煤的比能估算新数学模型

1 前言煤的比能(或发热量)是确定煤的性能、煤阶以及评估煤燃烧特性的重要参数之一。为此已研究出许多估算煤的比能的数学模型,如先前采用的数学模型一般形式: SE_(dmmf)=a_1[C] a_2[H] a_3[S] a_4[N]-a_5[O] a_6(1～8)式中SE——煤的比能,MJkg~(-1); [C]等——在煤中元素的无水无矿物质基百分率表1给出了8个方程式的系数值,其主     

A complex biological system: the fly's visual module

Is the characterization of biological systems as complex systems in the mathematical sense a fruitful assertion? In this paper we argue in the affirmative, although obviously we do not attempt to confront all the issues raised by this question. We use the fly's visual system as an example and analyse our experimental results of one particular neuron in the fly's visual system from this point of view. We find that the motion-sensitive 'H1' neuron, which converts incoming signals into a sequence of identical pulses or 'spikes', encodes the information contained in the stimulus into an alphabet composed of a few letters. This encoding occurs on multilayered sets, one of the features attributed to complex systems. The conversion of intervals between consecutive occurrences of spikes into an alphabet requires us to construct a generating partition. This entails a one-to-one correspondence between sequences of spike intervals and words written in the alphabet. The alphabet dynamics is multifractal both with and without stimulus, though the multifractality increases with the stimulus entropy. This is in sharp contrast to models generating independent spike intervals, such as models using Poisson statistics, whose dynamics is monofractal. We embed the support of the probability measure, which describes the distribution of words written in this alphabet, in a two-dimensional space, whose topology can be reproduced by an M-shaped map. This map has positive Lyapunov exponents, indicating a chaotic-like encoding.     

Portable sick house syndrome gas monitoring system based on novel colorimetric reagents for the highly selective and sensitive detection of formaldehyde

Formaldehyde (HCHO) emitted from the furniture and the walls in the rooms injures the eyes, nose, and respiratory organs and causes allergies, which is called sick house syndrome. We designed and synthesized novel colorimetric HCHO-sensing molecules (KD-XA01 and KD-XA02) which possess an enaminone structure and developed a hand-held instrument to monitor indoor HCHO gas with the use of KD-XA01. These sensing molecules produced speedy color changes from colorless to yellow under mild conditions, which was caused by the fact that the enaminone structure in the reagent reacts with HCHO to give a lutidine derivative. This reaction took place not only in the solution phase but also in the solid phase (surface of the cellulose paper). To take advantage of this phenomena, a handy and rapid monitoring system has been developed for detecting indoor HCHO gas using a highly sensitive and selective detection tablet constructed from the porous cellulose paper that contains silica gel as an adsorbent, KD-XA01, and phosphoric acid under optimum conditions. This instrument detected the surface color change of the tablet from white to yellow, which was monitored as a function of the intensity of the reflected light illuminated by an LED (475 nm). The response was proportional to the HCHO concentration at a constant sampling time and flow rate; 0.05 ppm HCHO, which is under the standard value set by the World Health Organization, was able to be detected in 5 min. The detection limit was 0.005 ppm. This monitoring system was not interfered by carbonyl compounds such as acetaldehyde and acetone, alcohols, hydrocarbons, and typical gases such as carbon monoxide, carbon dioxide, nitrogen dioxide, etc., which contributes to the measurement of correct HCHO concentrations. It was possible to monitor the HCHO gas in the room of a new apartment and school using this instrument; the response values were in good agreement with those obtained by the standard DNPH method. This highly sensitive, selective, and handy HCHO gas monitor is widely applicable and convenient for users who are not specialists in this field.     

A flow method with photocatalytic oxidation of dissolved organic matter using a solid-phase (TiO2) reactor followed by amperometric detection of consumed oxygen

A photocatalytic sensor for the determination of chemical oxygen demand (COD) using titanium dioxide, based on the use of a pair of oxygen electrodes and flow injection analysis, is described. The measuring principle is based on the direct determination of the oxygen concentration change resulting from photocataltic oxidation of organic compounds. One of the two oxygen electrodes, the reference oxygen electrode, was utilized to measure the reference signal responding only to oxygen present in the injected samples. Oxygen consumption due to the TiO2-catalyzed photochemical oxidation of organic compounds in samples was monitored with the working oxygen electrode. The COD value of this sensor was calculated as the difference of the currents at reference and working oxygen electrodes, respectively. The operation characteristics of the sensor are demonstrated using artificially treated wastewater as a substrate. The sensor was also applied to the determination of COD in real water samples from dam reservoirs (n = 20) all over Japan. The results were in good agreement with those from the conventional COD methods (i.e., permanganate and dichromate methods).     

Application of femtosecond laser ablation time-of-flight mass spectrometry to in-depth multilayer analysis

A femtosecond laser system was used in combination with a time-of-flight mass spectrometer (TOF-MS) for in-depth profiling of semiconductor and metal samples. The semiconductor sample was a Co-implanted (10(17) ions/cm3) silicon wafer that had been carefully characterized by other established techniques. The total depth of the shallow implanted layer was 150 nm. As a second sample, a thin film metal standard had been used (NIST 2135c). This standard consisted of a silicon wafer with nine alternating Cr and Ni layers, each having a thickness of 56 and 57 nm, respectively. An orthogonal TOF-MS setup was implemented. This configuration was optimized until a sufficient mass resolution of 300 (m/delta m) and sensitivity was achieved. The experiments revealed that femtosecond-laser ablation TOF-MS is capable of resolving the depth profiles of these demanding samples. The poor precision of the measurements is discussed, and it is shown that this is due to pulse-to-pulse stability of the current laser system. Femtosecond-laser ablation TOF-MS is shown to be a promising technique for rapid in-depth profiling with a good lateral resolution of various multilayer thin film samples.     

Surface shape measurement by phase-shifting digital holography with a wavelength shift

Surface contouring by phase-shifting digital holography is proposed and verified by experiments and numerical simulations. Digital holograms are recorded before and after mode hopping of a laser diode subject to current tuning, and the difference of the reconstructed phases at each wavelength is computed to deliver surface contours of a diffusely reflecting surface. Since normal incidence on the object is employed, the method does not need the removal of the tilt component and is free from the shadowing effect as advantages over the dual-incidence method proposed before by the first author.