Measurement of Particulate Carbon in Atmospheric Aerosol in Helsinki

By means of a simple optical apparatus the levels and variations of concentrations of elemental carbon in particles were measured. Additionally, relations between variations of elemental carbon, lead, sulfate, total suspended particle, and nitrate concentrations were studied. Calibration was performed on real samples analyzed by a wet chemical method.     

The Role of the Oxygen Molecule in the Photolysis of Fullerenes

Experiments designed to clarify the role of molecular oxygen in the photolysis of fullerene are described. The formation of oxygen-fullerene adducts, both in fullerene solutions in various solvents and in micro-crystallites formed by evaporating these solutions, and their photolysis was studied under various experimental conditions. The results confirm that the role of oxygen in the photolysis process in these systems is ambivalent and highly dependent on the conditions under which the irradiation of the fullerenes occurs (wavelength and intensity of the photolyzing radiation, character of the solvent molecules, presence of additional molecules in the solvent-fullerene-oxygen system, etc.).     

A study on the restoration method of friction, wear and fatigue performance of remanufactured crankshaft

Crankshaft translates reciprocating linear piston motion into rotation in internal combustion engine. So it receives complex combination of stresses. Therefore, crankshaft remanufacturing process is designed thoroughly with special attention to fatigue and tribological performance. Experimental study is carried out in order to show that UNSM (ultrasonic nanocrystal surface modification) technology which will be used as final surface treatment after 0.2 mm depth surface grinding, could restore original fatigue strength and tribological performance. Furthermore the feasibility steady to replace conventional overlay welding in crankshaft remanufacturing process by UNSM (ultrasonic nanocrystal surface modification) technology is carried out. Effects of UNSM technology are established through rotary bending test, rolling contact fatigue (RCF) test and wear simulation test. The test specimen used SCM435 material of crankshaft and commercial bush. The test result showed fatigue limit improved by 30% and RCF life increased by 40% for UNSM treated specimen. And friction coefficient decreased by 24% and wear amount decreased by 85%.     

Kinetics of glucose decomposition in formic acid

Cellulose is abundantly available in the form of forestry and agricultural lignocellulosic residues. These residues offer the most potential source for the production of cellulosic glucose, which is a prerequisite for the sustainable production of glucose-based fuels and chemicals. Acid catalysis is one path to lignocellulosic glucose and further to its dehydration end products. Furthermore, many studied lignocellulose pretreatment methods for enzymatic hydrolysis are carried out in acidic conditions, in which the unwanted release of hemicellulose-based glucose and its further reactions to harmful end products are possible. Thus, in order to maximize glucose production from non-food cellulosic raw materials, data on the kinetics of cellulose decomposition and formation rates of end products are required. Glucose decomposition is a complex reaction system that has often been modelled with empirical, simplified models. In this study, a kinetic model was developed for glucose decomposition in formic acid solution. The experimentation was carried out in batch reactors at 180-220 °C in 5-20% (w/w) formic acid. The model developed relies on a mechanistic step through an unknown substance and gives excellent correspondence to the experimental data despite the pseudo-elementary nature of the model structure.     

Studies on Helium Liquids by Vibrating Wires and Quartz Tuning Forks

We present results of low-temperature experiments on dilute mixtures of ³He in ⁴He and on pure ³He, obtained by means of two kinds of mechanical oscillators immersed in the liquid sample: vibrating wires and quartz tuning forks. The helium sample was cooled either by adiabatic demagnetization of an immersed copper nuclear stage or by adiabatic melting of ⁴He in superfluid ³He. The measured effect of the surrounding fluid on the mechanical resonance of the oscillators is compared with existing theories. We also discuss resonances of second sound and the state of supersaturation, both observed by a tuning fork in helium mixtures.     

Analysis of regioisomers of triacylglycerols of northern currant seed oil by tandem mass spectrometry

Currant oils have special health properties due to their moderate contents of α‐linolenic, γ‐linolenic and stearidonic acids. The distribution of fatty acids (FA) in the triacylglycerols (TAG) may affect the beneficial effects. Seed oils of wild northern red currant (NRC) (Ribes spicatum L.) from Northern Finland and of wild alpine currant (AC) (R. alpinum L.) from the South‐West coast of Finland were investigated. The purified TAG were analysed by tandem mass spectrometry by applying the ammonia negative ion chemical ionisation – collision‐induced dissociation method. Molecular weight fractions rich in C18:3 FA and C18:4 FA were investigated. Of the total oil, the molecular weight species 54:7 (ACN:DB), 54:8 and 54:9 were more abundant in NRC than in AC, being 21.0%, 15.8%, 7.4% and 16.2%, 11.2%, 4.8%, respectively (p <0.05). The species 52:6 was more abundant in AC (3.1%) than in NRC (2.6%) (p <0.05). The preferential order of FA to be in the sn‐2 position in both berries was typically C18:1 > C18:2 > C18:4 > C18:3. No difference was observed between relative locations of C16:0 FA and C18:3 FA in either of the oils. Within the TAG consisting of FA combinations C18:3/C18:3/C18:1 (54:7), C18:1 was more preferentially in the sn‐2 position (p <0.05) in AC (93.2%) than in NRC (74.6%), and in the case of C18:3, the preference was vice versa. Within the molecular weight species 54:9, FA combination C18:4/C18:3/C18:2, linoleic acid preferentially occupied the secondary position (p <0.005) in both berries, and the proportion of the TAG regioisomer pair sn‐C18:3‐C18:4‐C18:2 + sn‐C18:2‐C18:4‐C18:3 was more abundant (30.2%) in NRC than in AC (15.3%). Within the TAG species 52:6, proportions of all the existing combinations, C16:0/C18:3/C18:3, C16:0/C18:4/C18:2 and C16:1/C18:3/C18:2, varied between the two berry species (p <0.005).     

The measurement of the piston velocity of a hydraulic actuator

The use of three types of transducers to measure the velocity of the piston shaft of a hydraulic actuator is investigated. The types of transducers are linear magnetic scale, magnetostrictive, and optical rotary encoder. Different methods of calculating the piston velocity from the position information are proposed, and the results of the test measurement are presented     

A Novel Environment Characterization Metric for Clustered MIMO Channels

In this work we introduce a novel metric for characterizing the double-directional propagation environment and use this metric to assess the performance of a SAGE parameter estimator for MIMO channels. Using the IlmProp, a geometry-based MIMO channel modeling tool, we construct synthetic channels for three different scenarios showing: (i) well separated clusters containing dense propagation paths, and single-bounce scattering; (ii) partly overlapping clusters containing widely spread propagation paths, and single-bounce scattering; (iii) unclustered multipath components (“rich scattering”), and double-bounce-only scattering. We model the scatterers and the receiver in the environment as fixed, but the transmitter as moving. The Initialization and Search-Improved SAGE (ISIS) estimation tool is used to extract the propagation paths from the constructed channels. Both true and estimated paths are fed to the new system-independent metric which genuinely reflects the structure of the channel and the compactness of the propagation paths. We use this metric to decide on the accuracy of the channel estimator. The results show a convincing agreement between true and estimated paths.     

Near-Infrared Laser-Induced Decomposition of C60 Dissolved in Toluene

In this paper we describe the efficient and substantial decomposition of C₆₀ in toluene solution, induced by moderate intensity (I = 20 - 55 MW cm^-2) near infrared (γ = 1064 nm) laser radiation. This behavior is surprising since both uncharged fullerene and toluene do not have any absorption bands at this wavelength. The decomposition efficiency and products are investigated with UV-Vis absorption spectrophotometry and high-performance liquid-chromatography (HPLC). Possible mechanisms of the fullerene decomposition are discussed.