Chemical processing and characterization of spinel-type thermistor powder in the Mn-Ni-Fe oxide system

The coprecipitated Mn-Ni-Fe oxalate was prepared from the mixed sulfate solution by optimum pH control. The chemical composition agreed well with that of the starting solution, and the thermal decomposition of the Mn-Ni-Fe oxalate in air below 600 °C led to the direct formation of cubic spinel phase with fine particle size. The sinterability of the calcined powder, the stability of cubic spinel phase and the influence of annealing temperature on electrical properties of the sintered bodies, were investigated.     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²     

The dendritic growth of γ′ precipitates and grain

The growth pattern of γ precipitates in the grains and at the grain boundaries has been investigated in a Ni-24Co-4Al-4Ti-5Cr-5Mo (weight percent) alloy of very small lattice misfit between the precipitate and the matrix phases under varying heat-treatment conditions. When aged at temperatures lower than the solvus temperature (T _s = 1150 °C) by more than 30 °C after direct cooling from the solution-treatment temperature, the nucleation density is high. In this condition, the supersaturation is quickly removed because of the overlapping diffusion fields and the precipitates undergo Ostwald ripening from the early stage. The precipitates then have an equilibrium shape of spheres in the grains and truncated spheres at nearly straight grain boundaries. The precipitates at the grain boundaries are coherent with one of the grains, and their number density is not much larger than that in the grains, apparently because of a large contact angle (about 150 deg) with the grain boundary. Quenching the alloy after the solution treatment and aging at any temperature also produce high precipitate number density and equilibrium shapes. When aged at temperatures just belowT _s (above 1140 °C), the nucleation density is low, the precipitates grow dendritically in the grains, and the grain boundaries become serrated. The observed dendritic growth characteristics do not quantitatively agree with the predictions of Mullins and Sekerka theory, but the discrepancy may be due to the uncertainties in both the observed and calculated quantities. By deeply etching the matrix, it is shown that the grain boundary serration is produced by the precipitates growing preferentially in the direction of the incoherent boundary because of the rapid solute diffusion along the grain boundary. The dendritic growth and grain boundary serration can be obtained also by slowly cooling through the temperature range just belowT _s.     

Unconstrained and constrained motion control of a planar two-link structurally flexible robotic manipulator

Unconstrained and constrained motion control of a planar two-link structurally-flexible robotic manipulator are considered in this study. The dynamic model is obtained by using the extended Hamilton's principle and the Galerkin criterion. A method is presented to obtain the linearized equations of motion in Cartesian space for use in designing the control system. The approach to solving the control problem is to use feedforward and feedback control torques. The feedforward torques maneuver the flexible manipulator along a nominal trajectory and the feedback torques minimize any deviations from the nominal trajectory. The feedforward and feedback torques are obtained by solving the inverse dynamics problem for the rigid manipulator and designing linear quadratic Gaussian with loop transfer recovery (LQG/LTR) compensators, respectively. The LQG/LTR design methodology is exploited to design a robust feedback control system that can handle modeling errors and sensor noise, and operate on Cartesian space trajectory errors. Computer simulated results are presented for an example planar, two-link, structurally flexible robotic manipulator. © 1994 John Wiley & Sons, Inc.     

50 nm MOSFETs with side-gates for induced source/drain extension

50 nm long MOSFETs with side-gates were optimised in terms of the side-gate length and successfully fabricated with conventional MOS technology. The simulated and fabricated 50 nm long MOSFET shows a reasonable subthreshold swing of 81 mV/dec and a low drain induced barrier lowering of 77 mV     

Steroidal glycosides of the 14,15-seco-18-nor-pregnane series from Cynanchum ascyrifolium

Three new steroidal glycosides named cynascyrosides A-C were isolated from the roots of Cynanchum ascyrifolium. The structures of these compounds were determined on the basis of spectroscopic and chemical evidence as cynajapogenin A 3-O-alpha-D-oleandropyranosyl-(1-->4)-beta-L-cymaropyranosyl -(1-->4)-beta-D- digitoxopyranoside; cynajapogenin A 3-O-beta-D-glucopyranosyl-(1-->4)-alpha-L-cymaropyranosyl- (1-->4)-beta-L-cymaropyranosyl-(1-->4)-beta-L-cymaropyranoside+ ++; cynajapogenin A 3-O-beta-D-glucopyranosyl-(1-->4)-alpha-L-cymaropyranosyl- (1-->4)-beta-D-digitoxopyranosyl-(1-->4)-beta-L-cymaropyranosid e.     

Central GABAA and GABAB receptor modulation of basal and stress-induced plasma interleukin-6 levels in mice

The development of control strategies for loiasis is of crucial importance in endemic areas and depends heavily on the accurate identification of occult-infected individuals. A polymerase chain reaction (PCR) and nested polymerase chain reaction (nested PCR) were developed and based on sequences of the repeat 3 region (15r3) of the gene encoding a Loa loa 15-kD protein. The assays was performed on 20 blood samples from occult-infected subjects and 30 from field-collected amicrofilaremic individuals. The size of the initial PCR product was 396 basepairs (bp). When this initial amplification using primers 15r3(1) and 15r3(2) was carried out for 30 cycles, the PCR products from three of the 20 occult-infected and five of the 30 amicrofilaremic individuals were visualized after electrophoresis by staining the gel with ethidium bromide. Subsequent Southern blotting and hybridization with the specific probe revealed hybridization in 19 of 20 occult-infected and 23 of 30 amicrofilaremic samples but only after two days of exposure of the blot to the x-ray film. When the nested PCR was carried out (product size = 366 bp, primers 15r3(3) and 15r3(4)), 19 of 20 occult-infected and 23 of 30 amicrofilaremic samples that were positive by Southern hybridization of the initial PCR products were strongly positive by staining with ethidium bromide. Qualitative Southern blotting of the nested PCR products using the same probe previously described confirmed the ethidium bromide staining results after a very short exposure time of 4 hr. These results demonstrate that the nested PCR amplification product is specific and that its sensitivity in detecting occult loiasis is 95%. This approach has significant promise for the screening of large human populations for active loiasis without the requirement for blotting and hybridization of the PCR products.     

Purification and characterization of cysteine protease from Pleurotus ostreatus

Cysteine protease activity in mycelial culture increased 7.7-fold after fruit body formation in Pleurotus ostreatus, using the Leu pNA (LPNA) cleavage assay. The enzyme was purified from fruit bodies and its M(r) was 97,000 by gel filtration and 48,500 by SDS-PAGE, indicating that it is a dimer. The enzyme was sensitive to iodoacetic acid, p-chloromercuribenzoate, N-ethylmaleimide, and HgCl2. The sequence of the first 9 N-terminal amino acids of cysteine protease was ASGLXXAIL.     

Synthesis and comparative molecular field analysis (CoMFA) of antitumor 3-arylisoquinoline derivatives

In this study a series of 3-arylisoquinoline derivatives were synthesized and cytotoxicity against human melanoma tumor cell evaluated, and a three dimensional quantitative structure-activity relationship was investigated using the comparative molecular field analysis (CoMFA). The results suggested that the electrostatic, steric and hydrophobic factors of 3-arylisoquinolines were strongly correlated with the antitumor activity. Considerable predictive ability (cross-validated r2 as high as 0.721) was obtained through CoMFA.