Mechanical properties and thermal stability of double‐shell thermal‐energy‐storage microcapsules

Double‐shell‐structured microcapsules encapsulating phase‐change materials (micro‐PCMs) with an average diameter of 5–10 μm were successfully fabricated with a melamine–formaldehyde resin as the coating material. The mechanical properties of the obtained piled micro‐PCMs, tested under compression, were evaluated with a pressure sensor. Typical stress–strain curves showed that both the single‐shell‐ and double‐shell‐structured microcapsules had yield points and maximum point pressures. The morphological changes in the shell surface confirmed the existence of yield points by scanning electron microscopy. When the pressure was beyond the yield point, the microcapsules showed conventional plastic behavior, and the double‐shell structure was more mechanically stable than the single‐shell one. Differential scanning calorimetry analysis results revealed that the properties of the phase‐change materials experienced no variation after coating with a single‐shell‐ or double‐shell‐structured polymer. Thermogravimetric analysis showed that the double‐shell‐structured micro‐PCMs experienced a weight loss of only about 5% from 86.3 to 232°C but did so more rapidly from 232 to 416°C. Thermoregulation was determined with periodical heating and cooling tests. The data showed that the micro‐PCMs changed temperature in a narrow range of 20–25°C with a time lag of 20 min to reach the maximum or minimum temperature in comparison with a reference temperature of 18–28°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1295–1302, 2007     

Effect of chromium aging on the structural and thermal properties of chromium polyacrylate

The effects of aging time of Cr(III) solutions on the structural, thermal, magnetic, and morphological properties of chromium polyacrylate complexes were studied. Chromium retention was found to increase with longer aging periods. IR spectra revealed the formation of polychelate structures with noticeable changes on aging. The interaction of multivalent, polynuclear Cr(III) species with the polymer backbone resulted in a decrease in thermal stability for the complexes prepared from olated chromium solutions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 490–493, 2005     

半刚性钢-混凝土组合节点受弯承载力的计算

在半刚性钢 -混凝土组合框架中 ,混凝土板中的纵向钢筋增加了节点的强度和刚度 ,但是 ,传统的设计方法往往忽略纵向钢筋的作用而采用简化的计算模型。因此 ,出于经济效益考虑 ,应该根据半刚性组合节点的实际受力性能建立更加准确的计算方法。这里详细介绍了考虑混凝土板纵向钢筋作用的半刚性组合节点受弯承载力的计算方法 ,计算结果表明 ,建议的公式与试验结果吻合良好 ,可供规范制定和工程应用参考。     

低温流动改进剂在柴油蜡晶生长阶段对蜡晶形貌的控制作用

采用实验和分子动力学模拟相结合的方法,考察了多种乙烯-醋酸乙烯酯(EVA)和聚甲基丙烯酸酯(PMA)类低温流动改进剂(CFI),对蜡晶晶体形貌的影响。结果表明,蜡晶的各个晶面在附着了CFI后,其吸引烃分子的能力均有不同程度的增强,各晶面的相对生长速度也将随之改变。蜡晶(001)面相对生长速度增加的越显著,越有利于蜡晶晶体形貌由片状转变为近似四棱柱状甚至双锥状,从而使蜡晶粒径减小,并减弱晶粒间的相互作用,提高蜡晶分散度,更显著的改善柴油低温流动性能。     

Harnessing the Melting Peculiarities of Ultra‐High Molecular Weight Polyethylene Fibers for the Processing of Compacted Fiber Composites

Summary: Compacted fiber composites offer unique properties due to their lack of an extraneous matrix. The conditions of processing ultra‐high molecular weight polyethylene (UHMWPE) fibers were simulated in a heated pressure cell. In situ X‐ray diffraction measurements were used to follow the relevant transitions and the changes in the degree of crystallinity during melting and crystallization. The results strongly support the suggestion that the hexagonal crystal phase, in which the chain conformation is extremely mobile on the segmental level, constitutes the physical basis of compaction technologies for processing UHMWPE fibers into a single‐polymer composite. This report suggests that using a pseudo‐phase diagram outlining the occurrence of different phases during slow heating and the degree of crystallinity can provide valuable insight into the technological parameters relevant for optimal processing conditions.

Degree of crystallinity as a function of pressure and temperature in a region relevant to compaction processes.     

填料技术在高浓度氯碱化工废水生物接触氧化法处理中应用的研究

阐述了填料技术在生物接触氧化法处理高浓度氯碱化工废水中的应用,介绍了目前国内外应用较广的几种主要填料的工艺特点,对它们的性能进行了比较;并结合锦化化工(集团)有限责任公司污水处理厂多年的生产运行经验,讨论了生物接触氧化法中应用的几种较理想的填料;扼要分析了填料技术的发展方向和前景。     

Vitamin A microencapsulation within poly(methyl methacrylate)‐g‐polyethylenimine microspheres: Localized proton buffering effect on vitamin A stability

To stabilize vitamin A in a cosmetic/dermatological formulation, we present here a new encapsulation method based on polymer microspheres having a localized “proton‐buffering” capacity. Poly(methyl methacrylate)‐g‐polyethylenimine (PMMA‐g‐PEI) was prepared by direct condensation grafting of PEI onto poly(methyl methacrylate‐co‐methyl acrylic acid). The reaction was confirmed by FT‐IR analysis showing the amide vibration at 1,550 cm^?1. Elemental analysis indicated that the weight content of the grafted PEI was 1.6% (w/w). Vitamin A was encapsulated into PMMA‐g‐PEI microspheres by using an oil‐in‐water (O/W) single emulsion method. The presence of PEI moiety dramatically improved the chemical stability of vitamin A in microspheres. Vitamin A encapsulated within PMMA‐g‐PEI microspheres maintained 91% of its initial activity after 30‐day incubation at 40°C, while only maintaining 60% within plain PMMA microspheres. This study demonstrates that proton‐buffering within hydrophobic polymer matrix is a useful strategy for stabilizing “acid‐labile” active ingredients. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 517–522, 2004     

轻量级PRESENT加密算法功耗攻击研究

PRESENT密码算法是2007年提出来的一种轻量级分组密码算法, 适合于物联网环境下的安全加密。对PRESENT加密算法结构进行了深入研究, 提出了其适合功耗攻击的两个最佳攻击点, 详细介绍了针对PRESENT加密系统进行功耗分析攻击的设计与实现过程, 实验结果表明未加防护措施的PRESENT加密系统不能抵御一阶差分功耗分析攻击, 从而给PRESENT加密算法的安全改进提供一定的设计参考。     

一种基于优先级表的实时调度方法

针对单处理器实时系统动态调度问题进行了研究,分析任务的到达时间、执行时间、截止时间和空闲时间等任务属性的敏感度和影响度,提出了一种基于优先级表的调度算法PTBM,使相对截止期越小、空闲时间越大的任务优先级越高。对关于实时任务属性敏感度和影响度的结论验证和与传统的EDF、LLF和PTD算法的对比进行仿真实验,仿真结果表明基于优先级表设计的实时调度算法PTBM具有较高的调度成功率。该方法可应用于实时系统的实时任务的动态调度中。     

人工鱼群—粒子群混合算法优化进港航班排序

针对空中交通管理中的进港航班排序问题, 提出了人工鱼群—粒子群混合算法(AFPSO)这一航班排序算法来优化进港航班排序, 使时段内进港航班队列总延误时间最少。算法结合了基本人工鱼群算法(AFSA)和基本粒子群算法(PSO)各自的优点, 先以AFSA在全局寻找满意的解域, 再以PSO算法在这些解域中进行快速的局部搜索获得精确解, 最终使算法提高收敛速度和搜索精度。仿真结果表明, 在单跑道和双跑道情况下, AFPSO算法使得航班队列总延误时间比FCFS调度方法减少了20. 9%和34. 4%, 比基本AFSA减少了3. 2%和3. 5%。算法得到的满意解能够为自动化空中交通管理提供实时支持。