Disconnection detection using earth capacitance measurement in photovoltaic module string

A disconnection detection method using an earth capacitance measurement in photovoltaic (PV) module string was experimentally studied. In the experiments with disconnections between PV modules in the string, the earth capacitance of the string was increased in proportion to the module number, and this feature resulted in that the disconnection position between the modules could be estimated by comparing the earth capacitance value of the failed string with that of the good string. Since the earth capacitance was not affected by the irradiance change, the detection method could be applied anytime to locate the disconnection position in the string without the effect of the irradiance change. Moreover, this method could be applied not only to the string consisting of the crystalline Si modules but also to the string consisting of the amorphous Si modules. Copyright © 2008 John Wiley & Sons, Ltd.     

Evaluating uncertainty in accident rate estimation at hydrogen refueling station using time correlation model

Hydrogen, as a future energy carrier, is receiving a significant amount of attention in Japan. From the viewpoint of safety, risk evaluation is required in order to increase the number of hydrogen refueling stations (HRSs) implemented in Japan. Collecting data about accidents in the past will provide a hint to understand the trend in the possibility of accidents occurrence by identifying its operation time However, in new technology; accident rate estimation can have a high degree of uncertainty due to absence of major accident direct data in the late operational period. The uncertainty in the estimation is proportional to the data unavailability, which increases over long operation period due to decrease in number of stations. In this paper, a suitable time correlation model is adopted in the estimation to reflect lack (due to the limited operation period of HRS) or abundance of accident data, which is not well supported by conventional approaches. The model adopted in this paper shows that the uncertainty in the estimation increases when the operation time is long owing to the decreasing data.     

Graphene's Latest Cousin: Plumbene Epitaxial Growth on a “Nano WaterCube”

While theoretical studies predicted the stability and exotic properties of plumbene, the last group‐14 cousin of graphene, its realization has remained a challenging quest. Here, it is shown with compelling evidence that plumbene is epitaxially grown by segregation on a Pd_1?xPb_x(111) alloy surface. In scanning tunneling microscopy (STM), it exhibits a unique surface morphology resembling the famous Weaire–Phelan bubble structure of the Olympic “WaterCube” in Beijing. The “soap bubbles” of this “Nano WaterCube” are adjustable with their average sizes (in‐between 15 and 80 nm) related to the Pb concentration (x < 0.2) dependence of the lattice parameter of the Pd_1?xPb_x(111) alloy surface. Angle‐resolved core‐level measurements demonstrate that a lead sheet overlays the Pd_1?xPb_x(111) alloy. Atomic‐scale STM images of this Pb sheet show a planar honeycomb structure with a unit cell ranging from 0.48 to 0.49 nm corresponding to that of the standalone 2D topological insulator plumbene.     

Preparation and anti-leakage properties of sesbania gum-grafted copolymers

A sesbania gum-g-poly (acrylic acid-co-vinyl acetate) (SG-g-P (AA-co-VAc)) emulsion was prepared by free radical polymerization using environmental-friendly sesbania gum (SG) as raw material and grafted with acrylic acid and vinyl acetate. It was applied to study the performance of preventing water leakage from the soil. The effects of acrylic acid/vinyl acetate (AA/VAc) monomer ratio, neutralization degree of AA, content of ammonium persulfate and polymerization temperature on the properties of emulsion were investigated. Characterization of the emulsion by FTIR, SEM, TGA, and particle size distribution showed that AA and VAc were successfully grafted onto SG. SG-g-P (AA-co-VAc) had good stability under the optimum synthesis condition. Compared to SG, the thermal stability of the product was improved. The consolidation layer was formed after the product was added to the soil, which might reduce the voids between soil particles and reduce the water penetration rate. This greatly expanded its application in the research of anti-leakage performance.     

An investigation of kinetic reaction and decomposition of sodium uranate

For the management of severe accidents of sodium-cooled fast breeder reactor, the coolability of the fuel debris bed on a core support plate is a key concern during the post-accident heat removal phase. In an air ingress scenario, the reactions between the fuel and highly oxidized sodium are likely to form sodium uranoplutonate. This would negatively influence the coolability of the fuel debris bed due to a lowering of the thermal conductivity and density. This study has focused on the formation kinetics of sodium uranate from UO₂ and liquid sodium including oxygen at a high concentration. In this paper, the experiments on reaction initiation temperatures, reaction rates, and the decomposition of sodium uranate are reported.     

Stereoisomeric identification of norephedrine derived from methamphetamine or amphetamine: urinalysis results of 33 methamphetamine abusers and 1 amphetamine abuser in Japan

Stereoisomeric identification of norephedrine (NE) derived from methamphetamine (MA) or amphetamine (AM) was investigated by SIM-GC/MS assay using the urine of 33 MA abusers and 1 AM abuser. The assay simultaneously identified TFA-derivatized MA and AM metabolites, including AM, p-hydroxyl-MA (p-HMA), and p-hydroxyl-AM (p-HAM). The analysis lasted approximately 43 min, with a signal-to-noise ratio of >or=3 and a detection limit of 50 ng/mL. Among 12 urine samples from different subjects, only the S (+) form of MA and its metabolites (AM, p-HMA, p-HAM) was detected, however, a (1R,2S)-(-)-NE stereoisomer was also identified. Among the urine samples of two subjects, only the R (-) form of MA and its metabolites (AM, p-HMA, p-HAM) was detected, while NE was not detected. Following urinalysis of urine obtained from 19 MA abusers and 1 AM abuser, only the (1R,2S)-(-)-NE stereoisomer was identified, while unmetabolized MA, AM, and their metabolites (p-HMA, p-HAM), showed stereoselective metabolism. Although (1R,2S)-(-)-ephedrine (EP) alone was found in the urine of 1 (S)-(+)-MA user and 1 (S)-(+)- and (R)-(-)-MA user among 33 MA users, it was not present in the urine of the remaining 31 subjects. Therefore, (1R,2S)-(-)-NE was likely not of (1R,2S)-(-)-EP origin and was most likely from (S)-(+)-AM of the MA metabolite. The production ratio of (1R,2S)-(-)-NE to (S)-(+)-AM ranged from 0.01 to 0.25 in MA abusers and was 0.12 in AM abusers.     

Adaptively controlled supercontinuum pulse from a microstructure fiber for two-photon excited fluorescence microscopy

Selective fluorescence excitation of specific molecular species is demonstrated by using coherent control of two-photon excitation with supercontinuum pulses generated with a microstructure fiber. Pulse shaping prior to pulse propagation through the fiber is controlled by a self-learning optimization loop so that the highest fluorescence signal contrast between two fluorescent proteins is obtainable. The self-learning optimization loop successfully controls both the optical nonlinarity of the microstructure fiber and the two-photon excitation of the fluorescent proteins.     

Transport of carnitine and acetylcarnitine by carnitine/organic cation transporter (OCTN) 2 and OCTN3 into epididymal spermatozoa

Carnitine and acetylcarnitine are important for the acquisition of motility and maturation of spermatozoa in the epididymis. In this study, we examined the involvement of carnitine/organic cation transporter (OCTN) in carnitine and acetylcarnitine transport in epididymal spermatozoa of mice. Uptake of both compounds by epididymal spermatozoa was time-dependent and partially Na(+)-dependent. Kinetic analyses revealed the presence of a high-affinity transport system in the spermatozoa, with K(m) values of 23.6 and 6.57 muM for carnitine and acetylcarnitine respectively in the presence of Na(+). Expression of OCTN2 and OCTN3 in epididymal spermatozoa was confirmed by immunofluorescence analysis. The involvement of these two transporters in carnitine and acetylcarnitine transport was supported by a selective inhibition study. We conclude that both Na(+)-dependent and -independent carnitine transporters, OCTN2 and OCTN3, mediate the supply of carnitine and acetylcarnitine to epididymal spermatozoa in mice.     

Drug-eluting microarrays for cell-based screening of chemical-induced apoptosis

Traditional high-throughput screening (HTS) is carried out in centralized facilities that require extensive robotic liquid and plate handling equipment. This model of HTS is restrictive as such facilities are not accessible to many researchers. We have designed a simple microarray platform for cell-based screening that can be carried out at the benchtop. The device creates a microarray of 2100 individual cell-based assays in a standard microscope slide format. A microarray of chemical-laden hydrogels addresses a matching array of cell-laden microwells thus creating a microarray of sealed microscale cell cultures each with unique conditions. We demonstrate the utility of the device by screening the extent of apoptosis and necrosis in MCF-7 breast cancer cells in response to exposure to a small library of chemical compounds. From a set of screens we produced a rank order of chemicals that preferentially induce apoptosis over necrosis in MCF-7 cells. Treatment with doxorubicin induced high levels of apoptosis in comparison with staurosporine, ethanol, and hydrogen peroxide, whereas treatment with 100 μM ethanol induced minimal apoptosis with high levels of necrosis. We anticipate broad application of the device for various research and discovery applications as it is easy to use, scalable, and can be fabricated and operated with minimal peripheral equipment.     

Dependence of process characteristics on atomic-step density in catalyst-referred etching of 4H-SiC(0001) surface

Catalyst-referred etching (CARE) is a novel abrasive-free planarization method. CARE-processed 4H-SiC(0001) surfaces are extremely flat and undamaged over the whole wafer. They consist of single-bilayer-height atomic steps and atomically flat terraces. This suggests that the etching properties depend principally on the atomic-step density of the substrate surface. We used on-axis and 8 degrees off-axis substrates to investigate the processing characteristics that affect the atomic-step density of these substrates. We found a strong correlation between the removal rate and the atomic-step density of the two substrates. For the on-axis substrate, the removal rate increased with increasing surface roughness, which increases with an increasing atomic-step density. The removal rate ratio is approximately the same as the atomic-step density ratio of the two substrates.