Long-term testing and applications of high-stress MV EPR cables

High-stress design 35-kV ethylene propylene rubber (EPR)-insulated cables with 1.14-mm (45-mil) wall reduction have been in service for more than ten years. In the mid 1990s, an extensive cable testing program was initiated to demonstrate that high-stress designs up to 4 kV/mm (101.6 V/mil) exhibit a significant electrical and mechanical safety margin to operate on typical utility network systems. Investigations were also undertaken to demonstrate the suitability of accessories for high-stress designs. This paper will present the results of six-year, long-term wet electrical testing conducted to demonstrate that with proper design, the aging performance of standard wall and high-stress design cables provide satisfactory results and suitable performance for the intended application. Additionally, utility field experience is presented on 35- and 15-kV cables operating at high stress. The experience for these 15-kV medium-voltage EPR cable designs employ the highest recommended stress for cables of this class, as well as taking into account the complete system performance.     

A neural network control system with parallel adaptive enhancementsapplicable to nonlinear servomechanisms

In this paper, we present a technique for using an additional parallel neural network to provide adaptive enhancements to a basic fixed neural network-based nonlinear control system. This proposed parallel adaptive neural network control system is applicable to nonlinear dynamical systems of the type commonly encountered in many practical position control servomechanisms. Properties of the controller are discussed, and it is shown that if Gaussian radial basis function networks are used for the additional parallel neural network, uniformly stable adaptation is assured and the approximation error converges to zero asymptotically. In the paper, the effectiveness of the proposed parallel adaptive neural network control system is demonstrated in real-time implementation experiments for position control in a servomechanism with asymmetrical loading and changes in the load     

XIV. Yeast sequencing reports. Sequence of MKT1, needed for propagation of M2 satellite dsRNA of the L-A virus of Saccharomyces cerevisiae

MKT1 is required for m aintenance of K₂ above 30°C in strains with the L-A-HN variant of the L-A double-stranded RNA virus of Saccharomyces cerevisiae. We report that MKT1 encodes a 92 979 Da protein with serine-rich regions and the retroviral protease signature, DTG, but with no substantial homology to proteins presently in the databases. This sequence is available from GenBank under Accession Number U09129.     

Tabletability of Maltodextrins and Acetaminophen Mixtures

Tabletability of five types of maltodextrin, a filler/binder excipient, was studied by testing their loading potentials with acetaminophen. The formulations consisted of excipient and acetaminophen at five different ratios and magnesium stearate at a 0.5% concentration. These mixtures were compacted employing an Integrated Compaction Research System at a constant punch velocity of 100 mm/sec. under varying applied pressures from 50 to 450 MPa. Compaction data were evaluated using the total work of compaction vs applied pressure plots whilst the post-compaction tests included the measurements of crushing force, disintegration time, and friability of the resulting tablets. Both the energy involved during the compaction of a formulation and the crushing force values of the resulting tablets decreased as the amount of the maltodextrin in a formulation was reduced. Maltodextrins exhibited adequate binding potential at acetaminophen drug loading levels of only up to twenty-five percent. The disintegration times of the tablets containing maltodextrins were generally prolonged and this was found to be due to the formation of a “gel” layer around the tablet which formed on immersion into water. The tabletability of maltodextrins were also compared to that of Fast-Flo lactose, and the compactability of these excipients were found to be similar.     

Describing collaborative forms: a profile of the team-writingprocess

The paper examines collaborative writing practices students in the Air Force Institute of Technology's Graduate School of Logistics and Acquisition Management use to produce team-authored theses. In analyzing how student writing teams plan, execute, and assess writing activities, the researchers identify and describe some of the forms that collaboration takes, thereby successfully connecting their work within a broader research continuum concerning collaborative writing, particularly when applied in academic settings     

On the capacity of a cellular CDMA system

It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity     

A device to measure the cross-sectional area of soft connectivetissues

A device has been designed and fabricated to measure the cross-sectional area of soft connective tissues ex vivo. It consists of two displacement transducers; one sensing tissue thickness and the other sensing width. Outputs are recorded (via an analog to digital interface) using a personal computer. Numerical integration of a thickness versus width plot computes cross-sectional area. This plot also provides a quality check of acquired data. This device has been successfully used in biomechanical studies of rabbit patellar tendons, rat medial collateral ligaments, and dissected specimens of human fascia.     

Electrical and optical feedback in an InGaAs/InP light-amplifyingoptical switch (LAOS)

A circuit model for optical and electrical feedback has been developed to investigate the cause of negative differential resistance (NDR) switching in a series connected heterojunction phototransistor (HPT) light-emitting diode (LED) device. The model considers optical feedback from the light generated in the LED, electrical feedback from the holes thermally emitted over the LED cladding layer, nonlinear gain of the HPT, the Early effect, and leakage resistance. The analysis shows that either electrical or optical feedback can be the dominant cause for the NDR, depending upon their relative strengths. The NDR observed in the devices was caused primarily by electrical feedback since the optical feedback is weak. For low input power, avalanche breakdown appears to initiate the NDR in the devices although avalanching alone cannot cause NDR     

The analysis of solvation in ionic liquids and organic solvents using the Abraham linear free energy relationship

The contentions made in an earlier paper [J Chem Technol Biotechnol 80 : 133–137 (2005)] that the coefficients of the Abraham solvation equation do not provide meaningful information on the molecular properties of ionic liquid solvents is refuted. The objections noted in the earlier paper disappear when the solvation equation model is correctly applied to the experimental data. It is further shown that the coefficients of the Abraham solvation equations can be used to characterize ionic liquids and can be used to select solvents for the solubility of gaseous solutes. Copyright © 2006 Society of Chemical Industry     

The TMS320C30 floating-point digital signal processor

The 320C30 is a fast processor with a large memory space and floating-point-arithmetic capabilities. The authors describe the 320C30 architecture in detail, discussing both the internal organization of the device and the external interfaces. They also explain the pipeline structure, addressing software-related issues and constructs, and examine the development tools and support. Finally, they present examples of applications. Some of the major features of the 320C30 are: a 60-ns cycle time that results in execution of over 16 million instructions per second (MIPS) and over 33 million floating-point operations per second (Mflops); 32-bit data buses and 24-bit address buses for a 16M-word overall memory space; dual-access, 4 K×32-bit on-chip ROM and 2 K×32-bit on-chip RAM; a 64×32-bit program cache; a 32-bit integer/40-bit floating-point multiplier and ALU; eight extended-precision registers, eight auxiliary registers, and 23 control and status registers; generally single-cycle instructions; integer, floating-point, and logical operation; two- and three-operand instructions; an on-chip DMA controller; and fabrication in 1-μm CMOS technology and packaging in a 180-pin package. These facilitate FIR (finite impulse response) and IIR (infinite impulse response) filtering, telecommunications and speech applications, and graphics and image processing applications