC behavior of the low-alloy steel could be qualitatively explained.