Low-temperature heat capacity of small Nb3Sn polycrystals by ac calorimetry

It is shown by an ac calorimetry technique that the multiple heat capacity anomalies which occur below the superconducting transition temperature for small polycrystalline Nb₃Sn samples are intrinsic to these samples. The recent suggestions that shear stresses can account for these results are analyzed for their validity. The dependence of the occurrence of these multiple anomalies upon the thermal history of the samples was investigated.Supported in part by U.S. Atomic Energy Commission under the Contract No. USAEC-AT-(04-3)-34 at the Department of APIS, UCSD, La Jolla, California. Present work supported under the auspices of ERDA.Supported by Air Force Office of Scientific Research, Air Force Systems Command USAF, under AFOSR Contract No. AFOSR/F-44620-72-C-0017.     

Grip strength, level of endurance, and manual task performance.

Examined the feasibility of applying the static strength and endurance relationships suggested in 1960 by W. Rohmert to a simple manual task. Results indicate that there was a relationship between grip strength expenditure and impairments in task performance similar in respect to the static strength and endurance relationships suggested. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nanoparticle engineering processes for enhancing the dissolution rates of poorly water soluble drugs

Poor water solubility is an industry wide issue, especially for pharmaceutical scientists in drug discovery and drug development. In recent years, nanoparticle engineering processes have become promising approaches for the enhancement of dissolution rates of poorly water soluble drugs. Nanoparticle engineering enables manufacturing of poorly water soluble drugs into nanoparticles alone, or incorporation with a combination of pharmaceutical excipients. The use of these processes has dramatically improved in vitro dissolution rates and in vivo bioavailabilities of many poorly water soluble drugs. This review highlights several commercially or potentially commercially available nanoparticle engineering processes recently reported in the literature for increasing the dissolution properties of poorly water soluble drugs.     

Delay times in Si MOSFETS in the 4.2–400 K temperature range

Temperature dependence of propagation delay time and power-delay product in Si MOSFETs (fabricated using 1 μm X-ray lithography) has been measured using 19-stage ring oscillators. The delay time was found to decrease with lowering temperature. As a numerical example we found that a delay time of 30 ps at room temperature decreased to 22 and 18 ps at 77 and 4.2 K respectively, and increased to 38 at 400 K. The power showed a slight increase with decreasing temperature, while the power-delay product decreased. The decrease in the delay time has been explained in terms of increase in the electron drift velocity with decreasing temperature, as well as decrease in one component of the capacitive load, namely the source-drain junction capacitance, due to carrier freeze-out.     

Electromagnetic Coupling Between Parallel Lines on a Uniform Earth

Electromagnetic (EM) coupling between parallel lines on a uniform earth influences the results of induced polarization and electromagnetic surveys This paper presents a simplified analysis which allows a fast calculation of EM coupling in the time domain for the dipole-dipole and Schlumberger arrays. The simplified results are in good agreement with the results of other workers.     

Minimizing pattern effects in semiconductor lasers at high rate pulse modulation

This paper deals with analytical and experimental work related to modulation of a semiconductor laser used in high bit rate communication. The approach is based upon minimizing the charge storage effect by a proper choice of the area of the modulating pulses and the bias current. The concept of using additional current pulses to probe for variations in electron density between pulses is investigated. The primary limitation on bit rate is found to be the ability to generate laser drive pulses free of ringing or similar transients. This and the 300 ps pulsewidth, an experimental constraint, limit the bit rate to about 1 Gbit/s. However, by using this approach it appears that bit rates considerably higher than 2 Gbits/s could be reached with sufficiently accurate control of drive pulse shape. It is found that the laser bias and the current pulse area had to be controlled within 1 percent and 10 percent, respectively.     

Magnetic and superconducting properties of niobium oxides

Low temperature magnetic susceptibilities of niobium oxides have been measured. A homogeneous sample of NbO prepared by arc melting and checked by using X-ray and metallographic techniques exhibits no ferromagnetism but becomes superconducting at 1.20°K.     

Application of the ART-2a algorithm to laser ablation aerosol mass spectrometry of particle standards

Single-particle mass spectrometers are now commonly used to analyze atmospheric particles and generate tens of thousands of spectra from typical measurement campaigns. The ART-2a spectrum algorithm has been used to classify these spectra. In this work, we generate a range of particles that are models of those that are common in the atmosphere. A single-particle mass spectrometer is used to analyze these known particles, and the spectra are classified using ART-2a. The optimum vigilance parameter is approximately 0.5 while the optimum learning rate is approximately 0.05. The classifications elucidate limitations in generation of test particles, their analysis by single-particle techniques, and their classification by ART-2a.     

Fate and transport of copper-based crop protectants in plasticulture runoff and the impact of sedimentation as a best management practice

The fate and distribution of copper-based crop protectants, applied to plasticulture tomato fields to protect against disease, were investigated in a greenhouse-scale simulation of farming conditions in a coastal environment. Following rainfall, 99% of the applied copper was found to remain on the fields sorbed to the soil and plants; most of the soil-bound copper was found sorbed to the top 2.5 cm of soil between the plasticulture rows. Of the copper leaving the agricultural fields, 82% was found in the runoff with the majority, 74%. sorbed to the suspended solids. The remaining copper, 18%, leached through the soil and entered the groundwater with 10% in the dissolved phase and 8% sorbed to suspended solids. Although only 1% copper was found to leave the field, this was sufficient to cause high copper concentrations (average 2102+/-433 microg/L total copper and 189+/-139 microg/L dissolved copper) in the runoff. Copper concentrations in groundwater samples were also high (average 312+/-198 microg/L total copper and 216+/-99 microg/L dissolved copper). Sedimentation, a best management practice for reducing copper loadings. was found to reduce the total copper concentrations in runoff by 90% to a concentration of 245+/-127 microg/L; however, dissolved copper concentrations remained stable, averaging 139+/-55 microg/L. Total copper concentrations were significantly reduced by the effective removal of suspended solids with sorbed copper.     

Romantic attachment in individuals with physical disabilities.

Objective: To examine the relationship between adult attachment style and physical disability in intimate romantic relationships. Method: Participants were 50 individuals with adult-onset spinal cord injuries (SCI) and 50 individuals with congenital disabilities (CON) living in the community. The main outcome measures were adult attachment style and dyadic relationship adjustment. Results: Participants with SCI and CON did not differ in rates of secure versus insecure attachment, and the rates of neither group differed significantly from rates reported for persons without disability. Dyadic adjustment was clearly predicted by attachment variables and differed between the participants with SCI and those with CON; individuals with SCI reported greater total dyadic adjustment. Avoidance showed a strong negative association with dyadic satisfaction, but no association was found with dyadic cohesion. Social participation variables were associated with dyadic adjustment. For instance, mobility was positively associated with dyadic satisfaction. Conclusions: Dyadic adjustment in people with disabilities, as in other groups, is affected by attachment style, but disability and social participation variables may also affect dyadic adjustment. Clinicians should consider differences in attachment styles among persons with disabilities and their implications for intimate close relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)