基于粒子群三次样条优化的图像边缘描述算法

针对手工选点生成的三次样条曲线无法准确地描述图像边缘的问题,以粒子群三次参数样条曲线优化算法为基础对现有的图像边缘算法进行了改进。在图像边缘上取若干点作为样条曲线的型值点,利用粒子群算法对这些型值点进行优化,使得到的样条曲线对图像边缘有很好的贴合。实验表明,该算法不仅能够快速拟合样条曲线,而且优化后的样条曲线形态能较好地贴合图像边缘轮廓。     

含温度补偿的便携式土壤水分测定仪研制

针对现有土壤水分测定仪的不足,研制了一种新型的便携式土壤水分测定仪。传感器快速测量出土壤温、湿度数据,GPS自动获取时间、经纬度信息,数据既可临时保存在仪器的存储芯片中,又可通过GPRS/GSM将数据及时发送到后台数据库和手机用户。通过温度补偿和野外验证实验得出,温度补偿项为Δy=0.0002 t3-0.011 t2+0.444 1 t-6.423 2,仪器所有功能运行正常,测量绝对误差为-3.64%~3.82%,平均绝对误差为2.24%,精度较高,适合在地方农技和水利部门推广应用,有助于农业水利信息化水平的提高。     

The effect of cooling rate on the impact performance and dynamic mechanical properties of rotationally molded metallocene catalyzed linear low density polyethylene

This article examines changes to the morphology of rotationally molded metallocene catalyzed linear low density polyethylene brought about by varying the cooling rate during processing. These changes in morphology lead to variations in the impact performance, which is reflected in the dynamic mechanical characteristics of the materials. Various analytical techniques are used in an attempt to explain the differences in impact behavior. Slow cooling is shown to result in high crystallinity, and in the formation of large spherulites, which in turn is detrimental to the impact performance of the material, particularly at low temperatures. The high crystallinity corresponds with a shift in the β transition of the material to a higher temperature, and is shown to result in a higher brittle–ductile transition. A case study was also carried out on samples from a finished part provided by an industrial molder, one section of which failed in a brittle manner when impact tested while the other failed in a ductile manner. Microscopy results showed that the brittle material had large spherulites at the inside surface, while the ductile material showed incipient degradation at this surface, which has previously been shown to be of benefit to impact strength in rotationally molded parts. Dynamic mechanical studies again showed a β transition at a higher temperature in the brittle samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1963–1971, 2006     

Preparation and surface activity of modified soy protein

A series of novel surfactants have been prepared by the reaction of hydrolyzed soy protein with alkyl succinic anhydride. These novel surfactants exhibit excellent surface active properties including surface tension, foaming, emulsifying, wetting power, and buffer ability. The hydrophobic modified protein exhibit more surface activity than original protein because of the enhanced hydrophobicity in structure. The increase in hydrophobic chain length leads to an increase in the surface activity. The surface tension reduction is correlated to the hydrophobicity of the modified molecule, which was determined by a fluorescent probe. In application on cotton bleaching procedures, these surfactants increase the whiteness of fabrics. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3498–3503, 2006     

Manufacturing and foaming of high melt viscosity of polypropylene by using electron beam radiation technology

The high melt viscosity of polypropylene was studied by grafting bifunctional monomers, 1,6‐hexanediol diacrylate (HDDA) and tripropylene glycol diacrylate (TPGDA), onto homopolypropylene (HPP) and random ter‐polypropylene (RTPP) under electron‐beam irradiation. Creation of the high‐melt‐viscosity polypropylene was possible at low radiation dosage and low monomer content, under a prohibition of both radiation degradation and homopolymerization. TPGDA monomer was more effective in increasing the melt viscosity of HPP compared with RTPP, whereas HDDA monomer was more effective for enhancing the melt viscosity of RTPP. Such different effects of monomers on melt viscosity may arise from different monomer structures, namely, TPGDA has additional three methyl groups, but HDDA has no methyl groups. Electron‐beam radiation technology, on an increase of the melt viscosity, was much more effective in HPP than RTPP, when compared with virgin polymers. Modified RTPP and HPP with high melt viscosity were capable of foaming with numerous fine cells, of which the modified HPP with 1.5 mmol TPGDA and 0.5 kGy could create more spherical foam cells and its bending strength was 1.5 times more than that of the foamed RTPP. POLYM. ENG. SCI., 46:431–437, 2006. © 2006 Society of Plastics Engineers.     

多处理器混合关键性系统中的划分调度策略

多核处理器正越发广泛地应用到现代嵌入式系统的设计与实现当中,其强大的计算能力为将多个不同关键性级别的功能子系统集成到统一的共享资源平台提供了支持.混合关键性系统的调度问题即便在单处理器平台中都极具挑战性,在多处理器平台则更为困难.将目前资源利用率最高的单处理器混合关键性调度算法EY-VD扩展到多处理器平台中.首先,结合传统的划分调度策略提出了适用于多处理器混合关键性系统的MC-PEDF(mixedcriticality partitioned earliest deadline first)划分调度算法.尽管比之前的算法有更好的可调度性能,但传统的划分策略不能有效地平衡不同关键性级别下的负载,故其不完全适用于混合关键性系统.为了克服传统策略的不足,提出了划分调度策略OCOP(one criticality one partition).OCOP允许系统在关键性模式切换时对实时任务集进行重新划分,进而更好地平衡各个处理器在不同关键性模式中的资源利用率.基于OCOP,提出了第2种划分调度算法MC-MP-EDF(mixed-criticality multi-partitioned EDF).基于随机生成任务集的仿真实验结果表明,与MC-PEDF和已有的算法相比,MC-MP-EDF能够显著地提高系统的可调度性,尤其是在处理器数量较多的系统中.     

基于最优连通功率控制的WSNs跨层路由优化算法

针对非连通区域节点空洞效应和热点区域节点间通信干扰导致的路由服务质量（QoS）下降问题,提出了一种基于最优连通功率控制的无线传感器网络（WSNs）跨层路由优化算法。算法采用自适应最优连通功率控制策略,在避免路由空洞产生和保证网络连通性条件下,降低热点区域节点数据转发竞争干扰;通过位置信息、剩余能量和干扰等级的跨层信息交互,动态选取最优转发节点,提高网络整体性能。仿真实验表明：算法能够提高路由（QoS）、优化网络生命周期和降低热点区域通信干扰。     

Comparative study of the physical aging of the epoxy systems BADGE n = 0/m‐XDA and BADGE n = 0/m‐XDA/PEI

The physical aging of the epoxy network consisting of a diglycidyl ether of bisphenol A, m‐xylylenediamine, and polyetherimide was studied by differential scanning calorimetry. The glass transition temperature and the variation of the specific heat capacities have been calculated using the method, based on the intersection of both enthalpy–temperature lines for glassy and liquid states. The apparent activation energy (E_H) was calculated using a single method that involved separate temperature and excess enthalpy dependency. All calorimetric data were compared with those obtained for the epoxy network without thermoplastic. thermoplastic. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3931–3935, 2006     

面向钢轨监测的无线传感器网络网关设计与性能测试

针对我国铁路钢轨实时广域监测的重大需求,通过研究异构无线传感器网络（WSNs）通信技术,设计并实现了一种基于Zig Bee-3G通信的无线传感器网络网关.进行了通信电路设计和电磁兼容设计,并在WinCE操作系统平台上实现了Zig Bee网络与3G网络之间的互联,开发了网关远程维护管理模块.对网关设备分别进行了网络传输性能测试和电磁兼容测试,测试结果表明：此网关传输效率高、抗电磁干扰能力强,能够满足铁路轨道监测现场的应用要求.     

基于LabWindows/CVI的排水管道机器人测控系统设计

介绍了国内排水管道现状及检测与维护情况,针对排水管道机器人特殊的作业环境,设计了一种基于LabWindows/CVI的排水管道机器人测控系统。该系统以PLC为核心,采用电涡流位移传感器与摄像头结合检测管道缺陷,引入模糊控制算法,增强了系统的鲁棒性和可靠性。通过基于LabWindows/CVI虚拟仪器设计的上位机软件与下位机PLC实时通信,实现了系统对机器人动作的控制,以及数据的采集、处理、存储、显示等功能。整个系统人机交互简单、抗干扰性强、可靠性好,可满足机器人作业时的清理和检测要求。