Antioxidant properties of garden strawberry leaf extract and its effect on fish oil oxidation

The present study characterises garden strawberry leaf extract and reports its effect on shelf life and quality characteristics of fish oil. Radical scavenging capacity of the extract in DPPH^? and ABTS^?+ assays was equivalent to 1207 and 1579 μmol g^?1 of trolox equivalents, respectively, total phenolic content was 257 mg g^?1 of gallic acid equivalents. Phenolic and volatile constituents were analysed by liquid chromatography/mass spectrometry (LC/MS) and gas chromatography/mass spectrometry (GC/MS). The extract was added to fish oil and its oxidation was followed during 42 days: peroxide, p‐anisidine values and hexanal concentration were lower in the samples with extract, particularly at the end of storage. The effect of extract on fatty acid composition was not significant, however the changes in the percentages of some individual acids were observed. Fish oil containing 5% of extract had lower levels of lipid oxidation in comparison to other samples. The results indicate that strawberry leaves could be a potential source of natural antioxidants.     

Multiresolution for Algebraic Curves and Surfaces using Wavelets

This paper describes a multiresolution method for implicit curves and surfaces. The method is based on wavelets, and is able to simplify the topology. The implicit curves and surfaces are defined as the zero-valued piece-wise algebraic isosurface of a tensor-product uniform cubic B-spline. A wavelet multiresolution method that deals with uniform cubic B-splines on bounded domains is proposed. In order to handle arbitrary domains the proposed algorithm dynamically adds appropriate control points and deletes them in the synthesis phase.     

Titanate Anodes for Sodium Ion Batteries

For reasons of cost and supply security issues, there is growing interest in the development of rechargeable sodium ion batteries, particularly for large-scale grid storage applications. Like the much better known and technologically important lithium ion analogs, the devices operate by shuttling alkali metal cations between two host materials, which undergo insertion processes at different electrochemical potentials. A particular challenge for the sodium systems is identification of a suitable anode material due to the fact that sodium does not intercalate into graphite. Although several alternatives, including disordered carbons and alloys are being investigated, the most promising options at present lie with titanates, not in the least because of attractive characteristics such as low toxicity, ease of synthesis, wide availability, and low cost. A large variety of sodium titanate compounds can be prepared, many of which have tunnel or layered structures that can readily undergo reversible reductive intercalation reactions. A brief overview of the physical, structural, and electrochemical characteristics of several of the most promising materials for sodium-ion battery applications is given in this paper, and a comparison is made between the sodium and the lithium insertion behaviors. For some of these compounds, insertion of sodium occurs at unusually low potentials, a feature that has important implications for the design of high-energy sodium-ion systems.     

Macroporous silicon for high-capacitance devices using metal electrodes

In this paper, high-capacity energy storage devices based on macroporous silicon are demonstrated. Small footprint devices with large specific capacitances up to 100 nF/mm², and an absolute capacitance above 15 μF, have been successfully fabricated using standard microelectronics and MEMS techniques. The fabricated devices are suitable for high-density system integration. The use of 3-D silicon structures allows achieving a large surface to volume ratio. The macroporous silicon structures are fabricated by electrochemical etching of silicon. This technique allows creating large structures of tubes with either straight or modulated radial profiles in depth. Furthermore, a very large aspect ratio is possible with this fabrication method. Macroporous silicon grown this way permits well-controlled structure definition with excellent repeatability and surface quality. Additionally, structure geometry can be accurately controlled to meet designer specifications. Macroporous silicon is used as one of the electrodes over which a silicon dioxide insulating layer is grown. Several insulator thicknesses have been tested. The second capacitor electrode is a solid nickel filling of the pores prepared by electroplating in a low-temperature industry standard process. The use of high-conductivity materials allows reaching small equivalent series resistance near 1 Ω. Thanks to these improvements, the presented devices are capable of operating up to 10 kHz.

PACS

84.32.Tt; 81.15.Pq; 81.05.Rm     

Te-seeded growth of few-quintuple layer Bi2Te3 nanoplates

We report on a Te-seeded epitaxial growth of ultrathin Bi2Te3 nanoplates （down to three quintuple layers （QL）） with large planar sizes （up to tens of micrometers） through vapor transport. Optical contrast has been systematically investigated for the as-grown Bi2Te3 nanoplates on the SiO2/Si substrates, experimentally and computationally. The high and distinct optical contrast provides a fast and convenient method for the thickness determination of few-QL Bi2Te3 nanoplates. By aberration-corrected scanning transmission electron microscopy, a hexagonal crystalline structure has been identified for the Te seeds, which form naturally during the growth process and initiate an epitaxial growth of the rhombohedral- structured Bi2Te3 nanoplates. The epitaxial relationship between Te and Bi2T% is identified to be perfect along both in-plane and out-of-plane directions of the layered nanoplate. Similar growth mechanism might be expected for other bismuth chalcogenide layered materials.     

Comparison of two techniques for reliable characterization of thin metal-dielectric films

In the present study we determine the optical parameters of thin metal-dielectric films using two different characterization techniques based on nonparametric and multiple oscillator models. We consider four series of thin metal-dielectric films produced under various deposition conditions with different optical properties. We compare characterization results obtained by nonparametric and multiple oscillator techniques and demonstrate that the results are consistent. The consistency of the results proves their reliability.     

Ellipsometric study of thermally induced redistribution and crystallization of Ge in Ge:SiO2 mixture layers

Mixture layers of Ge:SiO₂ of 40:60 mol% respectively, have been prepared by co-sputtering. The thermally induced change of optical properties of the layers was studied by variable angle spectroscopic ellipsometry. The mixture was modelled as an unknown material with optical constants described by multiple oscillators. The optical parameters determined from ellipsometric measurements can be well correlated with structural changes in the mixture. The results indicate that Ge in the mixture deposited or annealed up to 600 °C is in an amorphous state and it redistributes with increase of temperature, changing refractive index through the layer. The crystallization starts between 600 and 650 °C, at first next to the substrate. Crystallites size grows with temperature. Results were compared with findings of grazing incidence wide angle X-ray scattering measurements and a good agreement was found. Ellipsometry has been shown to be an appropriate non-invasive technique for characterization of this kind of layers.     

The GWP-Chart: An environmental tool for guiding urban planning processes. Application to concrete sidewalks

The systematized study of urban morphology has led to the development of integrated tools based on the knowledge of the relation between physical density and urban form. These tools do help planners and decision makers; however, environmental data is rarely included in them.This paper presents the GWP-Chart, a method that combines urban planning tools with environmental data, obtained through the use of the life cycle assessment (LCA) results. In order to explain its use, three urban fabrics have been selected. According to their morphology and their ground space index (GSI) and public space ratio (PSR) values, the contribution of the sidewalk subsystem to the global impact per square meter of urban development can be quantified and communicated.The GWP-Chart is applicable to all types of urban fabrics and scales (street or square, island, fabric or district), as well as adaptable to any urban infrastructure or subsystem and can be extended to other environmental impacts. Its advantages lie in its accurateness, adaptability and ease of interpretation.