Measurement of periodic micro flows using micro-particle image velocimetry with phase sampling

A phase-sampling method has been developed to measure periodic flows at a high temporal resolution using conventional micro-particle image velocimetry (PIV). In this technique, the sampling is set such that each velocimetry dataset represents a unique point in phase of a periodic flow. The flow characteristics over a single cycle are reconstructed from measurements over a number of cycles, thus allowing measurement at a higher temporal resolution than the PIV system. The flow measurements were performed for AC electroosmotic flows and verified with results from the phase-locking technique. The temporal resolution is limited by the shortest camera exposure time and the time separation between laser pulses. The theoretical sampling resolution can be as low as 20 μs for 100 Hz periodic flows. A resolution of 200 μs was obtained in the experiment using 40 velocimetry datasets.     

An InGaP-GaAs HBT MMIC smart power amplifier for W-CDMA mobile handsets

We demonstrate a new linearized monolithic microwave integrated circuit smart power amplifier of extraordinary high power-added efficiency (PAE), especially at the most probable transmission power of wide-band code-division multiple-access handsets. A PAE of 21% at 16 dBm of output power, which is the maximum bound of the most probable transmission power in IS-95 systems, was obtained, as well as 40% at 28 dBm, the required maximum output power, with a single-chip MMIC power amplifier. The power amplifier has been devised with two InGaP-GaAs heterojunction bipolar transistor amplifying chains parallel connected, each chain being optimized for a different P/sub 1dB/ (1-dB compression point) value: one for 16 dBm for the low-power mode, targeting the most probable transmission power, and the other for 28 dBm for the high-power mode. The high-power mode operation shows 40% of PAE and -30 dBc of adjacent channel leakage power ratio (ACLR) at the maximum output power of 28 dBm. The low-power mode operation exhibits -34 dBc of ACLR at 16 dBm with 14 mA of a quiescent current. This amplifier improves power usage efficiency and, consequently, the battery lifetime of the handset by a factor of three.     

Oxygen Surface Exchange at Grain Boundaries of Oxide Ion Conductors

The role of grain boundaries on oxygen surface exchange in an oxide ion conductor is reported. Atomic‐scale characterization of the microstructure and chemical composition near the grain boundaries of gadolinia‐doped ceria (GDC) thin films show the segregation of dopants and oxygen vacancies along the grain boundaries using the energy dispersive spectroscopy in scanning transmission electron microscopy (STEM‐EDS). Kelvin probe microscopy is employed to verify the charge distribution near grain boundaries and shows that the grain boundary is positively charged, indicating a high concentration of oxygen vacancies. AC impedance spectroscopy on polycrystalline GDC membranes with thin interfacial layers with different grain boundary densities at the cathodes demonstrated that the cells with higher grain boundary density result in lower electrode impedance and higher exchange current density. These experimental evidences clearly show that grain boundaries on the surface provide preferential reaction sites for facilitated oxygen incorporation into the GDC electrolyte.     

Self‐Interference Cancellation for Shared Band Transmission in Nonlinear Satellite Communication Channels

For efficient spectral utilization of satellite channels, a shared band transmission technique is introduced in this paper. A satellite transmits multiple received signals from a gateway and terminal in the common frequency band by superimposing the signals. To improve the power efficiency as well as the spectral efficiency, a travelling wave tube amplifier in the satellite should operate near the saturation level. This causes a nonlinear distortion of the superimposed transmit signal. Without mitigating this nonlinear effect, the self‐interference cannot be properly cancelled and the desired signal cannot be demodulated. Therefore, an adaptive compensation scheme for nonlinearity is herein proposed with the proper operation scenario. It is shown through simulations that the proposed shared band transmission approach with nonlinear compensation and self‐interference cancellation can achieve an acceptable system performance in nonlinear satellite channels.     

Room-Temperature-Processable Highly Reliable Resistive Switching Memory with Reconfigurability for Neuromorphic Computing and Ultrasonic Tissue Classification

Reversible metal-filamentary mechanism has been widely investigated to design an analog resistive switching memory (RSM) for neuromorphic hardware-implementation. However, uncontrollable filament-formation, inducing its reliability issues, has been a fundamental challenge. Here, an analog RSM with 3D ion transport channels that can provide unprecedentedly high reliability and robustness is demonstrated. This architecture is realized by a laser-assisted photo-thermochemical process, compatible with the back-end-of-line process and even applicable to a flexible format. These superior characteristics also lead to the proposal of a practical adaptive learning rule for hardware neural networks that can significantly simplify the voltage pulse application methodology even with high computing accuracy. A neural network, which can perform the biological tissue classification task using the ultrasound signals, is designed, and the simulation results confirm that this practical adaptive learning rule is efficient enough to classify these weak and complicated signals with high accuracy (97%). Furthermore, the proposed RSM can work as a diffusive-memristor at the opposite voltage polarity, exhibiting extremely stable threshold switching characteristics. In this mode, several crucial operations in biological nervous systems, such as Ca²⁺ dynamics and nonlinear integrate-and-fire functions of neurons, are successfully emulated. This reconfigurability is also exceedingly beneficial for decreasing the complexity of systems—requiring both drift- and diffusive-memristors.     

SONET implementation

The status of the synchronous optical network (SONET) infrastructure development and deployment are examined to see whether or not they meet original expectations. Issues arising from deployment, such as the use of new features and the necessary support from operations systems, and future directions of SONET are discussed. These future trends include digital cross connect systems (DCSs), SONET ring architectures, and hybrid ring-DCS networks. New SONET services are also discussed     

Highly stable optical add/drop multiplexer using polarization beam splitters and fiber Bragg gratings

We demonstrate a novel wavelength-division add/drop multiplexer employing fiber Bragg gratings and polarization beam splitters. The multiplexer is easy to fabricate without any special technique such as UV trimming, and yet shows very stable performance with less than 0.3-dB crosstalk power penalty in a 0.8-nm-spaced, 2.5-Gb/s-per-channel wavelength-division multiplexing (WDM) transmission system.     

Light‐Induced Surface Modification of Natural Plant Microparticles: Toward Colloidal Science and Cellular Adhesion Applications

Playing an instrumental role in the life of plants, pollen microparticles are one of the most fascinating biological materials in existence, with abundant and renewable supply, ultrahigh durability, and unique, species‐specific architectural features. Aside from their biological role, pollen microparticles also demonstrate broad utility as functional materials for drug delivery and microencapsulation, and increasingly for emulsion‐type applications. As natural pollen microparticles are predominantly hydrophobic, developing robust surface functionalization strategies to increase surface hydrophilicity would increase the range of colloidal science applications, including opening the door to interfacing microparticles with biological cells. This research investigates the extraction and light‐induced surface modification of discrete pollen microparticles from bee‐collected pollen granules toward achieving functional control over the responses elicited from discrete particles in colloidal science and cellular applications. Ultraviolet–ozone treatment is shown to increase the proportion of surface elemental oxygen and ketones, leading to increased surface hydrophilicity, enhanced particle dispersibility, tunable control over Pickering emulsion characteristics, and enhanced cellular adhesion. In summary, the findings demonstrate that light‐induced surface modification improves the functional properties of pollen microparticles, and such insights also have broad implications across materials science and environmental science applications.     

Improving Radio Frequency Transmission Properties of Graphene via Carrier Concentration Control toward High Frequency Transmission Line Applications

Graphene has been gradually studied as a high‐frequency transmission line material owing to high carrier mobility with frequency independence up to a few THz. However, the graphene‐based transmission lines have poor conductivity due to their low carrier concentration. Here, it is observed that the radio frequency (RF) transmission performance could be severely hampered by the defect‐induced scattering, even though the carrier concentration is increased. As a possible solution, the deposition of the amorphous carbon on the graphene is studied in the high‐frequency region up to 110 GHz. The DC resistance is reduced by as much as 60%, and the RF transmission property is also enhanced by 3 dB. Also, the amorphous carbon covered graphene shows stable performance under a harsh environment. These results prove that the carrier concentration control is an effective and a facile method to improve the transmission performance of graphene. It opens up the possibilities of using graphene as interconnects in the ultrahigh‐frequency region.