Mechanical properties of a cryogenically mechanically alloyed polycarbonate–poly(aryl ether ether ketone) system

The processing–property relationship of a model cryogenically mechanically alloyed polymer–polymer system [polycarbonate (PC) and poly(aryl ether ether ketone) (PEEK)] was investigated. PC and PEEK powders were cryogenically mechanically alloyed for 10 h, and the resulting two‐phase powder particles were processed into testable coupons with a miniature ram‐injection molder. The bulk mechanical properties of the coupons made from the mechanically alloyed powders and nonmechanically alloyed powders were investigated as a function of mechanical alloying and injection‐molding parameters. The injection‐molded coupons were mechanically tested in the three‐point‐bending mode. The results demonstrated that no measurable improvement was achieved in the energy to break, strain at failure, or failure strength in the coupons made from the mechanically alloyed materials in comparison with those of the coupons made from the nonmechanically alloyed powders. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1196–1202, 2003     

Anti-biofilm Activity of Human Milk Oligosaccharides in Clinical Strains of Streptococcus agalactiae with Diverse Capsular and Sequence Types

Group B Streptococcus (GBS) is an encapsulated Gram-positive bacterial pathogen that causes severe perinatal infections. Human milk oligosaccharides (HMOs) are short-chain sugars that have recently been shown to possess antimicrobial and anti-biofilm activity against a variety of bacterial pathogens, including GBS. We have expanded these studies to demonstrate that HMOs can inhibit and dismantle biofilm in both invasive and colonizing strains of GBS. A cohort of 30 diverse strains of GBS were analyzed for susceptibility to HMO-dependent biofilm inhibition or destruction. HMOs were significantly effective at inhibiting biofilm in capsular-type- and sequence-type-specific fashion, with significant efficacy in CpsIb, CpsII, CpsIII, CpsV, and CpsVI strains as well as ST-1, ST-12, ST-19, and ST-23 strains. Interestingly, CpsIa as well as ST-7 and ST-17 were not susceptible to the anti-biofilm activity of HMOs, underscoring the strain-specific effects of these important antimicrobial molecules against the perinatal pathogen Streptococcus agalactiae.     

Effects of the amount of fillers and of the crosslink density on the mechanical behavior of carbon‐black filled styrene butadiene rubbers

Several carbon‐black filled styrene‐butadiene rubbers are subjected to monotonic uniaxial tension tests in order to investigate the effects of the amount of fillers and of the crosslink density on their mechanical properties. The Young modulus, the volume changes associated with material damage and the stretch to failure are extracted and discussed. Results compare well to the literature results when exist and quantitative analysis are proposed when possible. Results show that filled rubbers are not incompressible when submitted to uniaxial tension tests and their volume changes are strongly dependent of the amount of fillers but are unaffected by the crosslink density. The latter shows strong impact on the filled rubbers stretch to failure but more interestingly this impact is comparable to what is encountered in unfilled rubbers. The stretch to failure is improved by the addition of fillers with an optimum for material filled around 30 phr. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Novel Reaction Kinetic Model for Anionic Polyamide‐6

Semi‐adiabatic temperature measurements are recorded and used to define semi‐empirical equations for the simulation and prediction of the anionic polyamide‐6 (APA‐6) reaction kinetics. The resin mixture used has a long infusion window before the reaction starts. The prediction of the induction time and its corresponding initial temperature of reaction is explored. By means of this semi‐empirical approach and an optimised fitting procedure, the reaction kinetics of APA‐6 can successfully be described. The adiabatic polymerisation can be predicted on the basis of an autocatalytic Kamal‐Sourour model for thermoset resins, and the crystallisation can be described using the isothermal crystallisation model.

     

Development of antimicrobial stainless steel via surface modification with N‐halamines: Characterization of surface chemistry and N‐halamine chlorination

N‐halamine modification of materials enables the development of antimicrobial materials whose activity can be regenerated after exposure to halogenated sanitizers. Surface and bulk modification of polymers by N‐halamines has shown great success, however, modification of inorganic substrates (e.g., stainless steel) remains an area of research need. Herein, we report the covalent surface modification of stainless steel to possess rechargeably antimicrobial N‐halamine moieties. Multilayers of branched polyethyleneimine and poly(acrylic acid) were immobilized onto the surface of stainless steel and the number of N‐halamines available to complex chlorine was quantified. Samples were characterized through contact angle, Fourier transform infrared spectroscopy, ellipsometry, dye assay for amine quantification, and X‐ray photoelectron spectroscopy. Increasing the number of multilayers from one to six increased the number of N‐halamines available to complex chlorine from 0.30 ± 0.5 to 36.81 ± 5.0 nmol cm^?2. XPS and FTIR confirmed successful covalent layer‐by‐layer deposition of the N‐halamine multilayers. The reported layer‐by‐layer deposition technique resulted in a greater than seven‐fold increase of available N‐halamine compared to prior reports of N‐halamine surface modifications. The N‐halamine modified steel demonstrated antimicrobial activity (99.7% reduction) against the pathogen Listeria monocytogenes. Such surface modified stainless steel with increased N‐halamine functionality, and therefore potential for rechargeable antimicrobial activity, supports efforts to reduce cross‐contamination by pathogenic organisms in the food and biomedical industries. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The Characterisation of Pluripotent and Multipotent Stem Cells Using Fourier Transform Infrared Microspectroscopy

Fourier transform infrared (FTIR) microspectroscopy shows potential as a benign, objective and rapid tool to screen pluripotent and multipotent stem cells for clinical use. It offers a new experimental approach that provides a holistic measurement of macromolecular composition such that a signature representing the internal cellular phenotype is obtained. The use of this technique therefore contributes information that is complementary to that acquired by conventional genetic and immunohistochemical methods.     

Thermal analysis of novel underfill materials with optimum processing characteristics

This work encompasses the development of low‐viscosity cyclic oligomer underfill formulations that cure without heat evolution. Boron nitride, silica‐coated aluminum nitride, and alumina ceramic powders were used as fillers in cyclic butylene terephthalate oligomer melts. The melts were heated with a suitable catalyst to induce polymerization. The effects of the filler type and composition on the thermal and mechanical properties of the poly(butylene terephthalate)/filler composites were examined with differential scanning calorimetry, temperature‐modulated differential scanning calorimetry, thermogravimetric analysis, thermomechanical analysis, and dynamic mechanical analysis. Scanning electron microscopy was employed to elucidate the morphology of these composites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1300–1307, 2005     

Restoration of depressed prostanoid-induced ileal contraction in spontaneously hypertensive rats by dietary fish oil

We have reported that dietary fish oil (FO) rich in n-3 PUFA modulates gut contractility. It was further demonstrated that the gut of spontaneously hypertensive rats (SHR) has a depressed contractility response to prostaglandins (PG) compared with normotensive Wistar-Kyoto (WKY) rats. We investigated whether feeding diets supplemented with n-3 PUFA increased gut contractility and restored the depressed prostanoid response in SHR gut. Thirteen-week-old SHR were fed diets containing fat at 5 g/100 g as coconut oil (CO), lard, canola oil containing 10% (w/w) n-3 FA as alpha-linolenic acid (1 8:3n-3), or FO (as HiDHA, 22:6n-3) for 12 wk. A control WKY group was fed 5 g/100 g CO in the diet. As confirmed, the SHR CO group had a significantly lower gut response to PGE2 and PGF2alpha compared with the WKY CO group. Feeding FO increased the maximal contraction response to acetylcholine in the ileum compared with all diets and in the colon compared with lard, and restored the depressed response to PGE2 and PGF2alpha in the ileum but not the colon of SHR. FO feeding also led to a significant increase in gut total phospholipid n-3 PUFA as DHA (22:6n-3) with lower n-6 PUFA as arachidonic acid (20:4n-6). Canola feeding led to a small increase in ileal EPA (20:5n-3) and DHA and in colonic DHA without affecting contractility. However, there was no change in ileal membrane muscarinic binding properties due to FO feeding. This report confirms that dietary FO increases muscarinic- and eicosanoid receptor-induced contractility in ileum and that the depressed prostanoid response in SHR ileum, but not colon, is restored by tissue incorporation of DHA as the active nutrient.     

Novel nucleophilic/basic and acidic organocatalysts for reaction between poorly reactive diisocyanate and diols

Original basic or acidic organic compounds derived from guanidine or phenyl phosphonic acid were specifically designed and tested as new catalysts for the bulk synthesis of polyurethane prepolymers from a precursor system with particularly low reactivity (secondary alcohol + aliphatic isocyanate at low temperature). Both families showed interesting catalytic activities at 60–80 °C, but must nevertheless be used in much higher amounts (1 mol%, i.e. between 0.15 and 0.50 wt%) than traditional metal-based catalysts. The efficiency of guanidine derivatives seems to be related to their nucleophilicity, whereas that of phosphonic acid derivatives depends on their acidity. However, the solubility of the considered species in the reactive medium also plays a major role. The water/alcohol selectivity of the catalysts, especially at room temperature, was then examined as an additional criterion. Guanidines are not selective and favor the reaction of isocyanate groups with water as much as that with alcohols. Phenyl phosphonic acid derivatives are more selective, and particularly pentafluorophenyl phosphonic acid displays a remarkable catalytic activity together with an acceptable selectivity and could represent an interesting and safer alternative to toxic tin and mercury derivatives for many industrial polyurethanes.     

Molecular Networking for Drug Toxicities Studies: The Case of Hydroxychloroquine in COVID-19 Patients

Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ.