Aluminum Triflate as a Powerful Catalyst for Direct Amination of Alcohols,Including Electron‐Withdrawing Group‐Substituted Benzhydrols

Direct aminations of allylic alcohols, benzylic alcohols, and benzhydrols with electron‐withdrawing (F, Br, I, NO₂, or CN) substituents were efficiently catalyzed by aluminum triflate [Al(OTf)₃] to afford the corresponding biarylamines in high yield, and the dibromo‐substituted product was further transformed into letrozole.     

Thermal‐Insulation,Electrical, and Mechanical Properties of Highly‐Expanded PMMA/MWCNT Nanocomposite Foams Fabricated by Supercritical CO2 Foaming

Foaming behavior of poly(methyl methacrylate) (PMMA)/multi‐walled carbon nanotubes (MWCNTs) nanocomposites and thermally‐insulating, electrical, and mechanical properties of the nanocomposite foams are investigated. PMMA/MWCNT nanocomposites containing various amounts of MWCNTs are first prepared by combining solution and melt blending methods, and then foamed using CO₂. The foaming temperature and MWCNT content are varied for regulating the structure of PMMA/MWCNT nanocomposite foams. The electrical conductivity measurement results show that MWCNTs have little effect on the electrical conductivity of foams with large expansion ratio. Thermal conductivities of both solid and foamed PMMA/MWCNT nanocomposites are measured to evaluate their thermally insulating properties. The gas conduction, solid conduction, and thermal radiation of the foams are calculated for clarifying the effects of cellular structure and MWCNT content on thermal insulation properties. The result demonstrates that MWCNTs endowed foams with enhanced thermal insulation performance by blocking thermal radiation. Moreover, the compressive testing shows that MWCNTs improve the compressive strength and rigidity of foams. This research is essential for optimizing environmentally friendly thermal insulation nanocomposite foams with enhanced thermal‐insulation and compressive mechanical properties.     

Protective effect of phytic acid hydrolysis products on iron-induced lipid peroxidation of liposomal membranes

Beneficial effects of dietary phytic acid (myo-inositol hexaphosphate; IP₆) have often been explained by its strong iron ion-chelating ability, which possibly suppresses iron ion-induced oxidative damage in the gastrointestinal tract. Because phytic acid is hydrolyzed during digestion, this work aimed to know whether its hydrolysis products (IP_2′ IP_3′, IP_4′ and IP₅) could still prevent iron ion-induced lipid peroxidation. Studies using liposomal membranes demonstrated that hydrolysis products containing three or more phosphate groups are able to inhibit iron ion-induced lipid peroxidation although their effectiveness decreased with dephosphorylation. Similarly, they also prevented iron ion-induced decomposition of phosphatidylcholine hydroperoxide. These results demonstrate that intermediate products of phytic acid hydrolysis still possess iron ion-chelating ability, and thus they can probably prevent iron ion-induced lipid peroxidation in biological systems.     

溶胶-凝胶法制备MgxZn1-xO纳米材料

以硝酸锌(Zn(NO3)2·6H2O)、柠檬酸(C6H8O7·H2O)为主要原料,采用改进的溶胶一凝胶法合成了纳米ZnO.在此基础上,添加硝酸镁(Mg(NO3)2·6H2O)合成了MgxZn1-xO.利用X-射线衍射(XRD)、扫描电子显微镜(SEM)表征分析了煅烧温度和Mg掺杂量对产物的相组成及显微形貌的影响.结果表明,x≤10at%时,MgxZn1-xO属于六方纤锌矿结构,当x≥20at%时,MgxZn1-xO中除了具有属于六方纤锌矿结构的ZnO以外还有属于NaCl结构的MgO晶相存在.随煅烧温度的升高,MgxZn1-xO纳米颗粒逐渐长大.     

Synthesis of proton conductive membranes based on inorganic–organic hybrid structure bound with phosphonic acid

Proton conductive inorganic–organic hybrid membranes were synthesized from styrene derivatives of alkoxysilane and ethyl 2-[3-(dihydroxyphosphonyl)-2-oxopropyl] acrylate (EPA) through copolymerization followed by sol–gel reaction. Self-standing, homogeneous and transparent hybrid membranes with chemically bound phosphonic acid groups were synthesized. FT-IR analysis exhibited the hybrid membranes included phosphonic acid groups. ¹³C and ²⁹Si NMR studies indicated that alkoxysilyl functionalized styrene derivatives were not only copolymerized with EPA but also condensed yielding Si–O–Si linkages by sol–gel reaction. TG–DTA analysis revealed that these membranes were thermally stable up to 200 °C in dry O₂. The proton conductivities of the hybrid membranes increased with phosphonic acid content and temperature. The P/Si ratio of the membrane was dependent on the number of alkoxy group in the starting alkoxysilane. The hybrid membrane from (dimethylmethoxysilylmethyl)styrene (DMMSMS(M))/EPA = 1/6 revealed proton conductivities of 6.3 × 10⁻³ and 2.4 × 10⁻⁴ S cm⁻¹ at 68.0% relative humidity and 18.8% relative humidity, respectively, at 140 °C.     

Present or Past Herbivory: A Screening of Volatiles Released from <Emphasis Type="Italic">Brassica rapa</Emphasis> Under Caterpillar Attacks as Attractants for the Solitary Parasitoid, <Emphasis Type="Italic">Cotesia vestalis</Emphasis>

Females of the solitary endoparasitoid Cotesia vestalis respond to a blend of volatile organic compounds (VOCs) released from plants infested with larvae of their host, the diamondback moth (Plutella xylostella), which is an important pest insect of cruciferous plants. We investigated the flight response of female parasitoids to the cruciferous plant Brassica rapa, using two-choice tests under laboratory conditions. The parasitoids were more attracted to plants that had been infested for at least 6 hr by the host larvae compared to intact plants, but they did not distinguish between plants infested for only 3 hr and intact plants. Although parasitoids preferred plants 1 and 2 days after herbivory (formerly infested plants) over intact plants they also preferred plants that had been infested for 24 hr over formerly infested plants. This suggests that parasitoids can distinguish between the VOC profiles of currently and formerly infested plants. We screened for differences in VOC emissions among the treatments and found that levels of benzyl cyanide and dimethyl trisulfide significantly decreased after removal of the host larvae, whereas terpenoids and their related compounds continued to be released at high levels. Benzyl cyanide and dimethyl trisulfide attracted parasitoids in a dose-dependent manner, whereas the other compounds were not attractive. These results suggest that nitrile and sulfide compounds temporarily released from plants under attack by host larvae are potentially more effective attractants for this parasitoid than other VOCs that are continuously released by host-damaged plants.     

Attraction to Herbivore-induced Plant Volatiles by the Host-foraging Parasitoid Fly <Emphasis Type="Italic">Exorista japonica</Emphasis>

Responses of the tachinid fly Exorista japonica Townsend to odors from corn plants infested with the fly’s host, the larvae of the noctuid moth Mythimna separata (Walker), were examined in a wind tunnel. Naïve female flies showed a higher rate of landing on M. separata-infested corn plants from which the host larvae had been removed than on artificially damaged or intact corn plants. When paper impregnated with a solution of headspace volatiles collected from host-infested plants was attached to intact plants, females landed on the plants at a high rate. Females also responded to intact plants to which had been attached with paper impregnated with a synthetic blend of nine chemicals identified previously in host-infested plants. There was an optimum concentration of the synthetic blend for the females’ landing. Of the nine chemicals identified previously, four [(E)-4,8-dimethyl-1,3,7-nonatriene, indole, 3-hydroxy-2-butanone, and 2-methyl-1-propanol] released only by host-infested plants were classified as a host-induced blend. The other five [(Z)-3-hexen-1-yl acetate, (E)-2-hexenal, hexanal, (Z)-3-hexen-1-ol, and linalool] were classified as a non-specific blend released not only by infested plants but also by artificially damaged or intact plants. In the wind tunnel, E. japonica females did not respond to intact plants to which paper containing a solution of non-specific blend or host-induced blend was attached. However, they showed a high level of response to a mixture of the non-specific and host-induced blends. These results indicate that naïve E. japonica use a combination of non-specific and host-induced blends as an olfactory cue for locating host-infested plants.     

Preparation and Characterization of Highly Fluorescent, Glutathione-coated Near Infrared Quantum Dots for in Vivo Fluorescence Imaging

Fluorescent probes that emit in the near-infrared (NIR, 700–1,300 nm) region are suitable as optical contrast agents for in vivo fluorescence imaging because of low scattering and absorption of the NIR light in tissues. Recently, NIR quantum dots (QDs) have become a new class of fluorescent materials that can be used for in vivo imaging. Compared with traditional organic fluorescent dyes, QDs have several unique advantages such as size- and composition-tunable emission, high brightness, narrow emission bands, large Stokes shifts, and high resistance to photobleaching. In this paper, we report a facile method for the preparation of highly fluorescent, water-soluble glutathione (GSH)-coated NIR QDs for in vivo imaging. GSH-coated NIR QDs (GSH-QDs) were prepared by surface modification of hydrophobic CdSeTe/CdS (core/shell) QDs. The hydrophobic surface of the CdSeTe/CdS QDs was exchanged with GSH in tetrahydrofuran-water. The resulting GSH-QDs were monodisperse particles and stable in PBS (phosphate buffered saline, pH = 7.4). The GSH-QDs (800 nm emission) were highly fluorescent in aqueous solutions (quantum yield = 22% in PBS buffer), and their hydrodynamic diameter was less than 10 nm, which is comparable to the size of proteins. The cellular uptake and viability for the GSH-QDs were examined using HeLa and HEK 293 cells. When the cells were incubated with aqueous solutions of the GSH-QDs (10 nM), the QDs were taken into the cells and distributed in the perinuclear region of both cells. After 12 hrs incubation of 4 nM of GSH-QDs, the viabilities of HeLa and HEK 293 cells were ca. 80 and 50%, respectively. As a biomedical utility of the GSH-QDs, in vivo NIR-fluorescence imaging of a lymph node in a mouse is presented.     

Thermal conduction theoretical analysis of temperature distribution during multiple-electrode submerged arc welding

In recent years, in order to reduce the costs of transportation and construction of pipelines, which are often constructed using multiple-electrode submerged arc welding (SAW), higher joint performance is required. Therefore, there has arisen the need to understand theoretically and control appropriately metallurgical and mechanical characteristics in heat-affected zone (HAZ), which has a significant influence on the strength and toughness of welded joints. Commonly, metallurgical phenomena in HAZ are evaluated based on the highest temperature and the cooling rate. Therefore, in order to control metallurgical and mechanical characteristics in HAZ by means of the welding conditions, evaluating the temperature distribution and the temperature history near the melted zone is essential. However, a detailed investigation of the temperature distribution for multiple-electrode SAW has not yet been carried out enough. In this study, in order to investigate the temperature distribution and histories during multiple-electrode SAW, the experimental results are compared with the theoretical results. In the theoretical analysis, the temperature rise equation in multiple heat sources welding is developed using the method of summation. Furthermore, on temperature distribution during welding, the effects of multiple heat sources, such as the number of heat sources and the distance between each electrodes, are considered quantitatively through the thermal conduction theoretical analysis. As the result, the distance between lead heat source and final heat source primally influences the area with the difference between a single heat source welding and multiple heat sources welding. Based on the results, it is expected to control temperature distribution near melted zone by more appropriate heat input characteristics, which is depended on heat source arrangement.     

Specialist Leaf Beetle Larvae Use Volatiles from Willow Leaves Infested by Conspecifics for Reaggregation in a Tree

Young, gregariously living larvae of the willow leaf beetles Plagiodera versicolora are known to exhibit characteristic aggregation-dispersion-reaggregation behavior and local fidelity to a host tree. In this study, we investigated whether plant volatiles induced by feeding P. versicolora larvae were involved in the reaggregation behavior. Under laboratory conditions, we conducted dual-choice bioassays and found that the first and second instars discriminated between volatiles from leaves infested by larvae and volatiles from uninfested leaves. The discriminative behavior was dependent on both the time leaves were infested and the age of discriminating larvae. First and second instars preferred odor from 1-d-infested leaves to odor from uninfested leaves, whereas third instars (solitary stage) did not discriminate between these volatile blends. Odor from 2-d-infested leaves was preferred to odor from 1-d-infested leaves by first instars, whereas odor from leaves infested for 3 d was not attractive to these very young larvae. Neither was odor of leaves infested for 1 d and then left uninfested for 1 or 2 d attractive to young larvae. The data suggest that the first and second instars use volatiles from a leaf newly infested by conspecific larvae as one of the reaggregation cues. We detected several herbivore-induced compounds in the headspace of the attractive leaves. Among those, a mixture of synthetic (E)-β-ocimene, (Z)-β-ocimene, allo-ocimene, and linalool was found to attract the larvae.