Efficient and 1,8-diiodooctane-free ternary organic solar cells fabricated via nanoscale morphology tuning using small-molecule dye additive

The ternary strategy for incorporating multiple photon-sensitive components into a single junction has emerged as an effective method for optimizing the nanoscale morphology and improving the device performance of organic solar cells (OSCs).In this study,efficient and stable ternary OSCs were achieved by introducing the small-molecule dye (5E,5'E)-5,5'-(4',4″-(1,2-diphenylethene-1,2-diyl)bis(biphenyl-4',4-diyl))bis(methan-1-yl-1-ylidene)bis(3-ethyl-2-thioxothia zolidin-4-one) (BTPERn) into poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiopheneco-3-fluorothieno[3,4-b]thiophene-2-carboxylate] (PTB7-Th):[6,6]-phenyl C71 butyric acid methyl ester (PC71BM) blend films processed using a 1,8-diiodooctane (DIO)-free solvent.The incorporation of BTPE-Rn enhanced the short-circuit current density and fill factor of the ternary OSCs compared with those of binary OSCs.An investigation of the optical,electronic,and morphological properties of the ternary blends indicated that the third component of BTPE-Rn not only promoted the photon utilization of blends through the energy-transfer process but also improved the electron mobility of the blends owing to the fullerene-rich nanophase optimization.More importantly,this ternary strategy of utilizing a small-molecule dye to replace the photounstable DIO additive enhanced the operational stability of the OSCs.     

Gold nanoparticle-based paper sensor for ultrasensitive and multiple detection of 32 (fluoro)quinolones by one monoclonal antibody

For rapid and simultaneous detection of (fluoro)quinolones, a broadly specific monoclonal antibody (mAb) that recognizes 32 (fluoro)quinolone antibiotics was prepared using a mixture of a norfloxacin derivative and a sarfloxacin derivative as the hapten. An immunochromatographic strip based on gold nanoparticles (AuNPs) was then assembled with goat anti-mouse antibody and antigen (sarfloxacin coupled to ovalbumin), used to form the C line and T line, respectively. This antigen competes with the (fluoro)quinolones in a sample incubated with mAbs labeled with AuNPs. The strip can detect 32 (fluoro)quinolones including oxolinic acid, nalidixic acid, miloxacin, pipemidic acid, piromidic acid, rosoxacin, cinoxacin, norfloxacin, pefloxacin, lomfloxacin, enofloxacin, fleroxacin, ciprofloxacin, enrofloxacin, dafloxacin, orbifloxacin, sparfloxacin, gemifloxacin, besifloxacin, balofloxacin, gatifloxacin, moxifloxacin, nadifloxacin, ofloxacin, marbofloxacin, flumequine, pazufloxacin, prulifloxacin, sarafloxacin, difloxacin, trovafloxacin, and tosufloxacin in milk within 10 min with the naked eye. The cut-off values of the strip range from 1 to 100 ng/mL and the limits of detection are 0.1–10 ng/mL. The strip does not cross-react with antibiotics including tetracycline, sulfamethazine, ampicillin, erythromycin, aflatoxin B1, or gentamicin. In short, this immunochromatographic strip is a very useful tool for the primary screening of (fluoro)quinolones in milk.

Open image in new window

     

Plasmon enhancement for Vernier coupled single-mode lasing from ZnO/Pt hybrid microcavities

It is essential to develop a single mode operation and improve the performance of lasing in order to ensure practical applicability of microlasers and nanolasers.In this paper,two hexagonal microteeth with varied nanoscaled air-gaps of a ZnO microcomb are used to construct coupled whispering-gallery cavities.This is done to achieve a stable single mode lasing based on Vernier effect without requiring any complicated or sophisticated manipulation to achieve positioning with nanoscale precision.Optical gain and the corresponding ultraviolet lasing performance were improved greatly through coupling with localized surface plasmons of Pt nanoparticles.The ZnO/Pt hybrid microcavities achieved a seven-fold enhancement of intensity of single mode lasing with higher sidemode suppression ratio and lower threshold.The mechanism that led to this enhancement has been described in detail.     

Comparative analysis of the performance of a novel U-shaped ‘chasing-overtaking’ production line

Fluctuations in market demands, increased mobility of workers and changing employment practices as well as companies’ increased respect for individual differences of workers have led to the phenomenon that workers with large efficiency differences work together in the same production line in manufacturing companies. In a traditional travelling production line (TrPL), low-efficiency workers can block the work of higher efficiency workers. To increase the production capacity of a travelling line composed of workers with different efficiencies, a chasing-overtaking mechanism was established and used to achieve line production capacity and efficiency improvement. A formula to calculate the production capacity of two workers with different efficiencies was derived and validated. A simulation performed to analyse the differences between the ‘chasing-overtaking’ production line (COPL), TrPL and the classic ‘bucket brigade’ production line (BBPL) with respect to production capacity, working time utilisation and equipment utilisation demonstrated that the COPL provides good production capacity and adaptability to worker differences. Finally, the statistical analysis verified that the COPL has a higher production capacity, average worker working hour utilisation rate and equipment utilisation rate than the BBPL and TrPL.     

A performance analytical model of automated material handling system for semiconductor wafer fabrication system

To effectively analyse and evaluate the performances of closed-loop automated material handling system (AMHS) with shortcut and blocking in semiconductor wafer fabrication system, a modified Markov chain model (MMCM) has been proposed. The system characteristics, such as vehicle blockage and system’s shortcut configuration, are well considered in the MMCM. The state space explosion problem and computational challenge due to the increase of AMHS scale can be effectively eliminated. With production data from Interbay material handling system of a 300-mm semiconductor wafer fabrication line, the proposed MMCM is compared with simulation analysis model. The results demonstrate that the proposed MMCM is an effective modelling methodology for AMHS’s performance analysis at system design stage.     

Identification of Pivotal Causes and Spreaders in the Time‐Varying Fault Propagation Model to Improve the Decision Making under Abnormal Situation

Under abnormal conditions, timely and effective decisions of system recovery and protective measures are of great significance for safety‐critical systems. The knowledge of the roles that network nodes play in the spreading process is crucial for developing efficient maintenance decisions; for singling out and preferential control, the ‘pivotal spreaders’ may be a way to maximize the chances to timely hinder the fault pervasion. Inspired by the inhomogeneous topological nature of a complex fault propagation network, this study is devoted to exploring the spreading capabilities of nodes regarding both structural connectivity and causal influence strength, so as to provide decisions of preferential recovery actions under specific fault scenarios. Specifically, the dynamic betweenness centrality and nonsymmetrical entropy are incorporated to adaptively measure the system‐wide fault diffusion risk of a set of controllable fault events. In order to model the dynamics and uncertainties involved in the complex fault spreading process, we introduce the model of a dynamic uncertain causality graph, based on which solutions of time‐varying structure decomposition and causality reduction are adopted to improve the reasoning efficiency. Verification experiments consisting of simulated calculation cases and generator faults of a nuclear power plant show empirically the effectiveness and applicability of this method in large‐scale engineering practice. Copyright © 2014 John Wiley & Sons, Ltd.     

Criticality Analysis for Maintenance Purposes: A Study for Complex In‐service Engineering Assets

The purpose of this paper is to establish a basis for a criticality analysis, considered here as a prerequisite, a first required step to review the current maintenance programs, of complex in‐service engineering assets. Review is understood as a reality check, a testing of whether the current maintenance activities are well aligned to actual business objectives and needs. This paper describes an efficient and rational working process and a model resulting in a hierarchy of assets, based on risk analysis and cost–benefit principles, which will be ranked according to their importance for the business to meet specific goals. Starting from a multicriteria analysis, the proposed model converts relevant criteria impacting equipment criticality into a single score presenting the criticality level. Although detailed implementation of techniques like Root Cause Failure Analysis and Reliability Centered Maintenance will be recommended for further optimization of the maintenance activities, the reasons why criticality analysis deserves the attention of engineers and maintenance and reliability managers are precisely explained here. A case study is presented to help the reader understand the process and to operationalize the model. Copyright © 2015 John Wiley & Sons, Ltd.