Stress-assisted crystallisation in anodic titania

The relationship between the microstructural and internal stress evolution during Ti anodising is discussed. Samples anodised galvanostatically to 12 V and 40 V, corresponding to different stages of the internal stress evolution, were examined by in-plane and cross-section transmission electron microscopy. Electron diffraction patterns have been complemented with stoichiometry data obtained from energy loss near edge structure spectra. The sample anodised to 40 V was observed to consist of two regions, with a crystallised inner region adjacent to the metal/oxide interface. Crystallisation of this region is associated with the presence of large compressive internal stresses which build up during anodising up to 12 V.     

The effect of silicon, aluminium and phosphor on the dynamic behavior and phenomenological modelling of multiphase TRIP steels

Multiphase TRansformation Induced Plasticity (TRIP) steels combine excellent ductility and high strength, making them ideally suited for shock absorbing parts in the automotive industry. When designing structures for impact, an understanding of the mechanical properties of materials under high strain rate conditions is essential. An extensive experimental program using a split Hopkinson tensile bar set-up was established in an effort to investigate the dynamic properties of various TRIP steel grades. Four different TRIP steels are described with varying contents of the alloying elements silicon, aluminium and phosphor. Moreover, several phenomenological models describing the strain rate and temperature-dependent mechanical behaviour are validated. TRIP steel grades in which aluminium is the main alloying element show high elongation values, whereas a high silicon content results in an increase in strength. The widely used Johnson-Cook model can describe the behaviour of TRIP steels and provides the opportunity to study its material and structural response.     

Epidural anesthesia impairs both central and peripheral thermoregulatory control during general anesthesia

BACKGROUND: The authors tested the hypotheses that: (1) the vasoconstriction threshold during combined epidural/general anesthesia is less than that during general anesthesia alone; and (2) after vasoconstriction, core cooling rates during combined epidural/general anesthesia are greater than those during general anesthesia alone. Vasoconstriction thresholds and heat balance were evaluated under controlled circumstances in volunteers, whereas the clinical importance of intraoperative thermoregulatory vasoconstriction was evaluated in patients. METHODS: Five volunteers were each evaluated twice. On one of the randomly ordered days, epidural anesthesia (approximately T9 dermatomal level) was induced and maintained with 2-chloroprocaine. On both study days, general anesthesia was induced and maintained with isoflurane (0.7% end-tidal concentration), and core hypothermia was induced by surface cooling and continued for at least 1 h after fingertip vasoconstriction was observed. Patients undergoing colorectal surgery were randomly assigned to combined epidural/enflurane anesthesia (n = 13) or enflurane alone (n = 13). In appropriate patients, epidural anesthesia was maintained by an infusion of bupivacaine. The core temperature that triggered fingertip vasoconstriction identified the threshold. RESULTS: In the volunteers, the vasoconstriction threshold was 36.0 +/- 0.2 degrees C during isoflurane anesthesia alone, but significantly less, 35.1 +/- 0.7 degrees C, during combined epidural/isoflurane anesthesia. Cutaneous heat loss and the rates of core cooling were similar 30 min before vasoconstriction with and without epidural anesthesia. In the 30 min after vasoconstriction, heat loss decreased 33 +/- 13 W when the volunteers were given isoflurane alone, but only 8 +/- 16 W during combined epidural/isoflurane anesthesia. Similarly, the core cooling rates in the 30 min after vasoconstriction were significantly greater during combined epidural/isoflurane anesthesia (0.8 +/- 0.2 degrees C/h) than during isoflurane alone (0.2 +/- 0.1 degrees C/h). In the patients, end-tidal enflurane concentrations were slightly, but significantly, less in the patients given combined epidural/enflurane anesthesia (0.6 +/- 0.2% vs. 0.8 +/- 0.2%). Nonetheless, the vasoconstriction threshold was 34.5 +/- 0.6 degrees C in the epidural/enflurane group, which was significantly less than that in the other patients, 35.6 +/- 0.8 degrees C. When the study ended after 3 h of anesthesia, patients given combined epidural/enflurane anesthesia were 1.2 degrees C more hypothermic than those given general anesthesia alone. The rate of core cooling during the last hour of the study was 0.4 +/- 0.2 degrees C/h during combined epidural/enflurane anesthesia, but only 0.1 +/- 0.3 degrees C/h during enflurane alone. CONCLUSIONS: These data indicate that epidural anesthesia reduces the vasoconstriction threshold during general anesthesia. Furthermore, the markedly reduced rate of core cooling during general anesthesia alone illustrates the importance of leg vasoconstriction in maintaining core temperature.     

A Novel Technology for Natural Gas Conversion by Means of Integrated Oxidative Coupling and Dry Reforming of Methane

A novel process concept for the oxidative coupling of methane followed by the oligomerization to liquids has been developed within the frame of the EU integrated project OCMOL. This technology is based on process intensification principles via cutting‐edge structured microreactor technology. It is also a fully integrated industrial process through the re‐use and the recycling of by‐products, in particular CO₂, at every process stage. The focus of this contribution is on the reaction engineering aspects of the core steps, i.e., catalysts, kinetics and reactor design for the methane coupling and reforming.     

Microbially mediated phosphine emission

There is still a lot of controversy in literature concerning the question whether a biochemical system exists enabling micro-organisms to reduce phosphate to phosphine gas. The search for so-called 'de novo synthesised' phosphine is complicated by the fact that soils, slurries, sludges, etc., which are often used as inocula, usually contain matrix bound phosphine (MBP). Matrix bound phosphine is a general term used to indicate non-gaseous reduced phosphorus compounds that are transformed into phosphine gas upon reaction with bases or acids. A study was carried out to compare the different digestion methods, used to transform matrix bound phosphine into phosphine gas. It was demonstrated that caustic and acidic digestion methods should be used to measure the matrix bound phosphine of the inoculum prior to inoculation to avoid false positive results concerning de novo synthesis. This is especially true if anthropogenically influenced inocula possibly containing minute steel or aluminium particles are used. The comparative study on different digestion methods also revealed that the fraction of phosphorus in mild steel, converted to phosphine during acid corrosion depended on the temperature. Following these preliminary studies, anaerobic growth experiments were set up using different inocula and media to study the emission of phosphine gas. Phosphine was detected in the headspace gases and its quantity and timeframe of emission depended on the medium composition, suggesting microbially mediated formation of the gas. The amount of phosphine emitted during the growth experiments never exceeded the bound phosphine present in inocula, prior to inoculation. Hence, de novo synthesis of phosphine from phosphate could not be demonstrated. Yet, microbially mediated conversion to phosphine of hitherto unknown reduced phosphorus compounds in the inoculum was evidenced.     

Detection and Localization of Delaminations in Thin Carbon Fiber Reinforced Composites with the Ultrasonic Polar Scan

In this paper, the hybrid compliance-stiffness matrix method for simulating wave propagation in (delaminated) multilayered media with viscoelastic anisotropy has been confronted with high-quality amplitude and phase experiments on delaminated composites, obtained using the ultrasonic polar scan setup (UPS) in transmission by considering harmonic as well as pulsed ultrasound. Results are presented for multiple thin carbon/epoxy laminates with an artificial edge delamination induced by a foil insert, showing a good agreement between experimental recording and numerical modeling. The obtained results further reveal the feasibility of the harmonic UPS to detect and even locate the depth-position of multiple delaminations in fiber reinforced composites. Considering that the harmonic UPS method does not rely on the detection of different echoes like the classical C-scan, but rather expounds the conditions for efficient stimulation of guided waves in the solid, the method is found to be highly suited for inspecting thin composite materials for the presence of delaminations.     

Analysis of DNA Replication by Optical Mapping in Nanochannels

DNA replication is essential to maintain genome integrity in S phase of the cell division cycle. Accumulation of stalled replication forks is a major source of genetic instability, and likely constitutes a key driver of tumorigenesis. The mechanisms of regulation of replication fork progression have therefore been extensively investigated, in particular with DNA combing, an optical mapping technique that allows the stretching of single molecules and the mapping of active region for DNA synthesis by fluorescence microscopy. DNA linearization in nanochannels has been successfully used to probe genomic information patterns along single chromosomes, and has been proposed to be a competitive alternative to DNA combing. Yet this conjecture remains to be confirmed experimentally. Here, two complementary techniques are established to detect the genomic distribution of tracks of newly synthesized DNA in human cells by optical mapping in nanochannels. Their respective advantages and limitations are compared, and applied them to detect deregulations of the replication program induced by the antitumor drug hydroxyurea. The developments here thus broaden the field of applications accessible to nanofluidic technologies, and can be used in the future as part for molecular diagnostics in the context of high throughput cancer drug screening.     

Sources of Inter-Firm Heterogeneity in Accessing Knowledge-Creation Benefits Within Technology Clusters

We build on recent literature to highlight the distinction between knowledge-diffusion and knowledge-creation benefits of technology clustering and argue that firms located in technology clusters will have differential access to the latter. To explain the antecedents of such differential access, we first argue that clustering gives rise to three knowledge-creation benefits: easier identification of potential knowledge partners with complementary knowledge, easier initiation of knowledge partnerships and increased effectiveness of knowledge partnerships. Subsequently, we develop a conceptual model and propositions that focus on a cluster firm's awareness of knowledge assets inside the cluster, attractiveness as a knowledge partner and ability to benefit from knowledge partnerships to explain differential access by firms to these three knowledge-creation benefits that clustering provides. This study highlights the theoretical significance of distinguishing externality-type benefits of technology clustering from benefits that firms need to actively pursue, and discusses implications for firms' location decisions.     

Visualization of a lost painting by Vincent van Gogh using synchrotron radiation based X-ray fluorescence elemental mapping

Vincent van Gogh (1853-1890), one of the founding fathers of modern painting, is best known for his vivid colors, his vibrant painting style, and his short but highly productive career. His productivity is even higher than generally realized, as many of his known paintings cover a previous composition. This is thought to be the case in one-third of his early period paintings. Van Gogh would often reuse the canvas of an abandoned painting and paint a new or modified composition on top. These hidden paintings offer a unique and intimate insight into the genesis of his works. Yet, current museum-based imaging tools are unable to properly visualize many of these hidden images. We present the first-time use of synchrotron radiation based X-ray fluorescence mapping, applied to visualize a woman's head hidden under the work Patch of Grass by Van Gogh. We recorded decimeter-scale, X-ray fluorescence intensity maps, reflecting the distribution of specific elements in the paint layers. In doing so we succeeded in visualizing the hidden face with unprecedented detail. In particular, the distribution of Hg and Sb in the red and light tones, respectively, enabled an approximate color reconstruction of the flesh tones. This reconstruction proved to be the missing link for the comparison of the hidden face with Van Gogh's known paintings. Our approach literally opens up new vistas in the nondestructive study of hidden paint layers, which applies to the oeuvre of Van Gogh in particular and to old master paintings in general.     

Healing Effect of Controlled Anti‐Electromigration on Conventional and High‐Tc Superconducting Nanowires

The electromigration process has the potential capability to move atoms one by one when properly controlled. It is therefore an appealing tool to tune the cross section of monoatomic compounds with ultimate resolution or, in the case of polyatomic compounds, to change the stoichiometry with the same atomic precision. As demonstrated here, a combination of electromigration and anti‐electromigration can be used to reversibly displace atoms with a high degree of control. This enables a fine adjustment of the superconducting properties of Al weak links, whereas in Nb the diffusion of atoms leads to a more irreversible process. In a superconductor with a complex unit cell (La_2?x Ce_x CuO₄), the electromigration process acts selectively on the oxygen atoms with no apparent modification of the structure. This allows to adjust the doping of this compound and switch from a superconducting to an insulating state in a nearly reversible fashion. In addition, the conditions needed to replace feedback controlled electromigration by a simpler technique of electropulsing are discussed. These findings have a direct practical application as a method to explore the dependence of the characteristic parameters on the exact oxygen content and pave the way for a reversible control of local properties of nanowires.