How operators make use of wide-choice adaptable automation: observations from a series of experimental studies

The present paper is concerned with the design of adaptable automation. It analyses the aggregated data from five experiments (N = 154) to examine which automation levels operators prefer, how often they switch between them, and whether performance is associated with frequent switching or the automation levels being used. Using wide-choice adaptable automation (i.e. up to six levels were offered), the experiments were conducted using a PC-based simulation of a complex work environment. The results showed that about 95% of operators had a clearly preferred automation level, which they used for more than 50% of the time. They strongly preferred intermediate automation levels over levels at the higher and lower ends of the scale. Most operators switched rarely between levels and when they did, they usually made small adjustment rather than large changes. Several implications for the design of adaptable automation were derived from the empirical data.     

Rumination activity of dairy cows in the 24 hours before and after calving

Monitoring rumination behavior serves multiple purposes in feeding and herd management of dairy cows. The process of calving is a major event for cows, and a detailed understanding of alterations in behavioral patterns of animals in the time around calving is important in calving detection. The objective of this study was to describe the short-term changes in rumination patterns in dairy cows immediately before and after parturition. In total, 17 cows were fitted with rumination sensors that were able to monitor rumination time, number of rumination boli, and number of rumination jaw movements. Rumination time was decreased in the last 4 h antepartum and in the first 8 h postpartum. Cows stopped ruminating 123 ± 58 min (mean ± standard deviation) before calving and resumed ruminating 355 ± 194 min after calving. The number of rumination jaw movements and boli per day were decreased in the 24-h period postpartum. Rumination rate, the number of rumination jaw movements per rumination minute, and the number of boli per rumination minute changed little around calving. The calving event primarily influenced the duration and frequency of various rumination characteristics but not rumination intensity. Among detected characteristics, rumination time showed the greatest potential for monitoring of calving events.     

Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I

Synthetic patch materials currently in use have major limitations, such as high susceptibility to infections and lack of contractility. Biological grafts are a novel approach to overcome these limitations, but do not always offer sufficient mechanical durability in early stages after implantation. Therefore, a stabilising structure based on resorbable magnesium alloys could support the biological graft until its physiologic remodelling. To prevent early breakage in vivo due to stress of non-determined forming, these scaffolds should be preformed according to the geometry of the targeted myocardial region. Thus, the left ventricular geometry of 28 patients was assessed via standard cardiac magnetic resonance imaging (MRI). The resulting data served as a basis for a finite element simulation (FEM). Calculated stresses and strains of flat and preformed scaffolds were evaluated. Afterwards, the structures were manufactured by abrasive waterjet cutting and preformed according to the MRI data. Finally, the mechanical durability of the preformed and flat structures was compared in an in vitro test rig. The FEM predicted higher durability of the preformed scaffolds, which was proven in the in vitro test. In conclusion, preformed scaffolds provide extended durability and will facilitate more widespread use of regenerative biological grafts for surgical left ventricular reconstruction.     

Gas/liquid oxygen-transfer to flowing lead alloys

For the application of liquid lead or lead-bismuth eutectic as coolant in nuclear reactors, the concentration of dissolved oxygen, determining the compatibility with steels used as construction materials, is of critical importance. In general, oxygen has to be added continuously to the liquid metal, so as to compensate for consumption by oxide formation on the surface of the reactor components. A potential method of keeping the oxygen concentration in a favourable range is transferring oxygen from an oxygen-containing gas, which is investigated on the basis of the experience from operating a gas/liquid transfer device in the CORRIDA loop. Conclusions on oxygen transfer in industrial-scale systems are drawn.     

Partial oxidation of methane in hollow‐fiber membrane reactors based on alkaline‐earth metal‐free CO2‐tolerant oxide

The U‐shaped alkaline‐earth metal‐free CO₂‐stable oxide hollow‐fiber membranes based on (Pr_0.9La_0.1)₂(Ni_0.74Cu_0.21Ga_0.05)O_4+δ (PLNCG) are prepared by a phase‐inversion spinning process and applied successfully in the partial oxidation of methane (POM) to syngas. The effects of temperature, CH₄ concentration and flow rate of the feed air on CH₄ conversion, CO selectivity, H₂/CO ratio, and oxygen permeation flux through the PLNCG hollow‐fiber membrane are investigated in detail. The oxygen permeation flux arrives at approximately 10.5 mL/min cm² and the CO selectivity is higher than 99.5% with a CH₄ conversion of 97.0% and a H₂/CO ratio of 1.8 during 140 h steady operation. The spent hollow‐fiber membrane still maintains a dense microstructure and the Ruddlesden‐Popper K₂NiF₄‐type structure, which indicates that the U‐shaped alkaline‐earth metal‐free CO₂‐tolerant PLNCG hollow‐fiber membrane reactor can be steadily operated for POM to syngas with good performance. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3587–3595, 2014     

Photoluminescence and electroluminescence imaging of perovskite solar cells

Fast camera‐based luminescence‐imaging measurements on perovskite solar cells are presented. The fundamental correlation between the luminescence intensity and the open circuit voltage predicted by the generalised Planck law is confirmed, enabling various quantitative methods for the detection of efficiency‐limiting defects to be applied to this new cell structure. Interstinegly, it is found that this fundamental correlation is valid only for light‐soaked devices. Copyright © 2015 John Wiley & Sons, Ltd.     

Impact of Spatially Heterogeneous Trop-2 Expression on Prognosis in Oral Squamous Cell Carcinoma

Oral cancer often presents with aggressive behavior and a high risk of recurrence and metastasis. For oral squamous cell carcinoma (OSCC), which is the most frequent histological subtype, therapy strategies include surgery, radiation therapy, chemotherapy, immune checkpoint inhibitors, and EGFR inhibitors. Recently, a Trop-2 antibody-drug conjugate (ADC) has been approved in the United States of America for the treatment of advanced triple-negative breast cancer. However, this ADC has also been tested in other solid tumors including head & neck squamous cell carcinoma. The prognostic impact of Trop-2 has already been reported for several cancers. We studied the prognostic influence of Trop-2 protein expression on OSCC patients’ survival. The cohort comprised n = 229 OSCC patients with available archived tumor tissue and corresponding non-neoplastic oral mucosa tissue. Using immunohistochemistry, we investigated Trop-2 expression in both the central and peripheral regions of each tumor and in corresponding non-neoplastic oral mucosa. In patients suffering from OSCC with combined high central and low peripheral Trop-2 expression, five-year overall survival (OS) was 41.2%, whereas 55.6% of OSCC patients who presented lower central and/or higher peripheral tumoral Trop-2 expression were alive after five years (p = 0.075). In multivariate Cox regression, the expression pattern of high central tumoral and lower peripheral Trop-2 expression was significantly correlated with impaired OS (HR = 1.802, 95%-CI: 1.134–2.864; p = 0.013) and recurrence-free survival (RFS) (HR = 1.633, 95%-CI: 1.042–2.560; p = 0.033), respectively, when adjusting for co-variables. Hence, Trop-2 may serve as an independent prognostic biomarker in OSCC. In subsequent studies, the pathophysiological meaning of downregulated Trop-2 expression in the OSCC periphery has to be analyzed.     

Alkylthio-substituierte Bis(benzol-1,2-dithiolato)zinkate,Benzol-1,2-dithiole und -1,2-dithiolate – Edukte für Dibenzo[c,g](1,2,5,6)tetrathiocine und Benzo[c](1,2,3)-trithiole; Untersuchungen zu Benzodithieten und ortho-Dithiobenzochinonen

Alkylthiosubstituted Bis(benzene-1,2-dithiolato)zincates, Benzene-1,2-dithioles, and -1,2-dithiolates – Educts for Dibenzo[c,g](1,2,5,6)tetrathiocins, and Benzo[c](1,2,3)trithioles; Investigations on Benzodithietes and ortho-Dithiobenzochinones Using benzenehexathiolate 1 it is possible to synthesize alkylthio-substituted benzo-1,3-dithiole-2-thiones 2 , or -ones 3 and benzo-di(1,3-dithiole-2-thiones) 4 , or -ones 5 , resp., which were cleaved under basic conditions. The generated benzene-1,2-dithiolates 7 were isolated as benzene-dithiolato zincates 8 , benzene-1,2-dithioles 11 , and benzene-1-thiole-2-thiolates 10 . Dibenzo[c,g](1,2,5,6)-tetrathiocins 9 were synthesized by oxidation of 7 or 8 in good yields. For the per(methylthio)-substituted tetrathiocin 9a the twist conformation was proved by x-ray structure analysis. The tetrathiocin 9a was probably formed via the orthodithiobenzoquinone 13a . Photolysis of 3a at room temperature in solution led to 9a and tetrakis(methylthio)benzo[c] (1,2,3)trithiole 12a as the main product, which was also formed by irradiation of 9a . The trithioles 12 were formed from 8 by reaction with sulfur dichloride. 12a was investigated by x-ray structure analysis. ortho-Dithiobenzoquinone 13c can be claimed as an intermediate upon irradiation of benzo-1,3-dithiol-2-one 3c in an argon matrix at 10 K. Depending on the wavelength the equilibrium lies either on the side of dithiobenzoquinone 13c or benzodithiete 14c . The same is true for system 15/16 , which can be reached by flash vacuum pyrolysis of 3c .     

Microbes versus microbes: control of pathogens in the food chain

Foodborne illness continues as a considerable threat to public health. Despite improved hygiene management systems and increased regulation, pathogenic bacteria still contaminate food, causing sporadic cases of illness and disease outbreaks worldwide. For many centuries, microbial antagonism has been used in food processing to improve food safety. An understanding of the mode of action of this microbial antagonism has been gained in recent years and potential applications in food and feed safety are now being explored. This review focuses on the potential opportunities presented, and the limitations, of using microbial antagonism as a biocontrol mechanism to reduce contamination along the food chain; including animal feed as its first link. © 2014 Society of Chemical Industry