Inorganic arsenic in rice bran and its products are an order of magnitude higher than in bulk grain

Rice is more elevated in arsenic than all other grain crops tested to date, with whole grain (brown) rice having higher arsenic levels than polished (white). It is reported here that rice bran, both commercially purchased and specifically milled for this study, have levels of inorganic arsenic, a nonthreshold, class 1 carcinogen, reaching concentrations of approximately 1 mg/kg dry weight, around 10-20 fold higher than concentrations found in bulk grain. Although pure rice bran is used as a health food supplement, perhaps of more concern is rice bran solubles, which are marketed as a superfood and as a supplement to malnourished children in international aid programs. Five rice bran solubles products were tested, sourced from the United States and Japan, and were found to have 0.61-1.9 mg/kg inorganic arsenic. Manufactures recommend approximately 20 g servings of the rice bran solubles per day, which equates to a 0.012-0.038 mg intake of inorganic arsenic. There are no maximum concentration levels (MCLs) set for arsenic or its species in food stuffs. EU and U.S. water regulations, set at 0.01 mg/L total or inorganic arsenic, respectively, are based on the assumption that 1 L of water per day is consumed, i.e., 0.01 mg of arsenic/ day. At the manufacturers recommended rice bran solubles consumption rate, inorganic arsenic intake exceeds 0.01 mg/ day, remembering that rice bran solubles are targeted at malnourished children and that actual risk is based on mg kg(-1) day(-1) intake.     

Coulomb drag between in-plane graphene double ribbons and the impact of the dielectric constant

With recent developments in the search for novel device ideas, understanding electron-electron interaction in low dimensional systems is of particular interest. Coulomb drag measurements can provide critical insights in this context. In this article, we present a novel planar graphene double ribbon structure that shows for the first time that Coulomb drag is observable in two adjacent monolayer ribbons in the same plane at room temperature. Moreover, our planar devices enable experimentally study of the impact of the dielectric constant on Coulomb drag which is difficult to explore in the typically used double layer graphene structures. Our experimental findings indicate in particular that the drag resistance is proportional to the dielectric constant (ε) and does not, as recently reported, show an increasing trend of interaction strength for small ε-values. In fact, we find that the drag resistance follows approximately an ε 1.2-dependence. The exponent of “1.2” is consistent with the theory considering the carrier concentration in our samples, and positions our results in between the weak and strong coupling limits.      

Interaction between struts and swirl flow in gas turbine exhaust diffusers

The increasing use of gas turbines in combined cycle power plants together with the high amount of kinetic energy in modern gas turbine exhaust flows focuses attention on the design of gas turbine diffusers as the connecting part between the Brayton/Joule and the Rankine parts of the combined cycle. A scale model of a typical gas turbine exhaust diffuser is investigated experimentally. The test rig consists of a radial type, variable swirl generator which provides the exhaust flow corresponding to different gas turbine operating conditions. Static pressure measurements are carried out along the outer diffuser walls and along the hub of the annular part and along the centerline of the conical diffuser. Velocity distributions at several axial positions in the annular and conical diffuser have been measured using a Laser Doppler Velocimeter (LDV). Pressure recovery coefficients and velocity profiles are depicted as a function of diffuser length for several combinations of swirl strength, tip flow and strut geometries. The diffuser without struts achieved a higher pressure recovery than the diffuser with struts at all swirl angle settings. The diffuser with cylindrical struts achieved a higher pressure recovery than the diffuser with profiled struts at all swirl angle settings. Inlet flows with swirl angles over 18?affected the pressure recovery negatively for all strut configurations.     

Microstructure–permeability relation of porous β-Si3N4 ceramics

Porous β-Si₃N₄ ceramics with two distinct structures were produced by using two different Si₃N₄ sources to investigate the relationship between microstructure and permeability. Results showed that regardless of pore amount, size of pore channels, shape-distribution of β-Si₃N₄ grains are more effective on permeability of porous Si₃N₄ ceramics. Higher permeability and lower contribution of inertial forces was obtained by microstructure consists of coarse and equiaxed grains even at lower porosity amount. Calculated Forchheimer number (F_o) and measured the local breadth of a pore also supported the effect of microstructure on permeability.     

Ligand-Programmed Consecutive Symmetry Break(s) in Nanoparticle Based Materials Showing Emergent Phenomena: Transitioning from Sixfold to Threefold Symmetry in Anisotropic ZnO Colloids

The central promise of nanoparticle-based materials is that cooperative properties may emerge, when individual quantum dots are positioned on a periodic lattice. Yet, there are only a few papers in the literature reporting such effects. Nevertheless, it is clear that the symmetry of the superlattice is decisive for the desired emergent phenomena. An interesting question is, how the symmetry of the initial monodisperse nanoparticles affects the structure of the colloidal crystal during self-assembly processes. For instance, particles with a hexagonal cross-section demonstrate self-organization, which is very similar to spherical colloids. Likewise, one would also expect that trigonal nanoparticles behave similarly. Unfortunately, it is very hard to obtain monodisperse semiconductor colloids with a trigonal shape, because this requires a symmetry break during morphogenesis of the nanocrystal. While such a symmetry break is known in the literature for structures attached to a solid substrate, herein, colloidal synthesis of trigonal ZnO nanorods is successfully demonstrated, and the mechanism is elucidated via experimental and theoretical methods. 2D-superlattices formed by such particles with trigonal cross-section are compared to hexagonal analogues. It is found that there are distinct differences, which result in important differences in properties such as the formation of voids and also in optical properties.     

Investigation of the calcareous deposits formation controlled by interfacial pH and its effect on the hydrogen entry into AISI 4135 steel in seawater

The influence of interfacial pH between AISI 4135 steel and seawater under different polarization potentials on the formation of calcareous deposits has been studied. An interfacial pH of 9.61 at ?0.9 V vs. SCE using state of the art iridium oxide microelectrode was found to be the critical pH for the precipitation of magnesium hydroxide. Calcareous deposits with a double-layer structure comprising an inner-brucite layer and an outer-aragonite layer were found to form at potentials between ?1.0 V and ?1.2 V vs. SCE. Furthermore, the facilitation of hydrogen permeation into steel induced by the formation of calcareous deposits was verified using the Devanathan-Stachurski electrochemical test. The mechanism of calcareous deposits facilitates hydrogen permeation into steel is related to its inhibition on hydrogen recombination and escape processes.     

Cooperative Switching in Large‐Area Assemblies of Magnetic Janus Particles

Magnetic Janus particles (MJPs) have received considerable attention for their rich assembly behavior and their potential technological role in applications ranging from simple magnetophoretic displays to smart cloaking devices. However, further progress is hampered by the lack of predictive understanding of the cooperative self‐assembly behavior of MJPs and appropriate dynamic control mechanisms. In this paper, a detailed experimental and theoretical investigation into the magnetically directed spatiotemporal self‐assembly and switching of MJPs is presented. For this purpose, a novel type of MJPs with defined hemispherical compartments carrying superparamagnetic iron oxide nanoparticles as well as a novel simulation model to describe their cooperative switching behavior is established. Combination of the theoretical and experimental work culminates in a simple method to direct assemblies of MJPs, even at high particle concentrations. In addition, a magnetophoretic display with switchable MJPs is developed on the basis of the theoretical findings to demonstrate the potential usefulness of controlled large‐area assemblies of magnetic Janus particles.     

Immune-Modulating Drug MP1032 with SARS-CoV-2 Antiviral Activity In Vitro: A potential Multi-Target Approach for Prevention and Early Intervention Treatment of COVID-19

At least since March 2020, the severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) pandemic and the multi-organ coronavirus disease 2019 (COVID-19) are keeping a firm grip on the world. Although most cases are mild, older patients and those with co-morbidities are at increased risk of developing a cytokine storm, characterized by a systemic inflammatory response leading to acute respiratory distress syndrome and organ failure. The present paper focuses on the small molecule MP1032, describes its mode of action, and gives rationale why it is a promising option for the prevention/treatment of the SARS-CoV-2-induced cytokine storm. MP1032 is a phase-pure anhydrous polymorph of 5-amino-2,3-dihydro-1,4-phthalazinedione sodium salt that exhibits good stability and bioavailability. The physiological action of MP1032 is based on a multi-target mechanism including localized, self-limiting reactive oxygen species (ROS) scavenging activities that were demonstrated in a model of lipopolysaccharide (LPS)-induced joint inflammation. Furthermore, its immune-regulatory and PARP-1-modulating properties, coupled with antiviral effects against SARS-CoV-2, have been demonstrated in various cell models. Preclinical efficacy was elucidated in LPS-induced endotoxemia, a model with heightened innate immune responses that shares many similarities to COVID-19. So far, during oral clinical development with three-month daily administrations, no serious adverse drug reactions occurred, highlighting the outstanding safety profile of MP1032.     

Can official control laboratories quantify reliably fipronil in eggs? Evidence from a proficiency testing round.

A proficiency testing (PT) round dedicated to assess the competence of European Union (EU) National Reference Laboratories (NRLs), EU Official Control Laboratories (OCLs) and OCLs from associated countries for the determination of the insecticide fipronil in eggs is described. The content of the target analytes (sum of fipronil plus its metabolite fipronil sulfone, expressed as fipronil in the PT test material) was set around the regulated Maximum Residue Level (MRL) set by EU legislation. The PT was organised by the European Commission‘s (EC) Directorate General (DG) Joint Research Centre (JRC) – in agreement with the EC DG for Health and Food Safety (SANTE) – following a request by the Belgian Authorities. Eighty-six NRLs and OCLs from 22 EU Member States, Norway, Serbia and Albania participated. The test items used were two materials made of frozen liquid eggs, processed and characterised at the JRC facilities in Geel (Belgium). The majority of the participants (94%) were shown to have a satisfactory performance, expressed as z scores, thus demonstrating the analytical capability of most of the participating NRLs and OCLs to enforce the relevant EU Regulations ((EC) 396/2005 and 1127/2014). Furthermore, 93% of the participants who provided a compliance statement classified, correctly, one of the test items as non-compliant.