Distinct element method analysis of a retaining wall using a steel frame and fill materials

A technique is developed to clearly establish the shear resistance of a cellular structure, retaining wall composed of a steel frame and fill materials with both continuous and discontinuous characteristics. To overcome the limitation of the existing analysis approach based on continuum mechanics, in which the shear behavior and interaction between the frames and fill material of this type of structure are difficult to describe, this paper introduces displacement incremental analysis into the distinct element method. The results obtained by using the proposed approach are compared with experimental results to verify its accuracy. The results show an internal friction angle of fill materials and overburdening load are major factor determining the shear resistance of a retaining wall with a cellular structure type. From the results of the parametric study on the shear behavior of this type of structure, this paper also proposes a shear resistance moment-shear displacement formula for designing a retaining wall with a cellular structure type.     

Measurement feedback control for a class of feedforward nonlinear systems

We propose a measurement feedback controller for a class of feedforward nonlinear systems under sensor noise. The sensor noise has unknown magnitude, frequency, and phase. Our proposed controller is coupled with a low‐pass filter in such a way that the sensor noise is attenuated. We show that the controlled system results in bounded states whose ultimate bounds are inversely proportional to the minimum frequency of the sensor noise. Our result is further generalized to work in a case where the sensor noise is only required to have a Fourier transform with finite energy. Moreover, if the sensor noise enters only at partial states, depending on the location of the sensor noise, the ultimate bounds of the particular states can be made arbitrarily small via the gain factor of the controller. Copyright © 2012 John Wiley & Sons, Ltd.     

Extraction of enhanced evoked potentials using wavelet filtering

In order to remove physiological artefacts and gain the improved evoked potentials, we propose a filtering method using the multi-resolution wavelet transform. The wavelet transform is repeatedly performed until all resolution levels are obtained. It decomposes the measured evoked potentials into scale coefficients corresponding to low frequency components and wavelet coefficients corresponding to high frequency components. In the wavelet domain, artefacts are dispersed mainly at the wavelet coefficients rather than the scaling coefficients. Thus, when the inverse wavelet transform is performed, this method shrinks the wavelet coefficients to reduce artefacts with shrinkage functions. By repeatedly performing the inverse wavelet transform, an evoked potential having the reduced artefacts and background noise is obtained. In this study, quantitative evaluation with simulation data and actual clinical data were conducted. As a result, characteristic peaks of evoked potential could be gained removing background EEG and artefacts using suggested shrinkage function. It was improved more than 0.2–1.6Db compared to the conventional averaging method. Also, the system for measuring and analyzing evoked potentials using DSP is implemented.     

A Hidden‐picture Puzzles Generator

A hidden‐picture puzzle contains objects hidden in a background image, in such a way that each object fits closely into a local region of the background. Our system converts image of the background and objects into line drawing, and then finds places in which to hide transformed versions of the objects using rotation‐invariant shape context matching. During the hiding process, each object is subjected to a slight deformation to enhance its similarity to the background. The results were assessed by a panel of puzzle‐solvers.     

Replication of nanostructures on microstructures by intermediate film mold inserted hot embossing process

The present study proposes a simple method to replicate nano/micro combined multiscale structures using an intermediate film mold and anodic aluminum oxide (AAO) nanomold in hot embossing process. The proposed method is simply to add an intermediate film mold with microscale thru-hole patterns to the ordinary mold system, on which nanostructures are patterned, in the hot embossing process. The intermediate film mold is inserted between polymer substrate and AAO nanomold. During the hot embossing process, the polymer first fills microscale thru-hole patterns in the intermediate film mold and subsequently fills nanopores in AAO nanomold, resulting in the nano/micro combined structures. The intermediate film molds, which have microscale thru-hole patterns were fabricated by micro-milling, laser ablation, etching methods and/or LIGA process. The nano/micro combined structures were successfully replicated by the proposed method.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Design and analysis of a self-tuning feedback controller for the Internet

Active queue management (AQM) is an effective method used in Internet routers for congestion avoidance, and to achieve a tradeoff between link utilization and delay. The de facto standard, the random early detection (RED) AQM scheme, and most of its variants use average queue length as a congestion indicator to trigger packet dropping. This paper proposes a novel packet dropping scheme, called self-tuning proportional and integral RED (SPI-RED), as an extension of RED. SPI-RED is based on a self-tuning proportional and Integral feedback controller, which considers not only the average queue length at the current time point, but also the past queue lengths during a round-trip time to smooth the impact caused by short-lived traffic dynamics. Furthermore, we give theoretical analysis of the system stability and give guidelines for selection of feedback gains for the TCP/RED system to stabilize the average queue length at a desirable level. The proposed method can also be applied to the other variants of RED. Extensive simulations have been conducted with ns2. The simulation results have demonstrated that the proposed SPI-RED algorithm outperforms the existing AQM schemes in terms of drop probability and stability.     

Electron beam lithography-assisted fabrication of Au nano-dot array as a substrate of a correlated AFM and confocal Raman spectroscopy

This paper documents a study of an Au nano-dot array that was fabricated by electron beam lithography on a glass wafer. The patterns that had features of 100nm dots in diameter with a 2-mum pitch comprised a total area of 200x200mum(2). The dot-shaped Cr underlayer was open to the air after developing Poly(methyl methacrylate) (PMMA). When dipped into the Cr etchant, the exposed Cr layer was eliminated from the glass wafer in a short period of time. In order to ultimately fabricate the Ti/Au dot arrays, Ti and Au were deposited onto the arrays with a thickness of 2 and 40nm, respectively. The lift-off procedure was carried out in the Cr etchant using sonication in order to completely remove the residual Cr/PMMA layer. The fabricated Au nano-dot array was then immersed in an Ag enhancing solution and then into an ethanol solution containing (N-(6-(Biotinamido)hexyl)-3'-(2'-pyridyldithio)-propionamide (Biotin-HPDP). The substrate was analyzed using a correlated atomic force microscopy (AFM) and confocal Raman spectroscopy. Through this procedure, position-dependent surface-enhanced Raman spectroscopy (SERS) signals could be obtained.     

Developable polynomial surface approximation to smooth surfaces for fabrication parameters of a large curved shell plate by Differential Evolution

This paper presents a simple and efficient method to approximate a developable surface to a compound design surface by a polynomial. It is required to predict a final shape of roll bending in the fabrication of a curved shell plate. The roll bending process usually makes the cylindrical or conical curvature from an initial flat plate. It means that the final shape is developable or the surface representation has zero Gaussian curvature. The fabrication shape is important in order to estimate process parameters of roller bending.An optimization problem is formulated to determine the polynomial surface which is in the closest proximity to the design surface or the given shell plate, which is subjected to developability. The results and the efficiency of this algorithm are verified and evaluated by applying it to some shell plates which are obtained from a real ship model. The predicted bending shape becomes fundamental information in determining more process parameters for the fabrication of a compound curved shell plate.