Reel-to-reel inline atmospheric plasma deposition of hydrophobic coatings

Plasma deposition equipment was developed and installed at a pilot extrusion coating line for reel-to-reel substrates. Hexamethyldisiloxane was used as a siloxane precursor for the atmospheric plasma deposition of siloxane coatings on substrates of three different categories: paper, polyethylene-coated paper, and textile materials (woven cotton fabric and polypropylene nonwoven). SEM, H₂O contact angle measurements, heat sealability, and water vapor barrier measurements were carried out to characterize the composition and surface structure of the samples. The potential of the method and the equipment was shown by the coatings, ranging to micrometer scale. With selected samples, hydrophobic coating was shown to form at speeds up to 100 m/min.     

Optimization of 1,2,5‐Thiadiazole Carbamates as Potent and Selective ABHD6 Inhibitors

At present, inhibitors of α/β‐hydrolase domain 6 (ABHD6) are viewed as a promising approach to treat inflammation and metabolic disorders. This article describes the development of 1,2,5‐thiadiazole carbamates as ABHD6 inhibitors. Altogether, 34 compounds were synthesized, and their inhibitory activity was tested using lysates of HEK293 cells transiently expressing human ABHD6 (hABHD6). Among the compound series, 4‐morpholino‐1,2,5‐thiadiazol‐3‐yl cyclooctyl(methyl)carbamate (JZP‐430) potently and irreversibly inhibited hABHD6 (IC₅₀=44 nM ) and showed ～230‐fold selectivity over fatty acid amide hydrolase (FAAH) and lysosomal acid lipase (LAL), the main off‐targets of related compounds. Additionally, activity‐based protein profiling indicated that JZP‐430 displays good selectivity among the serine hydrolases of the mouse brain membrane proteome. JZP‐430 has been identified as a highly selective, irreversible inhibitor of hABHD6, which may provide a novel approach in the treatment of obesity and type II diabetes.     

Acoustic emission of rolling bearings lubricated with contaminated grease

In elastohydrodynamic lubrication (EHL), an extreme smoothness of the contacting surfaces is essential for the formation of a thin lubricant film, which separates the moving surfaces from each other. Sharp asperities, in particular, are very detrimental for the sliding surfaces. Because of the limited thickness of the lubricating film, the contact zone is very vulnerable if the lubricant contains contaminants, especially if hard particles are present in the lubricant.The present paper focuses on the acoustic emission (AE) measurement method for the monitoring of the lubrication situation in a grease lubricated rolling bearing. The aim of the investigation was to clarify how the contaminants in the grease influence the acoustic emission of the rolling bearing. In the paper, the results of tests with clean greases and with deliberately contaminated greases, and the influence of the cleaning and re-greasing of the bearing are discussed. The results showed that the AE measurement indicated very clearly the lowest contaminant concentration included in the study that was as low as 0.02 weight-%. Small size contaminant particles generated a higher AE pulse count level than large size particles. The AE time signal analysis method proved to be a suitable method to indicate the hardness of the contaminant particles. Cleaning the bearing of contaminants and re-greasing with a clean grease reduced the AE level of the bearing.     

Screening of chemical pulp,revisiting technology options,and the state-of-the-art equipment—A critical review

Screening of pulp can be expressed as a process where solid contaminants are removed from a pulp slurry without an excessive loss of fibres of acceptable quality. The impurities originate from the feedstock, or they are generated during the transport, handling, storage, or pulping process. The most typical impurities include bark, fibre bundles or shives, knots, plastic, rubber, and sand. Moreover, there are also other objectives for screening, such as the improvement of the pulp quality, savings in bleaching chemical consumption, and protection of process equipment. In industrial applications, pulp screening is typically carried out with more than one screen for a more beneficial screening result. The pulp screening equipment can be divided into different types by the separation technique employed, such as atmospheric or pressurized screens, centrifugal screens, vibrating screens, etc. In addition, there are other types of related equipment that are common in the pulp screening process, such as knotters, refiners, and hydrocyclones. The main objective of this review is to discuss the advantages and disadvantages of modern screening equipment as well as introduce contemporary screening strategies for chemical pulp mills.     

Nanotechnology Facilitated Cultured Neuronal Network and Its Applications

The development of a biomimetic neuronal network from neural cells is a big challenge for researchers. Recent advances in nanotechnology, on the other hand, have enabled unprecedented tools and techniques for guiding and directing neural stem cell proliferation and differentiation in vitro to construct an in vivo-like neuronal network. Nanotechnology allows control over neural stem cells by means of scaffolds that guide neurons to reform synaptic networks in suitable directions in 3D architecture, surface modification/nanopatterning to decide cell fate and stimulate/record signals from neurons to find out the relationships between neuronal circuit connectivity and their pathophysiological functions. Overall, nanotechnology-mediated methods facilitate precise physiochemical controls essential to develop tools appropriate for applications in neuroscience. This review emphasizes the newest applications of nanotechnology for examining central nervous system (CNS) roles and, therefore, provides an insight into how these technologies can be tested in vitro before being used in preclinical and clinical research and their potential role in regenerative medicine and tissue engineering.     

Lipid profile,lipid ratios,apolipoproteins, and risk of cardiometabolic multimorbidity in men: The Kuopio Ischaemic Heart Disease Risk Factor Study

The blood level of lipids, apolipoproteins, and lipid ratios are important predictors of some chronic diseases. However, their association with cardiometabolic multimorbidity (CMM) is less known. We evaluated a wide range of lipid profiles and lipid ratios, including low-density lipoprotein-cholesterol (LDL-C), very-low-density lipoprotein-cholesterol (VLDL-C), high-density lipoprotein-cholesterol (HDL-C), and apoA1 and B, as well triglyceride and total cholesterol with risk of incident CMM. In 1728 men aged 52.5 ± 5.2 years from the Kuopio Ischaemic Heart Disease were included in this study. We defined CMM as coexisting of two or more of stroke, type 2 diabetes mellitus (T2D), coronary heart disease (CHD). A Cox proportional hazard regression method was applied to evaluate the risk of CMM against the exposures. During the mean follow-up of 22.4 years, 335 men suffered from CMM conditions. Higher serum triglyceride and VLDL concentrations were associated with a higher risk of coexisting T2D-CHD (HRs 1.99 (95% CI, 1.12–3.53) and HRs 1.79 (95% CI, 1.04–3.11), respectively. Whereas higher HDL was associated with lower incident [HRs 0.49 (95% CI, 0.40–1.00)]. The HRs for coexisting T2D-CHD was 2.02 (95% CI, 1.01–3.07) for total cholesterol/HDL-C, 1.85 (95% CI, 1.04–3.29) for triglyceride/HDL-C, 1.69 (95% CI, 1.01–2.31) for Non-HDL-C/HDL-C, and 1.89 (95% CI, 1.03–2.46) for apoB/apoA1. In contrast, serum LDL-C/apoB ratios were inversely associated with the risk of coexisting T2D-CHD [HRs 0.50 (95% CI, 0.28–0.90)]. No associations were observed between our exposures and other CMM conditions. In conclusion, elevated triglyceride, VLDL-C, total cholesterol/HDL-C, TG/HDL-C, apoB/apoA1 as well as lower LDL-C/apoB were independently associated with the higher risk of T2D-CHD coexistence.