The Potential Role of Lycopene for the Prevention and Therapy of Prostate Cancer: From Molecular Mechanisms to Clinical Evidence

Lycopene is a phytochemical that belongs to a group of pigments known as carotenoids. It is red, lipophilic and naturally occurring in many fruits and vegetables, with tomatoes and tomato-based products containing the highest concentrations of bioavailable lycopene. Several epidemiological studies have linked increased lycopene consumption with decreased prostate cancer risk. These findings are supported by in vitro and in vivo experiments showing that lycopene not only enhances the antioxidant response of prostate cells, but that it is even able to inhibit proliferation, induce apoptosis and decrease the metastatic capacity of prostate cancer cells. However, there is still no clearly proven clinical evidence supporting the use of lycopene in the prevention or treatment of prostate cancer, due to the only limited number of published randomized clinical trials and the varying quality of existing studies. The scope of this article is to discuss the potential impact of lycopene on prostate cancer by giving an overview about its molecular mechanisms and clinical effects.     

Tuning of defects in ZnO nanorod arrays used in bulk heterojunction solar cells

With particular focus on bulk heterojunction solar cells incorporating ZnO nanorods, we study how different annealing environments (air or Zn environment) and temperatures impact on the photoluminescence response. Our work gives new insight into the complex defect landscape in ZnO, and it also shows how the different defect types can be manipulated. We have determined the emission wavelengths for the two main defects which make up the visible band, the oxygen vacancy emission wavelength at approximately 530 nm and the zinc vacancy emission wavelength at approximately 630 nm. The precise nature of the defect landscape in the bulk of the nanorods is found to be unimportant to photovoltaic cell performance although the surface structure is more critical. Annealing of the nanorods is optimum at 300°C as this is a sufficiently high temperature to decompose Zn(OH)₂ formed at the surface of the nanorods during electrodeposition and sufficiently low to prevent ITO degradation.     

New Biofuel Alternatives: Integrating Waste Management and Single Cell Oil Production

Concerns about greenhouse gas emissions have increased research efforts into alternatives in bio-based processes. With regard to transport fuel, bioethanol and biodiesel are still the main biofuels used. It is expected that future production of these biofuels will be based on processes using either non-food competing biomasses, or characterised by low CO₂ emissions. Many microorganisms, such as microalgae, yeast, bacteria and fungi, have the ability to accumulate oils under special culture conditions. Microbial oils might become one of the potential feed-stocks for biodiesel production in the near future. The use of these oils is currently under extensive research in order to reduce production costs associated with the fermentation process, which is a crucial factor to increase economic feasibility. An important way to reduce processing costs is the use of wastes as carbon sources. The aim of the present review is to describe the main aspects related to the use of different oleaginous microorganisms for lipid production and their performance when using bio-wastes. The possibilities for combining hydrogen (H₂) and lipid production are also explored in an attempt for improving the economic feasibility of the process.     

Tetraacylgermanes as highly efficient photoinitiators for visible light cured dimethacrylate resins and dental composites

Tetrabenzoylgermane 1 and various substituted tetrabenzoylgermanes 2 – 7 were investigated as visible light (VL) photoinitiators (PIs) for dental dimethacrylate resins and dimethacrylate‐based composites. The tetrabenzoylgermanes 1 – 7 show a very strong VL absorption between 400 and 450 nm. Substituents on the benzoyl chromophore strongly influence their properties such as melting point, solubility, absorption behavior, or PI reactivity. A good photobleaching behavior and a very high reactivity as VL PI was found in photo‐differential scanning calorimeter experiments for selected tetrabenzoylgermanes. Composite pastes containing only ～0.1 wt % of Ge‐PI exhibited a sufficient photocuring due to the high PI‐reactivity of the tetraacylgermanes. Among the investigated germane PIs, tetrakis(2‐methylbenzoyl)germane 2 shows the best performance as VL PI for restorative composites and enables the composites to be photocured using an LED with an emission maximum of 500 nm. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46115.     

Chemical Fertility Signaling in Termites: Idiosyncrasies and Commonalities in Comparison with Ants

Termites evolved eusociality independently from social Hymenoptera. As a common trait, reproductive monopoly is maintained through chemical communication. The queen (and in termites also a king) prevents workers from reproduction by conveying their reproductive status. In termites all soldiers are sterile, but workers’ potential to reproduce differs between species. It ranges from totipotency in wood-dwelling lower termites where workers are a transient stage from which all other castes develop, to sterile workers in some higher termites. Intermediate are species in which workers can develop into replacement sexuals within the nest but not into winged sexuals. I summarize the patchy picture about fertility signaling that we currently have for termites, pointing also to potential conflicts over reproduction that differ from those in social Hymenoptera. Recent findings imply that, similar to many social Hymenoptera, wood-dwelling termites that live in confined nests use long-chain cuticular hydrocarbons (CHCs) as fertility signals. Yet other compounds are important as well, comprising proteinaceous secretions and especially volatiles. For a subterranean termite, two volatiles have been identified as primer pheromones that prevent reproductive differentiation of workers. It requires more data to test whether wood-dwelling termites use CHCs, while species with larger colonies and less confined nests use volatiles, or whether all species rely on multicomponent signals. Ultimately, we need more effort to model and test potential conflicts over reproduction between queens, kings and workers. Here results from social Hymenoptera cannot be transferred to termites as the latter are diploid and commonly inbred. This review illustrates promising future research avenues.     

The Acrylation of Glycerol: A Precursor to Functionalized Lipids

With the objective of expanding the number of functionalized lipids available, the reactive vinyl group of acrylic acid was introduced to triacylglycerol by esterification of glycerol. Didecanoylacryloylglycerol was synthesized from decanoic and acrylic acids and glycerol using K₂O as catalyst. 2 g (21.7 mmol) glycerol, 11.3 g (65.4 mmol) decanoic acid, 6.2 g (86.1 mmol) acrylic acid, 60 ml hexane, and 400 mg K₂O were added to 300-ml closed stainless steel reactor and maintained at 200 °C for 5 h. The resulting product, designated DDA, was isolated at about 40% yield based on the acylglycerol products. The other products included tridecanoylglycerol, diacryloyldecanoylglycerol, and the diacylglycerols of these acids. DDA was then converted to functionalized lipids by the Michael addition and Heck reaction. The Michael addition of thiophenol and 4-bromothiophenol yielded the corresponding linear thioethers whereas and Heck reaction products from bromobenzene and bromoanisole yielded triacylglycerols containing trans-cinnamic acid and trans-(4-methoxy)cinnamic acid, respectively.     

Molecular design of interfacial layers based on conjugated polythiophenes for polymer and hybrid solar cells

In the past two decades, bulk heterojunction organic photovoltaic (OPV) devices have emerged as attractive candidates for solar energy conversion due to their lightweight design and potential for low‐cost, high‐throughput, solution‐phase processability. Interfacial engineering is a proven efficient approach to achieve OPV devices with high power conversion efficiencies. This mini‐review provides an overview of the key structural considerations necessary when undertaking the molecular design of conjugated polyelectrolytes, for application as interfacial layers (ILs). The different roles of ILs are outlined, together with the advantages and disadvantages of competing classes of IL materials. Particular emphasis is placed on the design and synthesis of water‐soluble polythiophene‐based IL materials and the influence of their structural characteristics on their performance as a promising class of IL material. Finally, the challenges and opportunities for polythiophenes as IL materials for OPV devices and other solution‐processed solar cell technologies (e.g. perovskite solar cells) are discussed. © 2017 Society of Chemical Industry