Effects of an external electric field on the collection efficiency of air filters: Filtration mechanisms with an external e-field

An external electric field was applied on the filter to improve its collection efficiency, and the collection efficiencies of the different filters under various conditions were evaluated. Dominant electrical filtration mechanisms for each condition were investigated using experimental and theoretical approaches. Four types of air filters were used as test filters: a charged fiber filter, a low-grade filter with 50% collection efficiency in the most penetration particle size (MPPS) zone, and two high-grade filters with more than 95% collection efficiency in the MPPS zone. Three different particle charge states—neutralized, single-charged and uncharged—were considered. For neutralized particles, the external electric field led to a 14.5%p. and 2.5%p. increase in the collection efficiencies of the low-grade filter and charged fiber filter, respectively. With the electric field, the collection efficiency of the low-grade filter increased by 30%p. for single-charged particles. The electric field also affected the collection efficiencies of the charged filter and high-grade filters, but the effect was not significant. For uncharged particles, the electric field did not lead to a remarkable increase in the collection efficiencies of any of the filters. Through experimental and theoretical analysis, it was found that the polarization force imposed on the charged fiber was the dominant factor for the charged fiber filter regardless of application of the external electric field. The Coulombic force imposed on the electric field was the dominant factor for the low-grade filter, while both the Coulombic and the polarization forces affected the collection efficiency of the high-grade filter.

Copyright © 2017 American Association for Aerosol Research     

玻璃纤维增强尼龙66长期老化性能研究

针对玻璃纤维增强尼龙长期耐热老化性影响因素过多、测试结果很难重复的问题,提出利用试验设计技术,设计了一个4因子多水平的试验,因子包括玻璃纤维、基体树脂、试样放置方式和老化时间。发现不同基体树脂、不同的试样放置方式对长期老化具有非常显著的影响。根据实际结果,指出利用旋转试样来消除热老化烘箱中温度不均等因素,可获得具有对比意义的试验数据。     

Total projection to latent structures for process monitoring

Partial least squares or projection to latent structures (PLS) has been used in multivariate statistical process monitoring similar to principal component analysis. Standard PLS often requires many components or latent variables (LVs), which contain variations orthogonal to Y and useless for predicting Y . Further, the X ‐residual of PLS usually has quite large variations, thus is not proper to monitor with the Q‐statistic. To reduce false alarm and missing alarm rates of faults related to Y , a total projection to latent structures (T‐PLS) algorithm is proposed in this article. The new structure divides the X ‐space into four parts instead of two parts in standard PLS. The properties of T‐PLS are studied in detail, including its relationship to the orthogonal PLS. Further study shows the space decomposition on X ‐space induced by T‐PLS. Fault detection policy is developed based on the T‐PLS. Case studies on two simulation examples show the effectiveness of the T‐PLS based fault detection methods. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

Collagen I Modifies Connexin-43 Hemichannel Activity via Integrin α2β1 Binding in TGFβ1-Evoked Renal Tubular Epithelial Cells

Chronic Kidney Disease (CKD) is associated with sustained inflammation and progressive fibrosis, changes that have been linked to altered connexin hemichannel-mediated release of adenosine triphosphate (ATP). Kidney fibrosis develops in response to increased deposition of extracellular matrix (ECM), and up-regulation of collagen I is an early marker of renal disease. With ECM remodeling known to promote a loss of epithelial stability, in the current study we used a clonal human kidney (HK2) model of proximal tubular epithelial cells to determine if collagen I modulates changes in cell function, via connexin-43 (Cx43) hemichannel ATP release. HK2 cells were cultured on collagen I and treated with the beta 1 isoform of the pro-fibrotic cytokine transforming growth factor (TGFβ1) ± the Cx43 mimetic Peptide 5 and/or an anti-integrin α2β1 neutralizing antibody. Phase microscopy and immunocytochemistry observed changes in cell morphology and cytoskeletal reorganization, whilst immunoblotting and ELISA identified changes in protein expression and secretion. Carboxyfluorescein dye uptake and biosensing measured hemichannel activity and ATP release. A Cytoselect extracellular matrix adhesion assay assessed changes in cell-substrate interactions. Collagen I and TGFβ1 synergistically evoked increased hemichannel activity and ATP release. This was paralleled by changes to markers of tubular injury, partly mediated by integrin α2β1/integrin-like kinase signaling. The co-incubation of the hemichannel blocker Peptide 5, reduced collagen I/TGFβ1 induced alterations and inhibited a positive feedforward loop between Cx43/ATP release/collagen I. This study highlights a role for collagen I in regulating connexin-mediated hemichannel activity through integrin α2β1 signaling, ahead of establishing Peptide 5 as a potential intervention.     

Elastic and inelastic analysis for weld failure prediction of two adjacent steel buildings

Two adjacent buildings near the epicenter of the January 17th Northridge earthquake, one with weld fractures and one without weld fractures, are considered in this research. Both buildings are six stories in height, and their primary lateral force resisting system comprises special moment resisting frames above grade. The buildings considered are referred to herein as the East Building and the West Building. Two basic types of computer studies were performed. One was an elastic 3-D analysis using SAP90, and the other an inelastic 2-D analysis using DRAIN-2DX. Three different models were, created for the elastic analysis. Two for the East Building, designated the ‘benchmark model’, and the ‘probable model’, and one for the West Building, designated the ‘West Building model’. Two different models were created for the inelastic analysis only for the East Building, also called the benchmark model and the probable model. The East Building was unoccupied at the time of the earthquake, hence two models were created for this building. The benchmark model is representative of the design state of the building, while the probable model is representative of the state of the building at the time of the earthquake. The West Building, which was fully occupied at the time of the earthquake, was modeled similarly to the benchmark. Elastic and inelastic studies were performed on these models to determine if a correlation exists between analysis and observed behavior. The findings from the analysis showed no damage to the West Building with possible damage to the East Building. This result is corroborated by the damage survey.     

Demonstration of a micro-fabricated hydrogen storage module for micro-power systems

The objective of this work was to demonstrate a micro-fabricated hydrogen storage module for micro-power systems. Hydrogen storage materials were developed as thin-film inks to be compatible with an integrated manufacturing process. Performance and durability of storage modules were evaluated. Further, applications were demonstrated for a nickel-hydrogen battery and a micro-fabricated hydrogen-air PEM fuel cell. The ink making process, in which polymer binders and solvents were added to the palladium-treated alloys, slightly decreased the storage capacities, but had little effect on the activation properties of the treated alloys. After 5000 absorption/desorption cycles under hydrogen, the hydrogen storage capacities of the thin-film inks remained high. Absorption/desorption behavior of the ink was tested in the environment of a new type nickel-hydrogen battery, in which it would in contact with 26 wt% KOH solution, and the ink showed no apparent degradation. Storage modules were successfully used as the hydrogen source for PEM fuel cell.     

Fully Coupled 3-D Conjugate Heat Transfer Algorithm for Borehole Heat Exchanger Performance Prediction

Quantitative three-dimensional prediction of the thermal performance of a vertical borehole heat exchanger (BHE) in a ground-source heat pump installation is sought. As BHE installation exhibits exceptionally disparate characteristic length scales, an alternative formation-fluid-thermal fully coupled algorithm is derived to quickly predict the 3-D temperature distributions. The time scale of the steady prediction is of order minutes. This simulation capability can be readily coupled to long-time (order months) unsteady simulation of an entire wellbore field. Algorithm prediction is validated by comparison with data from an instrumented commercial installation for a unique BHE conduit design, followed by illustrative design optimization or variation assessments.     

Polynomial Neural Network Approach for Prediction of Liquid Holdup in Horizontal Two-Phase Flow

A new polynomial neural network (PNN) model for estimating liquid holdup in horizontal two-phase flow is proposed in this article. The PNN evolutionally synthesize network size, connectivity, processing element types, and coefficients for globally optimized structure through training. The framework is established using 330 data sets from different experimental conditions. This self-organizing approach automatically presents internal relationships among data in the polynomial forms, and enhances data approximation and explanation capabilities of resulting data-based learning models. The comparative studies with experimental correlations and artificial neural network applications reveal that the model exhibits significant improvement in the processing structure, and outperforms previous models in overall accuracy across liquid holdup ranges.     

Wind energy for the 1990s and beyond

Electrical power must be available to the consumer in any amount upon demand. Conventional methods of power generation, such as the burning of fossil fuels, hydroelectric plants, and nuclear power plants, have considerable shortcomings. Governmental regulations have increased in quantity and have raised the already rigid standards of producing electric power without further damage to the environment. Electrical power produced by wind energy conversion systems are undergoing extensive research and revitalization as a viable solution to clean air power generation. The basic challenge to scientists and engineers is to develop wind energy conversion systems that produce adequate amounts of power, but at a cost comparable to present conventional methods. This article discusses the background and impact of the modern wind energy conversion system on future power generation.