Effects of ozonized water and heat treatment on the papaya fruit epidermis

This study examined the effects of O₃ and hot water treatments on the epidermis of Golden papaya fruit. Heat treatments were applied in a hot water brushing (HWB) system. Papayas were brushed under a pressurized hot water rinse stage at 45, 55 and 65 °C for 60 s. In the HWB treatment, 4 ppm ozone was applied to the papayas for 1 or 2 min. The results show that ozone applications did not affect the fruit's cuticular surface, while heat treatments allowed natural fissures on the fruit epidermis to recover. Several crystalloid forms were identified on the epidermis of the papayas after the heat treatments. The predominant crystalloid forms on papayas are tubular and there is a positive response to temperature; the higher the temperature, the larger and more frequent the tubular crystalloids.     

Preparation of polypropylene‐based nanocomposites using nanosized MCM‐41 as support and in situ polymerization

MCM‐41 nanoparticles were used for preparing nanocomposites through the in situ polymerization of propylene. The performance of the catalytic system and the final properties of the materials obtained are highly dependent on the methodology used for impregnation of the catalyst onto the support particles, and therefore an optimization study for the impregnation methodology of the catalyst (Me₂Si(Ind)₂ZrCl₂) was carried out. Two different methodologies were used; the results in terms of catalytic activity and polymer molecular masses indicated that the most promising one involved the pre‐activation of the catalyst with the cocatalyst, methylaluminoxane, followed by impregnation onto the MCM‐41 nanoparticles. Thus, an optimized route for the preparation of polypropylene nanocomposites achieving significant improvements in catalyst activity was developed. The nanocomposite materials were characterized by GPC, TGA and DSC. The dispersion state and the size of the nanoparticles incorporated in the polypropylene matrix were investigated by transmission electron microcopy. Additionally, this methodology allows simultaneous control of the desired amount of support and the concentration of catalyst to be used in the in situ polymerization. © 2015 Society of Chemical Industry     

A 54.2?μW 5?MSps 9-bit ultra-low energy analog-to-digital converter in 180?nm technology

This paper aims to address the growing need for ultra-low power analog-to-digital converters (ADC). For this purpose, we pushed the limitations of conventional successive approximation register ADCs through the use of deep voltage scaling, a novel iterative precharging scheme, and topological improvements over recent works. From the simulations results we achieve a figure of merit of 31?fJ per conversion step, with an 8.45 effective number of bits, working at 5?MSps.     

Thiophene‐ and silarylene‐containing polyesters. Resonance effect on conductivity after polarization in an external electric field

Polyesters were synthesized by direct polycondensation of thiophene‐2,5‐dicarboxylic acid and five different silarylene‐containing diphenols using a tosyl chloride/pyridine/N,N‐dimethylformamide system as a condensing agent. Polymers were obtained in good yields and were characterized using Fourier transform infrared and NMR (¹H, ¹³C, 135‐DEPT and ²⁹Si) spectroscopy and elemental analysis. All polymers were completely soluble in aprotic organic polar solvents such as dimethylformamide, dimethylsulfoxide and N‐methyl‐2‐pyrrolidone. The range of effective mass of the polymers (m/z) was 1 × 10⁵–2 × 10⁵, determined using electrospray ionization mass spectrometry. Asymmetry and steric hindrance prevented dense packing of the polymeric chains, showing glass transition temperatures between ? 78 and ? 51 °C and loss of thermal stability at 177–199 °C (10% weight loss). Additionally, the melting points of the polyesters were found to be in the range 62–67 °C. Because of this, the samples were semi‐solid at room temperature. The optical band gaps of the polymers were observed between 4.54 and 4.48 eV, corresponding in all cases to insulator behavior. The molecular structure of the samples was studied using X‐ray diffraction, showing a degree of order that was associated with two monoclinic lattices. Additionally, the conductivity was studied using a two‐point method with contacts on top of polymer films. Prior to the electrical measurement, the samples were polarized in an external electric field of 0.8 to 6.4 V cm^?1, and the alignment of the dipoles increased the electrical conductivity. Copyright © 2012 Society of Chemical Industry     

Impact of cycling temperatures on Fusarium verticillioides and Fusarium graminearum growth and mycotoxins production in soybean

BACKGROUND: Fusarium graminearum and F. verticillioides are two very important mycotoxigenic species as they cause diverse diseases in crops. The effects of constant and cycling temperatures on growth and mycotoxin production of these species were studied on soybean based medium and on irradiated soya beans. RESULTS: F. graminearum grew better when was incubated at 15, 20 and 15–20 °C (isothermal or cycling temperature) during 21 days of incubation. Maximum levels of zearalenone and deoxynivalenol (39.25 and 1040.4 µg g^?1, respectively) were detected on soya beans after 15 days of incubation and the optimal temperature for mycotoxin production was 15 °C for zearalenone and 20 °C for deoxynivalenol. F. verticillioides grew better at 25 °C in culture medium and at 15/20 °C and 15/25 °C on soybean seeds. Fumonisin B₁ was produced only in culture medium, and the maximum level (7.38 µg g^?1) was found at 15 °C after 7 days of incubation. CONCLUSION: When growth and mycotoxin production under cycling temperatures were predicted from the results under constant conditions, observed values were different from calculated for both species and substrate medium. Therefore, care should be taken if data at constant temperature conditions are to be extrapolated to real field conditions. Copyright © 2012 Society of Chemical Industry     

The ALTER-NATIVA knowledge management approach

Nowadays, it is commonly known that information systems need an agile capability of handling knowledge. To accomplish this, systems have to have a formal knowledge representation ability supported by specific and advanced reasoning features. This research work proposes a knowledge management approach with the purpose to gather, model and consume community knowledge for specific recommendation commitments. Such approach is accomplished by a semantic lexicon alignment between the various community knowledge assets, to facilitate collaborations establishment between people and systems in an interoperable fashion. Thus, a knowledge base supported by a thesaurus able to represent all the metadata needed to represent and characterize the various community stakeholders’ resources is proposed. The thesaurus represents the lexicon in the domain, which in the ALTER-NATIVA systems is mostly used to support the various e-Learning elements (e.g. courses) and users categorization, sustained by synchronization features to facilitate a constant update of its information. A set of services designed to recommend specific resources in relation to a determined profile of user is provided. Additionally, a discussion about how the ALTER-NATIVA knowledge management approach can be applied to industrial environments is presented.     

Microstructure of Reaction Zone Formed During Diffusion Bonding of TiAl with Ni/Al Multilayer

In this article, the characterization of the interfacial structure of diffusion bonding a TiAl alloy is presented. The joining surfaces were modified by Ni/Al reactive multilayer deposition as an alternative approach to conventional diffusion bonding. TiAl substrates were coated with alternated Ni and Al nanolayers. The nanolayers were deposited by dc magnetron sputtering with 14 nm of period (bilayer thickness). Joining experiments were performed at 900 °C for 30 and 60 min with a pressure of 5 MPa. Cross sections of the joints were prepared for characterization of their interfaces by scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), high resolution TEM (HRTEM), energy dispersive x-ray spectroscopy (EDS), and electron backscatter diffraction (EBSD). Several intermetallic compounds form at the interface, assuring the bonding of the TiAl. The interface can be divided into three distinct zones: zone 1 exhibits elongated nanograins, very small equiaxed grains are observed in zone 2, while zone 3 has larger equiaxed grains. EBSD analysis reveals that zone 1 corresponds to the intermetallic Al₂NiTi and AlNiTi, and zones 2 and 3 to NiAl.     

Molds and Resists Studies for Nanoimprint Lithography of Electrodes in Low-Voltage Polymer Thin-Film Transistors

A low-cost patterning of electrodes was investigated looking forward to replacing conventional photolithography for the processing of low-operating voltage polymeric thin-film transistors. Hard silicon, etched by sulfur hexafluoride and oxygen gas mixture, and flexible polydimethylsiloxane imprinting molds were studied through atomic force microscopy (AFM) and field emission gun scanning electron microscopy. The higher the concentration of oxygen in reactive ion etching, the lower the etch rate, sidewall angle, and surface roughness. A concentration around 30 % at 100 mTorr, 65 W and 70 sccm was demonstrated as adequate for submicrometric channels, presenting a reduced etch rate of 176 nm/min. Imprinting with positive photoresist AZ1518 was compared to negative SU-8 2002 by optical microscopy and AFM. Conformal results were obtained only with the last resist by hot embossing at 120 °C and 1 kgf/cm² for 2 min, followed by a 10 min post-baking at 100 °C. The patterning procedure was applied to define gold source and drain electrodes on oxide-covered substrates to produce bottom-gate bottom-contact transistors. Poly(3-hexylthiophene) (P3HT) devices were processed on high-κ titanium oxynitride (TiO _x N _y ) deposited by radiofrequency magnetron sputtering over indium tin oxide-covered glass to achieve low-voltage operation. Hole mobility on micrometric imprinted channels may approach amorphous silicon (～0.01 cm²/V s) and, since these devices operated at less than 5 V, they are not only suitable for electronic applications but also as sensors in aqueous media.     

Calorimetric Measurements at Low Temperatures in Toluene Glass and Crystal

The specific heat of toluene in glass and crystal states has been measured both at low temperatures down to 1.8 K (using the thermal relaxation method) and in a wide temperature range up to the liquid state (using a quasiadiabatic continuous method). Our measurements therefore extend earlier published data to much lower temperatures, thereby allowing to explore the low-temperature “glassy anomalies” in the case of toluene. Surprisingly, no indication of the existence of tunneling states is found, at least within the temperature range studied. At moderate temperatures, our data either for the glass or for the crystal show good agreement with those found in the literature. Also, we have been able to prepare bulk samples of toluene glass by only doping with 2% mol ethanol instead of with higher impurity doses used by other authors.