Effect of spray nozzle design on liquid-solid contact in fluidized beds

In industrial fluid cokers the feedstock, consisting of heavy bituminous hydrocarbons, is atomized with steam and injected into a hot fluidized bed of coke. Good and uniform contact of the liquid droplets with the solid particles is required to provide heat for the cracking reactions while minimizing mass transfer effects. Experiments in a pilot plant coker have suggested that the initial particle/liquid mixing, in the spray jet, is rather poor. Experiments in a X-ray scanner showed that liquid droplets and entrained particles accumulate just below the tip of the jet plume to form agglomerates.An experimental technique was used to quantitatively determine the quality of mixing with a variety of nozzle configurations including several novel designs. By improving spray stability, redistributing liquid droplets to the solids-rich region of the jet and increasing the surface area of the gas-liquid jet-fluidized bed interface, liquid/solid contact is improved.     

Investigation of the thermal, mechanical, and fracture properties of alumina-epoxy composites

A combination of dynamic shear rheology, thermomechanical analysis (TMA), scanning electron microscopy (SEM), Near-Edge X-ray Absorption Fine Structure (NEXAFS), and fracture toughness testing was utilized to characterize the thermal, mechanical, chemical, and fracture properties of alumina (α-Al₂O₃)-filled epoxy resins as a function of average filler size, size distribution, particle shape, loading, and epoxy crosslink density. In general the cured properties of the filled composites were robust. Small changes in particle size, shape, and size distribution had little impact on the final properties. Resin crosslink density and filler loading were the most critical variables, causing changes in all properties. However, most applications could likely tolerate small changes in these variables also. SEM and NEXAFS characterization of the fracture surfaces revealed that the fracture occurs at the filler interface and the interfacial epoxy composition is similar to the bulk resin, indicating a weak epoxy-alumina interaction. These results are critical for implementation of particulate-filled polymer composites in practical applications because relaxed material specifications and handling procedures can be incorporated in production environments to improve efficiency.     

丰富多彩的亚洲卫星电信市场

随着移动电视在美国的开始应用,新应用逐渐站稳了脚跟,并被美国消费者的要求所推动,而消费者的这些更丰富体验的要求在以前受到过抑制。为了在卫星电信领域更好契合这一趋势,注意亚洲发展并从其经验中总结教训这一做法是有意义的。     

Hardware development for the Bone Proteomics experiment

This paper gives a quick overview of how various scientific, operational and safety related requirements drove the development of hardware for the Bone Proteomics (BOP) experiment that was conducted on the International Space Station during the Italian Soyuz Mission in 2005. The experiment objectives will be highlighted briefly and design solutions will be presented. Comments will be given regarding the choice of a particular design solution and the impact on the complexity, cost and development time. Conclusions in this paper are based on the experience gained when developing the BOP experiment hardware and other relatively small experiment hardware packages, typical of European Soyuz Missions. The observations should not be extrapolated to large payloads. The objective of this paper is not to produce a recipe for developing experiment hardware; dedicated documents for that purpose are available elsewhere. Rather, the objective is to help others profit from experience gained in the development of relatively small experiment hardware packages, and to highlight where time and cost saving decisions can be made.     

On the effectiveness of early life cycle defect prediction with Bayesian Nets

Standard practice in building models in software engineering normally involves three steps: collecting domain knowledge (previous results, expert knowledge); building a skeleton of the model based on step 1 including as yet unknown parameters; estimating the model parameters using historical data. Our experience shows that it is extremely difficult to obtain reliable data of the required granularity, or of the required volume with which we could later generalize our conclusions. Therefore, in searching for a method for building a model we cannot consider methods requiring large volumes of data. This paper discusses an experiment to develop a causal model (Bayesian net) for predicting the number of residual defects that are likely to be found during independent testing or operational usage. The approach supports (1) and (2), does not require (3), yet still makes accurate defect predictions (an R ² of 0.93 between predicted and actual defects). Since our method does not require detailed domain knowledge it can be applied very early in the process life cycle. The model incorporates a set of quantitative and qualitative factors describing a project and its development process, which are inputs to the model. The model variables, as well as the relationships between them, were identified as part of a major collaborative project. A dataset, elicited from 31 completed software projects in the consumer electronics industry, was gathered using a questionnaire distributed to managers of recent projects. We used this dataset to validate the model by analyzing several popular evaluation measures (R ², measures based on the relative error and Pred). The validation results also confirm the need for using the qualitative factors in the model. The dataset may be of interest to other researchers evaluating models with similar aims. Based on some typical scenarios we demonstrate how the model can be used for better decision support in operational environments. We also performed sensitivity analysis in which we identified the most influential variables on the number of residual defects. This showed that the project size, scale of distributed communication and the project complexity cause the most of variation in number of defects in our model. We make both the dataset and causal model available for research use.     

Modelling asymmetry in the peripheral auditory system of the lizard

The ears of lizards are highly directional. The directionality is generated by strong acoustical coupling of the eardrums. A simple lumped-parameter model of the ear followed by binaural comparisons has been shown to perform successful phonotaxis in robot implementations. However, such a model will produce localization errors in the form of response bias if the ears are asymmetrical. We have evaluated how large errors are generated by asymmetry using simulations of the ear model in Mathematica 5.2. The study shows that the effect of asymmetry is minimal around the most directional frequency of the ear, but that biases reduce the useful bandwidth of localization. This work was presented in part at the First European Workshop on Artificial Life and Robotics, Vienna, Austria, July 12–13, 2007     

Assessment of Hematological and Biochemical parameters with extended D-Ribose ingestion

D-ribose, a naturally occurring pentose carbohydrate, has been shown to replenish high- energy phosphates following myocardial ischemia and high intensity, repetitive exercise. Human studies have mainly involved short-term assessment, including potential toxicity. Reports describing adverse effects of D-ribose with prolonged ingestion have been lacking. Therefore, this study assessed the toxicity of extended consumption of D-ribose in healthy adults. Nineteen subjects ingested 20 grams/Day (10 grams, twice a Day) of ribose with serial measurements of biochemical and hematological parameters at Days 0, 7, and 14. No significant toxic changes over the 14-day assessment period occurred in complete blood count, albumin, alkaline phosphatase, gamma glutamyltransferase, alanine amiotransferase, and aspartate aminotransferase. However, D-ribose did produce an asymptomatic, mild hypoglycemia of short duration. Uric acid levels increased at Day 7, but decreased to baseline values by Day 14. D-ribose consumption for 14 days appears not to produce significant toxic changes in both hematological and biochemical parameters in healthy human volunteers.     

Estimating thermal stress in BIPV modules

The thermal stress on building‐integrated photovoltaic modules (BIPV) in Espoo, Finland, was studied with field‐testing of amorphous silicon modules. Based on these results, the thermal stress at two other European locations (Paris and Lisbon) was estimated. The estimation procedure entailed thermal modelling of heat transfer in the façade with meteorological data as input. The results indicate that the thermal stress on BIPV modules in Lisbon is, in this case, approximately 50% higher that in Espoo and between 80 and 200% higher than in Paris, depending on the activation energy of the degradation process. The difference in stress between a BIPV module and a free‐standing module in Espoo was 50–200%. Copyright © 2006 John Wiley & Sons, Ltd.