One-pot synthesis and modification of silica nanoparticles with 3-chloropropyl-trimethoxysilane assisted by microwave irradiation

Industry and academia have shown great interest in the synthesis of organic–inorganic hybrid material because the modification of inorganic supports with organic groups increases the options for using these materials. Microwave irradiation as a heat source is an alternative tool compared with conventional heating (oil bath or furnace) to reduce the reaction times during the synthesis of these materials. Thus, the purpose of this work was to synthesize an organic–inorganic hybrid material, more specifically silica nanoparticles modified with 3-chloropropyl-trimethoxysilane, using microwave irradiation as the heat source. The hybrid materials were synthesized using the sol–gel method, with microwave irradiation for 10, 25, and 40?min, at 300?W of power and temperature of 40, 60, and 80°C. Elemental analyses, FTIR, and N₂ adsorption–desorption isotherms were developed to characterize the materials. It can be concluded that when microwave irradiation is used as a heat source, the reaction rate is accelerated and the surface area of hybrid materials increases considerably.     

Enrichment,in vitro,and quantification study of antidiabetic compounds from neglected weed Mimosa pudica using supercritical CO2 and CO2-Soxhlet

Supercritical fluid extraction (SFE) using carbon dioxide (CO₂) and liquid CO₂ using Soxhlet (CO₂-Soxhlet) extraction were employed to extract three (3) antidiabetic compounds viz. stigmasterol, quercetin, and avicularin from Mimosa pudica. Various extraction parameters were studied. Extracts were analyzed pharmacologically, qualitatively and quantitatively to ascertain enrichment levels. All three antidiabetic compounds were effectively enriched under optimized conditions of temperature 60°C, pressure 40 MPa, co-solvent ratio 30%, and CO₂ flow rate of 5 ml min^?1. SFE was found to be the better method for enrichment of the antidiabetic compounds than the CO₂-Soxhlet method. Extraction conditions were seen to affect the enrichment of desired compounds.     

Sepiolite hybridized commercial fillers,and their effects on curing process,mechanical properties,thermal stability,and flammability of ethylene propylene diene monomer rubber composites

Ethylene propylene diene monomer rubber (EPDM)-based composites containing sepiolite (sep) hybridized with calcium carbonate (CaCO₃), silica (Sil) or carbon black (CB) were prepared on a two-roll mill. The influence of fillers’ contents on the curing, mechanical, thermal and flammability of the composites was investigated. In comparison with EPDM/sep at 30 parts per hundred rubbers (phr) as a control composite, EPDM/sep/CB composites exhibited an outstanding improvement in tensile strength followed by EPDM/sep/Sil and EPDM/sep/CaCO₃ composites. EPDM/sep/CB displayed the highest thermal stability and also improved flammability resistance. In addition, a higher amount of carbon black gave higher tensile strength. The results were influenced by the ability of CB to disperse well and form protective layers acting as mass transport barriers in the matrix. The field emission scanning electron microscopy analyses proved better dispersion of CB in the matrix. The presence of protective layers on the surface of samples consequently improved the thermal properties of the EPDM composites. The mechanism of formation of char protective layer in hybrid EPDM composites was also investigated based on morphological observations of char residues. According to this work, Sil and CB were able to hybrid with sep, while sep could be a potential substitution of CaCO₃ in the EPDM composites.     

Comparative B‐mode and Doppler renal ultrasonography with histopathological findings in dogs positive for canine visceral leishmaniasis

Morphological parameters and renal flow were assessed and measured in six clinically healthy dogs with negative serological and parasitological examinations for canine visceral leishmaniasis (CVL) and six dogs with CVL‐positive serological and parasitological tests and asymptomatic condition of the disease. Kidney length and diameter were measured and compared with the aorta/kidney ratio. Alterations in flow were measured using the flow velocity (cm/s) and resistance index (RI). Renal function was assessed by serum biochemical examination (urea, creatine, total proteins, albumin, and globulin) and urinalysis. CVL‐positive animals presented heterogeneous kidney echotexture, reduced vascular flow, hypoperfusion, lesser visualization of the arcuate arteries, high RI values (1.06 ± 0.28 for the right kidney and 1.10 ± 0.30 for the left kidney), reduced diastolic flow, and high systolic peak. They also presented positive creatine/RI correlation and between the renal artery vascular flow and kidney diameter. Histopathological analysis of CVL‐positive animals was compatible and confirmed hemodynamic changes observed by Doppler ultrasound. The findings in the present study showed that Doppler ultrasonography is a valid method to assess and detect alterations in flow in renal pathological processes with kidney vascular damage, as in the case of leishmaniasis, and can help in the diagnosis of animals with this infection. Microsc. Res. Tech. 79:637–645, 2016. © 2016 Wiley Periodicals, Inc.     

Analysis of adhesive interface in root canals irradiated by Er,Cr:YSGG laser after luting a fiber post

This study evaluated the effect of Er,Cr:YSGG laser on the root canal dentin after luting a fiber post. Twenty‐four bovine teeth roots were prepared using NiTi instruments and filled with Sealer 26 and gutta‐percha. Post spaces were prepared and roots were distributed according to dentin treatment (n = 8): 2.5%NaOCl (group control), Er,Cr:YSGG laser (1.5 W, 20 Hz, 20 s) (group test 1) or 2.5%NaOCl + Er,Cr:YSGG laser (group test 2). Fiber posts were luted using adhesive cement (Rely X U200, 3M) and roots were prepared to confocal laser scanning microscopy (CLSM) and scanning electron microscope (SEM). The morphology of interface, thickness of cement, and the gaps and tags were analyzed. Non‐parametrical data for thickness of cement were submitted to Friedman and Kruskall–Wallis tests (α = 0.05) and parametrical data for gaps to ANOVA (α = 0.05). CLSM of the cement thickness and gaps revealed no significant difference in surface treatment (NaOCl, Er,Cr:YSGG laser and NaOCl + Er,Cr:YSGG laser) (p > .05) and canal thirds (cervical, middle, and apical) (p > 0.05). SEM showed tags and a residual layer of cement adhered to dentin, mainly in laser‐irradiated specimens. The pretreatment of root canal with Er,Cr:YSGG laser previously to luting the fiber post with a self‐adhesive cement did not influence the cement thickness and gaps but affected the dentin interaction.     

Comparative study of the wear behavior of composites for posterior restorations

This investigation sought to compare the abrasive wear rates of resin composites designed for posterior applications. Seventy-five specimens were fabricated with conventional hybrid (Charisma and Filtek Z250) or packable composites (Filtek P60, Solitaire II and Tetric Ceram HB), according to a randomized complete block design (n = 15). Specimens were finished and polished metallographically and subjected to abrasive wear which was performed under a normal load of 13N at a frequency of 2 Hz using a pneumatic device (MSM/Elquip) in the presence of a mucin-containing artificial saliva. Wear was quantified profilometrically in five different locations of each specimen after 1,000, 5,000, 10,000, 50,000 and after every each 50,000 through 250,000 cycles. A split-plot ANOVA showed a significant difference between the wear resistance of composites (α = 0.05). Tukey’s test ascertained that while the composites Filtek Z250 and Charisma wore significantly less than any other of the materials tested, Tetric Ceram HB experienced the greatest wear rates. Filtek P60 and Solitaire II showed intermediate rates of material removal. The wear pattern of composites proved to be biphasic with the primary phase having the faster wear rate. In conclusion, packable resin composites may not have superior wear compared to conventional hybrid composites.     

Comparison of the anthropometric and biochemical variables between children and their parents

The objective of this study was to compare the anthropometry, body composition and biochemical profile between eutrophic and obese children, as well as to relate the children's nutritional state and body composition to those of their respective parents. A control-case study was carried out with 50 eutrophic and 50 obese children paired according to gender, age, socioeconomic condition, and selected from the nutritional evaluation of 2 074 children aged 6 to 8 years, attending public and private urban schools in Vi?osa, Minas Gerais, Brazil. The measurements evaluated were weight, height, circumferences (waist and hip) and thickness skinfolds (triceps and subscapular). The serum levels of glucose, total-cholesterol, HDL, LDL, triglycerides and hemoglobin in the children were evaluated. The obese children presented a larger body size and higher percentage for total body fat as well as its accumulation in the central region, and higher serum levels for triglycerides (p < 0.05). For all biochemical parameters, except for hemoglobin and HDL, there occurred a positive correlation with the located fat in the central region as well as with the total body fat in children (p < 0.05). The obese mothers showing high percentage of body fat and its accumulation in the central region rather tend to have children with these characteristics (p < 0.05). The highest number of the close relatives who are obese and present dyslipidemia is highlighted in the obese children (p < 0.05). This study evidences the differences concerning to the distribution of the body fat and lipid profile among eutrophic and obese children, as well as the strong influence of the maternal obesity upon child's obesity.     

Dolphins (Tursiops truncatus) comprehend the referential character of the human pointing gesture.

The authors tested a dolphin's (Tursiops truncatus) understanding of human manual pointing gestures to 3 distal objects located to the left of, to the right of, or behind the dolphin. The human referred to an object through a direct point (Pd), a cross-body point (Px), or a familiar symbolic gesture (S). In Experiment 1, the dolphin responded correctly to 80% of Pds toward laterally placed objects but to only 40% of Pds to the object behind. Responding to objects behind improved to 88% in Experiment 2 after exaggerated pointing was briefly instituted. Spontaneous comprehension of Pxs also was demonstrated. In Experiment 3, the human produced a sequence of 2 Pds, 2 Pxs, 2 Ss, or all 2-way combinations of these 3 to direct the dolphin to take the object referenced second to the object referenced first. Accuracy ranged from 68% to 77% correct (chance?=?17%). These results established that the dolphin understood the referential character of the human manual pointing gesture. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A Secreted Chorismate Mutase from Xanthomonas arboricola pv. juglandis Attenuates Virulence and Walnut Blight Symptoms

Walnut blight is a significant above-ground disease of walnuts caused by Xanthomonas arboricola pv. juglandis (Xaj). The secreted form of chorismate mutase (CM), a key enzyme of the shikimate pathway regulating plant immunity, is highly conserved between plant-associated beta and gamma proteobacteria including phytopathogens belonging to the Xanthomonadaceae family. To define its role in walnut blight disease, a dysfunctional mutant of chorismate mutase was created in a copper resistant strain Xaj417 (XajCM). Infections of immature walnut Juglans regia (Jr) fruit with XajCM were hypervirulent compared with infections with the wildtype Xaj417 strain. The in vitro growth rate, size and cellular morphology were similar between the wild-type and XajCM mutant strains, however the quantification of bacterial cells by dPCR within walnut hull tissues showed a 27% increase in XajCM seven days post-infection. To define the mechanism of hypervirulence, proteome analysis was conducted to compare walnut hull tissues inoculated with the wild type to those inoculated with the XajCM mutant strain. Proteome analysis revealed 3296 Jr proteins (five decreased and ten increased with FDR ≤ 0.05) and 676 Xaj417 proteins (235 increased in XajCM with FDR ≤ 0.05). Interestingly, the most abundant protein in Xaj was a polygalacturonase, while in Jr it was a polygalacturonase inhibitor. These results suggest that this secreted chorismate mutase may be an important virulence suppressor gene that regulates Xaj417 virulence response, allowing for improved bacterial survival in the plant tissues.