Negative Pore Air Pressure Generation in Backfill of Retaining Walls During Earthquakes and its Effect on Seismic Earth Pressure

In order to investigate the seismic behavior of conventional type and geosynthetic-reinforced soil retaining walls, 1-g model shaking tests were conducted. Model walls having a height of about 50 cm were placed on a subsoil layer and backfilled with a layer of dense dry Toyoura sand. They were subjected to several steps of horizontal irregular excitations. As a result, generation of negative pore air pressure in the backfill was observed. The maximum amplitude of the negative pore air pressure during each shaking step increased with the base acceleration. Based on analyses of the measured data, it was inferred that such negative pore air pressure was caused by outward wall displacement relative to the backfill and not by dilative behavior of the backfill. It would cause a reduction in the seismic earth pressures exerted from the backfill. This feature suggests an advantage of a rigid full-height facing for reinforced soil walls over the segmental types of facing. A simplified numerical procedure to evaluate earth pressure was applied while considering the effects of the negative pore air pressure, and it could qualitatively simulate the measured behavior in terms of the seismic earth pressure and the angle of failure plane in the backfill.     

砂土地基地震液化沉降的两种简易计算方法的对比分析

利用两种简易方法对日本某核电站的砂性土地基在地震液化后的大变形沉降进行了计算和对比分析。这两种简易的实用方法只需要利用标准贯入试验数据就可以操作。计算结果表明,该核电站的砂性土地基在L2级地震作用下会发生较大的地面沉降,并可能对地下管线造成损坏。由于两种方法的计算原理相同,因此计算所得到的地基分层沉降趋势基本一致,但是在数值上存在着较大的差异,这主要是由于两种方法建立的基础试验数据不同以及具体计算方法上存在着差异所造成的。     

Study on the determination of pesticide residues in crops by ion-trap GC/MS/MS

Ion-trap GC/MS/MS was evaluated for the multi-residue determination of pesticides in agricultural products. Matrices were extracted from samples (spinach, carrot, onion and brown rice) with acetone and submitted to gel permeation chromatography, followed by a clean-up step through a graphite carbon cartridge. Thirty-five pesticides were added to either matrix, and analyzed by GC/MS/MS. Detection limits of pesticides by GC/MS/MS was almost the same as those by GC/MS (SIM). Coefficients of variation of peak area in 5 measurements of each pesticide at 0.1 microgram/mL or 0.05 microgram/mL with or without matrices were mostly acceptable, though those of 20 pesticides out of 35 were higher than 10% at a concentration of 0.02 microgram/mL. It was indicated that matrix artifacts, which interfere with GC/MS-Scan analysis, could be eliminated in some cases by using GC/MS/MS.     

Use of multivariate analysis for the improvement in prediction accuracy of bacterial aerobic plate count by flow cytometry

Flow cytometry (FCM) and aerobic plate count (APC) by the culture method were performed on green tea samples spiked with Escherichia coli type strain NCTC9001 (ATCC11775) solutions of different concentrations. In FCM, fluorescence signals from multiple stained bacteria and other fluorophores are detected using detector channels, and recorded as events with a voltage at each channel. FCM data were analyzed in two ways: conventional and multivariate analysis. In the former, the number of events with voltages larger than the defined threshold values was regarded as the predicted APC. In the latter, voltage histograms of all channels were obtained and merged horizontally to serve as explanatory variables. Then a partial least squares regression (PLSR) model was built to predict APC from the histogram data. The coefficient of determination (R²) and the root mean square error (RMSE) between APC by the culture method and that predicted by conventional FCM were 0.916 and 1.08 cfu/ml². The APC values predicted by the PLSR model and those measured were in good agreement with R² of 0.982 and RMSE of 0.417 cfu/ml, which verified the potential of the proposed method for improving APC prediction accuracy by FCM.     

Electron Spin Coherence of Phosphorus Donors in Isotopically Purified <Superscript>29</Superscript>Si

We investigate spin coherence time of electrons bound to phosphorus donors in silicon single crystals, employing a pulsed electron paramagnetic resonance technique. The samples were isotopically controlled so that they may possess different concentrations (about 5% and 100%) of ²⁹Si, which is the only non-zero-spin (spin-1/2) stable isotope of Si. Both ²⁹Si-concentration dependence and orientation dependence of the electron spin coherence time demonstrate that the decoherence is caused by spectral diffusion due to mutual flip-flops of the environmental nuclear spins. The detail analysis of spin echo decay curves enables the unique assignment of the host sites responsible for electron spin echo envelope modulation.     

Unique Features of Mobile Commerce

While the market potentials and impacts of web-based e-commerce are still in the ascendant, the advances in wireless technologies and mobile networks have brought about a new business opportunity and research attention, what is termed mobile commerce. Commonly, mobile commerce is considered to be another new application of existing web-based e-commerce onto wireless networks, but as an independent business area, mobile commerce has its own advantages and challenges as opposed to traditional e-commerce applications. This paper focuses on exploring the unique features of mobile commerce as compared with traditional e-commerce. Also, there are still some limitations arisen in m-commerce in contrast to web-based e-commerce. Finally, current state of mobile commerce in Japan is presented in brief, with an introduction of several cases involving mobile commerce applications in today's marketplace.     

Evaluation of robust control by universal learning networks

The characteristics of control system design using a universal learning network (ULN) are such that both the controlled systems and their controller are represented in a unified framework, and that the learning stage of the ULN can be executed by using not only first-order derivatives (gradient) but also the higher order derivatives of the criterion function with respect to parameters. ULNs have the same generalization ability as neural networks. So the ULN controller is able to control the system in a favorable way under an environment which is little different from the environment of the control system at the learning stage. However, stability cannot be sufficiently realized. In this paper, we propose a robust control method using a ULN and second-order derivatives of that ULN. Robust control, as considered here, is defined as follows. Even though the initial values of the node outputs are very different from those at the learning stage, the control system is able to reduce its influence to other node outputs and can control the system as in the case of no variation. In order to realize such robust control, a new term concerning the variation is added to the usual criterion function, and the parameters are adjusted so as to minimize the above-mentioned criterion function using second-order derivatives of the criterion function with respect to the parameters. Finally, it is shown that the ULN controller constructed by the proposed method works effectively in a simulation study of a non-linear crane system. This work was presented, in part, at the International Symposium on Artificial Life and Robotics, Oita, Japan, February 18–20, 1996     

Vibrational Spectroscopic Study of Structural Evolution in the Coprecipitated Precursors to La2Sn2O7 and La2Ti2O7

Structural evolution in the X-ray amorphous precursors to La₂Sn₂O₇ and La₂Ti₂O₇ is examined using IR and Raman spectroscopy. These precursors are prepared by rapid coprecipitation from mixed aqueous solutions of the corresponding metal chlorides. Rapid coprecipitation from an SnCl²⁻₆ and La³⁺-containing aqueous solution yields microcrystalline particles of SnO₂· n H₂O and La(OH)₃, which instantaneously interconnect to form an ultimate, complex colloid particle. The Ti(OH)²⁺₂ and La³⁺ in the other solution system coprecipitate into a different, complex colloid (an unidentified phase), which is definitely not a mixed dispersion of single-component colloids. A comparative examination of the vibrational spectra of the coprecipitates heated to various temperatures indicates that the SnO₂ and anatase phases develop in the respective precursors before crystallization of the desired double oxides. Crystallization itself can be attributed to a solid-state reaction among the various microcrystallites of each single-metal oxide in a gel particle of the precursor.     

高温流化床的流化特性及结焦非流化行为

在 8 0 mm× 30 mm和 80 mm× 10 mm石英流化床中 ,以低温粘结的高密度聚乙烯和聚丙烯 ,高温粘结的玻璃珠为实验物料 ,研究了高温流化床的流化特性及高温下物料结焦产生的非流化行为。结果表明 ,在本文实验条件下 ,Geldart A、B类高温表面粘结物料 ,床层温度小于其最小粘结温度时 ,床层温度增大 ,颗粒的最小流化速度减小 ;Geldart D类高温表面粘结物料的最小流化速度随温度增加而增大。得出了不同温度下颗粒最小流化速度预测式。床层温度大于最小粘结温度时 ,流化床需在较高的表观气速下才能保持流化 ,床层温度愈高床层流化所需的表观气速越大。研究同时发现 ,颗粒物料的粒径减小 ,流化颗粒的最小粘结温度减小。     

Low temperature silicon epitaxy from trichlorosilane via mesoplasma chemical vapor deposition

Epitaxial silicon thick films have been deposited at around 400 °C by mesoplasma chemical vapor deposition with trichlorosilane (TCS) as source gas. The deposition rate of the Si films increases linearly with the TCS flow rate and reaches 30 nm/s at 15 sccm of TCS. These films have exhibited relatively high hall mobility (~ 200 cm²/V-s) independently of the deposition rate.