多工况多级离心压缩机总体优化命题的建模与数值方法

介绍了多工况 点的压缩机最优模拟设计点的特点及相应的优化建模，包括目标函数的建立、约束条件的确立和计算方法，使满足该模拟设计点要求的压缩机在逼近优目标函数最大值的同时，兼顾各真实工况运行点都在较好效率下工作，并列出了基于模型级数据库的优化设计实例。     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。     

核电厂管系振动鉴定

本文介绍了核电厂管道振动鉴定概况,讨论了目前使用的管系振动的鉴定方法,给出了鉴定准则。     

F150交换机告警关联规则的研究

为了提高电信网络运营效率，降低维护成本，电信运营企业在网络告警管理系统中需要引入数据挖掘技术。本文主要研究利用数据挖掘技术来进行故障的管理，即对告警进行关联性分析，详细分析了告警序列数据的关联规则挖掘算法，并在南昌本地网F150交换机的告警数据库中予以实现，同时对实际挖掘结果进行分析和整理，推导出一些实用的关联规则。     

On-line learning delivery decision support system for highlyproduct mixed semiconductor foundry

A production learning system (PLS) based on the tool model was constructed as a decision support and real-time information update system to forecast the cycle time. A tool model includes a waiting model and a processing model. Each of the waiting and processing models uses a backpropagation neural network to establish the relationship between the input and output (time) of the model. Hence, cycle time estimation, tool group move and confirm line item performance (CLIP) value can be obtained based on the memory stored in the neural network. The result shows that the forecasting ability of the PLS has an error rate below 8% on average     

基于CPX8216硬件平台的GPRS板间切换的实现

GPRS全称通用分组无线业务,它在改进了现有GSM系统后能实现高速的数据传输。首先对GPRS系统做了简单介绍,然后在此基础上详细介绍了GPRS的板间切换在CPX8216硬件平台上的实现方法。     

合成叔十二碳硫醇的填充柱气相色谱分析

讨论了以硫化氢和十二碳烯为原料 ,以固体酸为催化剂 ,采用滴流床反应器连续法合成叔十二碳硫醇工艺中叔十二碳硫醇合成液 (粗硫醇 )的快速分析方法。对采用毛细管柱气相色谱和填充柱气相色谱分析粗硫醇的方法进行了比较。结果表明 ,采用填充柱气相色谱法分析粗硫醇 ,方法简便、快速、可靠 ;完成一次分析只需 1min ,相对标准偏差小于 1%。