2号高炉进风面积的调节

叙述了武钢2号高炉针对原燃料条件变化进行进风面积的调整及调整效果，并对其原因进行了分析。     

添加ZrO2对铜基摩擦材料摩擦磨损性能的影响

采用粉末冶金方法制备了高速列车用铜基摩擦材料,研究了添加ZrO2的量对材料的摩擦因数、磨损量的影响规律。结果表明:在添加ZrO2的材料中,含5%(质量分数,下同)ZrO2的材料摩擦因数较高,磨损量也较大;添加8%ZrO2的材料在高速下的摩擦因数较高,磨损率较小且变化平稳。材料的磨损在较低的速度下以粘着磨损为主;随着速度的上升,磨损也逐渐变成以剥层脱落和氧化磨损的混合机制为主。     

用质子激发X射线分析方法进行人发微量元素的分析研究

一、序言 质子激发X射线分析方法是瑞典人约翰逊在1970年首先提出来的。由于它具有灵敏度高、取样少、无损伤、快速、适用范围广等特点,使它在十余年中在生物医学、环境科学、地质、冶金、考古学和法学等领域得到了广泛的应用。我们应用质子激发X射线分析方法分析了人发中的微量元素。     

中国铜工业1998年应采取的对策

本文拟就分析1998年铜市熊态依旧的形势,探讨中国铜企业应如何面对现实,迎接挑战.采取对策.     

CAD软件对硬件的要求

本文针对为能更好的运行ＣＡＤ软件,对所需要的配件系统进行分析比较,以达到合理配置硬件系统,提高工作效率的目的。     

关于细胞神经网络无性模板的设计

本文以连通片检测器无性模板的设计为例，给出了细胞神经网络中无性模板的设计方法及连通片检测器无性模板中各元素的数值范围。     

Effect of particle size distribution on green properties during high velocity compaction

Iron powders with two different particle size distributions were compacted by high velocity compaction. The influences of particle size distribution and impact velocity on green properties, including green density, springback, tensile strength and bending strength etc., were studied with scanning electron microscopy (SEM) and a computer controlled universal testing machine. The results show that the particle size distribution and the impact velocity strongly affect its properties. Wider size distribution results in green compact with higher density and better strength. Furthermore, springback of compacts is lower produced by the powder with wider size distribution, especially for radial springback. As impact velocity increases, its green density and green strength gradually increases, but the increasing rate of density decreases gradually. No special relation is found between springback and impact velocity. In addition, the axial springback and the bending strength are higher than the radial springback and the tensile strength, respectively.     

A formal architectural model for logical agent mobility

The process of agent migration is the major difference between logical code mobility of software agents and physical mobility of mobile nodes in ad hoc networks. Without considering agent transfer, it would make little sense to mention the modeling of strong code mobility, which aims to make a migrated agent restarted exactly from the state when it was stopped before migration. From the perspective of system's architecture, this paper proposes a two-layer approach for the formal modeling of logical agent mobility (LAM) using predicate/transition (PrT) nets. We view a mobile agent system as a set of agent spaces and agents could migrate from one space to another. Each agent space is explicitly abstracted to be a component, consisting of an environmental part and an internal connector dynamically binding agents with their environment. We use a system net, agent nets, and a connector net to model the environment, agents, and the connector, respectively. In particular, agent nets are packed up as parts of tokens in system nets, so that agent transfer and location change are naturally captured by transition firing (token game) in Petri nets. Agent nets themselves are active only at specific places and disabled at all the other places in a system net. The semantics of such a two-layer LAM model is defined by transforming it into a PrT net. This facilitates the analysis of several properties about location, state, and connection. In addition, this paper also presents a case study of modeling and analyzing an information retrieval system with mobile agents.     

低临界胶束浓度PEGMA-b-PCL的制备及其 药物缓释性能

以ε-己内酯（ε-CL）为疏水链段,聚乙二醇甲醚甲基丙烯酸酯（PEGMA）为亲水链段,4-氰基-4-[(十二烷基硫基硫羰基)硫基]戊酸（CDPA）为可逆加成-断裂链转移（RAFT）试剂,在以甲苯为溶剂、N2氛围、80 ℃、反应24 h的条件下,通过RAFT聚合法制备了两嵌段聚合物PEGMA-b-PCL。将其自组装为胶束用作纳米药物载体,并以姜黄素（Cur）为胶束负载药物。考察了两嵌段聚合物结构、分子量及分布,表征了胶束载体粒径、形貌,测试了胶束载体的载药和释药性能。结果表明,不同嵌段聚合物相对分子质量范围为478~7318,此类聚合物具有较低的临界胶束浓度（CMC）,在常规条件下（pH=7.4）其范围为0.920~1.600 μg/mL。胶束载体粒径范围为:68.34~186.30 nm。当n(CDPA)∶n(ε-CL)=1∶200时,胶束载药量和包封率最高,可达12.05%和75.26%。在不同pH值环境下,药物缓释性能可达15 d,其中pH=5.0时释药量可达35.38%。