Factors affecting the oxidative activity of laccase towards biphenyl derivatives in homogeneous aqueous-organic systems

Catalytic oxidation of biphenyl derivatives was investigated using laccase in a homogeneous aqueous-organic system. A thermostable laccase from Trametes sp. showed the highest catalytic activity for the oxidation of 4-hydroxybiphenyl (4-HB) at a reaction temperature of 60 degrees C when dimethylsulfoxide (DMSO) was employed as a co-solvent. Furthermore, the catalytic performance was successfully enhanced by the incorporation of a laccase mediator system (LMS) into the aqueous-DMSO media. The catalytic performance strongly depended on the type of mediator, and the highest activity was observed with 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as mediator, suggesting the importance of the selection of a suitable mediator. It was verified that this mediator system is applicable to the oxidation of several biphenyl derivatives with hydroxyl groups.     

Development of Laser-Induced Capillary Wave Method for Viscosity Measurement Using Pulsed Carbon Dioxide Laser

A new experimental apparatus, based on the laser-induced capillary wave method involving the use of a pulsed carbon dioxide laser (wavelength 10.6 m, pulse width 50 ns, power 65 mJ) as a heating source has been developed. Since the present technique is applicable to a wide range of viscosity, this method is applicable to the process in which the viscosity drastically changes within a short period of time. In this method, interfering laser beams heat a liquid surface and generate a capillary wave (the wavelength can be adjusted from 20 to 200 m) caused by a spatially sinusoidal temperature distribution. The temporal behavior of the capillary wave is detected by a diffracted probe beam (He–Ne laser, 15 mW) at the heated area. The dynamics of the capillary wave provide information regarding thermophysical properties such as viscosity and surface tension. In the present study, several liquid samples spanning the viscosity range from 0.33 to 7080 MPa·s (e.g., acetone, toluene, 1-hexanol, ethylene glycol, JS1000, and JS14000) were investigated at room temperature. The detected signals for several liquid samples exhibiting a wide range of viscosity agree well with theoretical calculations, taking into account the influence of the distribution of surface tension.     

Using ESPI system to measure high temperature fatigue deformation of ceramics thermally sprayed SUS304 steel

The strains in an Al₂O₃/NiCr coating, which was thermally sprayed on SUS304 steel, were analyzed using an electronic speckle pattern interferometry (ESPI) system during fatigue testing (R = 0, _max = 173 MPa) at high temperature of 873 K. The strain changes with the crack initiation in the coatings and the delamination at the coating/substrate interface are accordingly discussed.Surface cracks originated from the top coating of Al₂O₃ and stopped at the bond coating of NiCr after 2 cycles test at 873 K. Many surface cracks and delamination along the NiCr/substrate interface were confirmed after 1 × 10⁵ cycles test. The strain values of un-sprayed specimens obtained from the ESPI system agreed with those measured by the strain gauge when tensile stresses were applied at room temperature. The deformation by thermal expansion and stress application at high temperatures can also be easily measured using this method. The strain on sprayed specimens was almost the same with that on un-sprayed specimens at 873 K, indicating the deformation in the coatings are always associated with that of the substrate surfaces at high temperature. By comparing and analyzing the strain distribution on the coating surface, the presence of cracks in the coatings and delamination at the coating/substrate interface can be in-situ and nondestructively detected.     

Profile structure of magnetic flux lines in type-II superconductor from a rectangular electron hologram

Profile magnetic configuration of a quantized flux line and flux-line lattice penetrating a type-II superconductor thin foil, niobium, was observed by electron holography and Lorentz microscopy using a 300 kV field-emission electron microscope. Each single flux line was distributed periodically as lattice structure in the mixed state just below its critical temperature of 8.5 K, while at low temperature of 5 K the flux lines were weakly bound as bundles. In order to observe the flux-line distribution over a wide area, discrete Fourier transform reconstruction in the holography was extended for a rectangular area without loss of information and data precision.     

CARD资源发现架构在无线传感网络中的性能研究

(西北工业大学计算机学院,陕西西安,710072)【摘要】CARD架构适用于大规模、高查询率、每次查询的数据传输量较小的Ad-hoc网络,它的核心目标是降低网络资源发现能耗,延长网络生命周期。文章首先介绍了CARD架构的结构;然后,建立了该架构的数学模型,该模型以无线传感器网络为目标场景,并推导出CARD架构的能耗和查询成功率与各个参数之间的函数关系;最后,根据该模型对CARD架构的能耗和查询成功率进行了理论分析,为CARD架构的参数选择提供了可靠的依据,并为对架构的进一步优化打下了坚实基础。     

Exoskeletal meal assistance system (EMAS II) for patients with progressive muscular disease

Patients with muscle weakness such as muscular dystrophy usually need someone’s assistance in their daily activities. In order to reduce the caregiver burden and to improve quality of life (QOL) of the patients, various robotic technologies have been developed. This paper presents an exoskeletal assistance system EMAS II for the patients, which assists the upper extremity for the purpose of daily activities such as eating, writing, or other desk works. The EMAS II assists four DOF; shoulder flexion-extension, shoulder abduction-adduction, shoulder medial-lateral rotation, and elbow flexion-extension. The EMAS II has three kinds of user interfaces which are operated by residual functions of the patients, because it is important for patients’ health and initiative to use the residual functions. In order to control the four DOFs exoskeleton system using the interfaces with less DOF, the EMAS II simulates upper limb motion patterns of healthy people. The patterns are modeled by extracting correlations between the height of the wrist joint and that of the elbow joint. Therefore, users have only to control the position of their wrist joint to do tasks at a table. Through an experiment with a healthy subject, the feasibility of meal assistance by the EMAS II was confirmed. Furthermore, the system was applied to a spinal muscular atrophy patient in a clinical trial to check the usability. The experimental results indicated that the EMAS II could support the patient’s upper extremity to do tasks at a table.     

Investigation of direct load management scheme with consideration of end‐user comfort

A direct load management scheme with two‐way communication, with consideration of end‐user comfort, is proposed. First, the control algorithm is developed and the data required to be transmitted between system operator and controllable loads are identified. Then, the actions of controllable air conditioners and the power adjustment of dispersed generators to eliminate overloads in a substation transformer are simulated. The results indicate that the proposed load management technique performs effectively to reduce overloads on the transformer while maintaining energy consumption in each load, and the performance is improved by coordination with the output of dispersed generators. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 176(3): 19–28, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21139     

Synthesis and hydrophilic property of polypropylene-graft-poly(polyethylene glycol-methacrylate) (PP-g-P(PEGMA))

Polypropylene-graft-poly(polyethylene glycol-methacrylate) (PP-g-P(PEGMA)), which is a hydrophobic-hydrophilic graft copolymer, was synthesized by a combination of an atom transfer radical polymerization (ATRP) of PEGMA with brominated polypropylene (PP-Br), which was synthesized from PP-OH prepared by metallocene-catalyzed copolymerization. Its structure was confirmed by ¹H NMR and GPC analyses. Transmission electron microscope (TEM) micrographs of PP-g-P(PEGMA) revealed the nanometer level microphase-separation morphology between the PP segment and the P(PEGMA) segment. The obtained PP-g-P(PEGMA) showed water-absorbing property as well as thermostability.     

Phospholipid polymer hydrogel formed by the photodimerization of cinnamoyl groups in the polymer side chain

We synthesized new polymers with both photocrosslinkability and biocompatibility by a random copolymerization of 4‐(4‐methoxycinnamoyl)phenyl methacrylate and 2‐methacryloyloxyethyl phosphorylcholine. These polymers were used as prepolymers to make a hydrogel by photoirradiation. Gelation began with 5 s of photoirradiation and reached an equilibrium state after 360 s of photoirradiation. The absorption maximum at 347 nm, attributed to the cinnamoyl group, disappeared with the photoirradiation time. That is, dimerization between cinnamoyl groups in the polymer proceeded and formed a hydrogel. The equilibrium water concentration of the hydrogels was more than 90%. Moreover, we succeeded in making a microshape hydrogel on glass by photoirradiation through a photomask. The window shape of the photomask was transferred to the hydrogel that was formed. We concluded that these photocrosslinkable polymers could be useful in preparing microfluidic devices for separating or immobilizing biomolecules and cells. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 44–50, 2007     

Limitations of the method using peroxidase activity of hemoglobin for detecting lipid hydroperoxides

The method using peroxidase activity of hemoglobin (Hb) for the determination of lipid peroxides was examined by using pure methyl linoleate hydroperoxides, trilinoleoylglycerol hydroperoxides and egg yolk phosphatidylcholine hydroperoxides as substrates and tetramethyl benzidine as electron donor for the peroxidase reaction of Hb. The reactivities of these substrates were quite varied. Furthermore, some electron donors were tested for peroxidase activity of Hb, but none showed a complete reduction of methyl linoleate hydroperoxides. From these results, it seems the Hb method needs to be carefully applied to biological materials that contain mixtures of different types of lipid classes.